Posts by easkey

Will it work with OpenVix?? image

All the Best for 2016

Thanks for all you HELP!!:thumb::red::red:

Hope this helps someone.

Have my Miraclebox Premium Ultra HD a few weeks now!
And I am on a learning curve (BIG TIME).
So I will impart some of the things I have learned to help others
who has just bought the box.

This Tutorial is made with Miraclebox Premium Ultra

HOW to use CCCam and NewCamd Servers with MgCamd.

Connect with Miraclebox Premium Ultra.( FTP to box)

Place files below in Root/var/keys on Satellite BOX.
This is where you add files Eg … cccamd/mg_cfg and newcamd files

To add C-Line
go to the var/keys and edit cccamd.list. Left click and edit. (use Notepad)

To add N-Line
go to the var/keys and edit newcamd.list Left click and edit. (use Notepad)

NOTE:
Change (N) at start of N-Line to “CWS =” and add “server1” at the End.

Eg..
N: other.dyndns.tv 99999 user password 01 02 03 04 05 06 07 08 09 10 11 12 13 14
Change to…….
CWS = other.dyndns.tv 99999 user password 01 02 03 04 05 06 07 08 09 10 11 12 13 14 server1

In mg_cfg file Left click and edit. (use Notepad)

These are the Settings you need.....

Go to the “box type”

there you see different satellite Boxes. (use dreambox/mips)
Set to B:{ 06 }

Now in “network mode”

Here you can activate the cams you want to use.
{ 01 } is for Newcamd or N-Line. ONLY
{ 32 } is for CCCam or C-Line. ONLY

Just change the number in the { xx } to use Two Cams options.
Eg……{ 33 } --- Sum of the Two cams

01 is for Newcamd and 32 is for CCCam (01+32 = 33)
G: { 33 } set it like this to use both CCCam and NewCamd server with MgCamed.

Then SAVE and CLOSE notepad ……….. JOP COMPLETE

I have uploaded the Three files you need for this…
COPY and PASTE your lines into cccamd and newcamd files and SAVE!!!

UnZip and leave the mg_cfg file as it is!! (It's ready to use)

ENJOY

Hope this helps someone!!!

Example Lines...

C: your.dyndns.tv 54655 user password (c-line)
N: other.dyndns.tv 99999 user password 01 02 03 04 05 06 07 08 09 10 11 12 13 14 (N-line)

HOW TO MAKE Ccam file

Open Notepad on your PC.

Paste you c-line into Notepad
Save As a .cfg __ file to your desktop.

HOW TO MAKE Newcamd file

Open Notepad on your PC.

Paste you N-line into Notepad
Save As a .list __ file to your desktop.

Now they ready to add to STB.

Hope this helps someone!!

Password for Miraclebox Premium STB.

UserName… blank / root
Password…. blank / password / dreambox

Hope this helps someone……

When your EPG stops working and will not download.

ERROR....... Timeout for tuner lock

This how to FIX!!! …. Astra 28e…..

Epg is only found on this freq -- DVB-S, QPSK, 11778 V 27500 2/3

d0b3c8400b0ec7584.png

Check to see are you receiving this frequency as it carries all EPG info for Astra 28.

If not then check all connections to STB.

eg Cables, F connecters, LNB Connection until you have a signal!!

When your signal is there(back) - scan frequency and restart GUI.

Now you EPG should work again...

Hope it's Ok to Post??

Openvix 3 2 016 Release Mbultra Usb (57.6M)
Last modified October 25, 2015 at 6:41 pm

Openvix 3 2 018 Release Mbultra Usb (57.7M)
Last modified October 28, 2015 at 1:22 am
Openvix 3 2 019 Release Mbultra Usb (57.7M)
Last modified October 29, 2015 at 8:56 pm

Openvix 3 2 020 Release Mbultra Usb (57.7M)
Last modified November 1, 2015 at 1:50 am

Openvix 3 2 021 Release Mbultra Usb (57.7M)
Last modified November 3, 2015 at 8:35 pm

All at ....
http://www.openvix.co.uk/index…box-images/premium-ultra/

Enjoy....

OK........
Tried mgcamd 1.35a. -- Not working:62:

Line is working on CCam 2.3.0 ( N LINE )

Put my N line on bottom line below......... ( thanks to voyager1972 ) and SAVED!

CWS_KEEPALIVE = 300
CWS_INCOMING_PORT = 21000
CWS = 127.0.0.1 10000 local local 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan newcs
CWS = 127.0.0.1 10001 local local 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan newcs

CWS = yourdyndns.org 12000 username password 01 02 03 04 05 06 07 08 09 10 11 12 13 14

Placed mg_cfg -- file in -- ( root - var - keys )

I am on a learning curve here --- :83: thanks for the help.....:thumb:

:14_002:

Thank you --- Will try and i will come back later.
Kids watching tv now!

Quote from master G

Try the attached version of mgcamd. Configs are found in /usr/keys..

Thank you..... A little getting back:59:

BOX -- Miraclebox Premium Ultra - Latest OpenViX images.

Tried mgcamd 1.38. (from downloaded "Plugins")
But Not working getting this ... below
53400495f4f1183d7c7.jpg

Changed N to CWS =
Thank you

Quote from 50pounds

I know its old ive been trying for weeks to get mgcamd to work on my open pli 4 your the daddy thank you!! :D

I also have been trying for weeks to get my mgcamd line working on my Miraclebox Premium Ultra.
Have cccam line working well.
cccam line in Root-var-ect .......... in CCcam.cfg file.
mgcamd line in Root-var-keys ........ in mg_cfg file (also tryed newcamd.list)

Any help Gracefully excepted !!!:16_002: