Posts by steve29662

Thought the AP8 sim could use a genuine and clone image , my box is a clone so what's the best sim to use and where to buy

thanks Steve

ok UPDATE AGAIN well don't look good anyay pulled the sim out 2.01 defo, cleaned it and the pins put it back no joy, DREAM MULTIMEDIA>>>>> ERROR, look this up on the web , the sim is corrupted, ok got a question or two what sim cards can you use as a replacement i.e a 2.10 or AP8 or only a 2.01 ??????? and where to buy one

regards Steve Thanks

ok thanks, defo sim 2.01 , I've opened the box and its on the sim, tried putting bootloader on after image, can you recommend a image

regards Steve

Well its done my head in, got rid of the CA ERROR got an ip address , but every image I've tried to put on is invalid. got bootloader 84 on , seem to have no problem changing the bootloader, but a image no way, I can get the web browser up , reads the box info ect , defo a 800hd only

Thanks Steve

ok UPDATE every time I tried to clear the CA ERROR via the com port just went through the flashing program and would reboot and the CA ERROR would be there ???????? so getting nowhere I pulled the power plug out as it flashed , as it rebooted the ip address showed up, so held the front button in and then switched to load image , well worked sort of just keep getting invalid image, but when it rebooted the CA ERROR gone it just hangs on booting now, the images I have tried as follows / BlackHole-1-5-1-ramiMAHER.nfi , nemesis_2.2_svn78_mod_lucifer_ssl82.nfi and sim201-SS82-de-133dv3PHOENIX2-dm800-13052011.nfi all invalid now my box is a 800hd 2.1 sim

tegards Steve

tried old and new ncf programs still no joy

thanks Steve

well it knackered, ok got the com port reading it on the optiflasher (yippee) , but it won't get rid of the CA ERROR tried all the 800hd ssbl 82 83 ect, now mine came with 74c on it, but can't fid it anywhere any ideas anyone

regards Steve

well a old htpc looking into it lol, trying to find the bit and bobs , like a mouse and keyboard, if I can remember what they look like ;-)

Found out it only a 800hd model not the se one, there's no button or mini usb service port on the back, just the rs 323 (9 pin) com port, but having window 10 the com port giving a error, so won't detect, so I really need drivers for window 10

thanks Steve

thanks for your CA Error, well I've changed my laptop to windows 10, now the com drivers wont work ........can't detect port, I go into device manger and the com port has a error 10, I ve tried to find driver what will work but no joy . so if anyone has any drivers what work on windows 10 please help

regards Steve

- - - Updated - - -

thanks for your CA Error, well I've changed my laptop to windows 10, now the com drivers wont work ........can't detect port, I go into device manger and the com port has a error 10, I ve tried to find driver what will work but no joy . so if anyone has any drivers what work on windows 10 please help

regards Steve

Not your usual problem, am quite good when it comes to loading images onto dreamboxes the usual problem I have is when I try to send a image via my browser it won't send and don't come up with any errors, the image on at the moment is stuck on booting to second stage, now I have restarted the box holding the front button in and get a ip address and STOP, then I put the io address into my browser and get the firmware update page, I can read box info too/
but when I try to flash no joy nothing happens, left it as long as ten minutes NOTHING, now I am not thick LOL, I have mended boxes with NO CR ERROR so I have some idea, ok let me tell you I can not HTTP the box via DCC, now when I put the STOP ip address into DDC I get Telnet connection only, anyone had the same problem ???? if so please enlighten me so I can get a new image on this box.

Regards in advance

Steve

Hi all, Just to let you know the way I move my plugins to make more space in to use telnet on DCC copy and paste this:

init 3
mv /usr/lib/enigma2/python/Plugins /media/usb
ln -s /media/usb/Plugins /usr/lib/enigma2/python/Plugins
init 4

the box goes black leave for 5 mins then reboot done.

regards Steve.