Not good for Zgemma H7 S (armv7ve OpenSSL-1.0.2 libusb)
I updated oscam-icam downloaded from openatv softcam feed with the first bin in the list and works perfect (Evo Enfinity X2+ broadcom).
With the Maxytec Multi 4K I used the patched oscam ipk and works perfect.
Samur has given excellent tutorial and provided all files needed, thank you Samur :-)
Best for you to go with ipk, maybe even fresh image update.
Display Moresome fixes:
> Improvement of ICAM-StreamRelay for almost all devices.
(Icam is running better, most time with zapping there is a picture immediately.)
> freezing image on some channels like: Sky Sport F1 HD (19°E).
> phenomenon crashes of oscam with IPv6.
> Fixed bug with 64 bits Devices like: DM ONE/TWO/SEVEN, Ubuntu/Debian X86_64,...etc
###
> Add "Russkiy Mir" Emu Support 56°E.
Notes:
making your smartcard working you will need k1 key like with Sky DE.
If using radegast change:
- Include ECM in HTTP streams - YES
- Descramble HTTP streams - NO
- Descramble received HTTP streams - NO
- Load unlinked userbouquets - YES
If using dvbapi change:
- Include ECM in HTTP streams - NO
- Descramble HTTP streams - YES
- Descramble received HTTP streams - NO
- Load unlinked userbouquets - YES
To get things working with icam
1. You need a valid card or a card share, for either sly DE, sly UK or Sly IT. If you want all 3 you need all 3 cards/ shares.
2. Oscam emu bin with icam patch for the required package,
the one in the first post is patched for all 3. Rename the bin your replacing correctly and give it 755 Permissions.
3. The corrrect oscam configs. Attached to the first post is some basic configs, with example readers.
4. An icam channel list for each package you require. ciefp setting has all 3 https://www.linuxsat-support.com/filebase/file/290-enigma2-ciefpsettings/#versions UK users can use ABM and custom mix, thx dsayers or KiddaC list attached.
5. the correct STB settings as posted above.
OR:
Below is an IPK that should work on all STB's. VIX users should use the script method for softcams.
As always backup your image before trying any changes.
The IPK contains the patched bin for ARM and MIPS STB's and the basic configs.
############################################
IPK for installation on Enigma2 receivers attached here
#enigma2-plugin-softcams-oscam_11718-emu-icam_all.ipk#
############################################
Stream relay bouquet files on line below
userbouquet.sky-de-it-uk-icam-01-10-23
Please, don't send me PM because i will not responds.
Thanks,
;
For most people, the ipk above will suffice and is easiest to use. However, for those wanting the binary files, they are are attached below.
To use the binary, firstly, install an oscam from your image's plugins server. Download the binary relevant for you receiver. Rename the binary to match the one that is installed in your receiver . Ensure it has 755 properties.
mipsel libusb binary
OSCam-11718-798 (mipsel libusb).zip
arm7ve binary
arm7ve libusb binary
OSCam-11718-798 (armv7ve libusb aio ipv6).zip
arm7ve libusb pcsc binary
OSCam-11718-798 (armv7ve libusb pcsc).zip
ubuntu i686
OSCam-11718-798 (Ubuntu i686).zip
ubuntu 64bit
OSCam-11718-798 (Ubuntu x86_64).zip
aarch64
qnap arm libusb
OSCam-11718-798 (qnap arm libusb).zip
mipsel libusb aio ipv6
OSCam-11718-798 (mipsel libusb aio ipv6).zip
arch64 libusb ipv6
OSCam-11718-798 (aarch64 libusb aio ipv6).zip
sh4 binary
Hi all, I have a maxytec 4K multi, I think it`s arm7 but not sure which binary to use.
Could anyone advise please?
Already installed oscam-icam from openatv softcam feed.
someone correct me if i`m wrong, but I think 1080i is the highest definition broadcast via satellite and anything higher like 1080p is upscaled by your stb and in the case of uhd I think they are streamed or downloaded to stb while streaming from the cache. I`m probably wrong, but makes sense to me :)
Display MoreHi,
I have an Octagon SF8008, open atv 6.2 wooshbuild, and my satellite picture freezes approx every 10 seconds.
I have oscam modern 1532, oscam svn 11523 solo 4k, oscam you 1859 arm, oscam 11507 arm emu and it is the same with them all. (also freezes with cccam 2,3.2 arm)
Does anyone know if there are better cams to use or what I can do to resolve it?
I am new to all of this so I could be doing things wrong.
Try your server cccam 2.3 or above, new emu don`t seem to like cccam 2.0 server end.
So if you have clines try deleting any below 2.3.0 in your cccam.cfg
Using OpenViX you can set the tuner to use both Satellite S2 and Terrestrial T2. Then use Autoboquetsmaker to scan if you are UK based. Or do a manual complete terrestrial scan.
Thanks for that :thumbup: I suppose it`s a driver issue for the oenatv image. I`ll try the vix image on multiboot :) cool box and very happy with it up to now. If android is released will be a nice bonus but well worth the dosh as is. :thumbup:
I have this box from the sponsors with openatv 6.3 image. Has anyone worked out how to do a dvbt2 terrestrial scan?
I have downloaded a terrestrial scan from the openatv feeds but does not recognize the tuner.
Any help would be much appreciated :thumbup:
Display MoreAm I missing something? Openatv 6.3 image is installed.
OpenATV has exactly this CCcam on the feed.
The only problem is, that the softcam feed is not pre-installed with the image for legal reasons, so you have to add the softcam feed yourself:
- or -
Thanks Spacerat, got it sorted from your link to the oatv feed :) I have to change server end to 2.3 as 2.0 versions cause freeze.
It`s the same on 3 different boxes, 2 mips and 1 arm.
Problem sorted, I only put server on cccam 2.3.0 and now works without freeze.
yes this works, I had 2 servers cccam 2.0.11 and 1 server 2.3.0 on my cfg file. I deleted the 2 servers cccam 2.0.11.
The server on cccam 2.3.0 works without freeze :thumbup:
Hi, thanks for reply Cosy, I didn`t know that I needed to use oscam with my cccam.cfg file.
Is there any tutorials on doing this as I`ve never used oscam before.
cheers.
Ignore all that, got it working with cccam emu from the softcam feeds but freezes every 10 seconds.
Any ideas anyone?
Hi, just received a maxytec multibox from the sponsor and can`t get cccam emu installed. Copied to tmp folder and seemed to install ok but no softcam panel. This is the first arm processor receiver I`ve owned and only had broadcom previously.
Am I missing something? Openatv 6.3 image is installed.
Thanks for any help,
Cheers.
