27/11/2022
QuoteTelnet
dpkg -i /tmp/*.deb
Thanks Levi45 For The *deb file
I can not install it, it says unknown compression method. s there something wrong with the file or am I doing something wrong? here is the mesaage:
Try this deb.
Thank you. It did install, but it did not appear in the plugin list. That may be because I am using Barry Alen. Thanks anyway.
I can not enter into settings menu, every time I try it, it crashes. I am using dreambox two with Merlin image (Merlin_OE-2.6-dreamtwo-experimental-20220830). This is what my crash screen shows? Any solutions?
Thanks in advance.
27/11/2022
QuoteTelnet
dpkg -i /tmp/*.deb
Thanks Levi45 For The *deb file
I can not install it, it says unknown compression method. s there something wrong with the file or am I doing something wrong? here is the mesaage:
...Thank you
there will not be many changes, there is nothing new to add
its glory is now gone, but it still works for now
Don't say that. It is still the best one in its category. Its glory will never go as long as the servers work. Thank you.
Hi BextrH
I think it is time to renew the servers again if it is not too much trouble for you.. The waiting time is again tooo long.
Thanks in advance.
Hi BextrH .
There are a couple of servers that are makes waiting too long. Can you check them and give a new update if it is not too much trouble?
Thanks a lot.
Display MoreDisplay MoreDisplay Moredreambox 900 bariyelen 12.91 und gutemine 2.9-r27
openatv 6.4 tamam
pure2 6.5 tamam
openpli 11.2 tamam
cfg_Zoom_Final_FIX7x_030422_all.ipk
saf2 6,5
openatv 6,4
openpli 11,2
2.0 imagelarda sorun yok. *.ipk ler tabii ki oluyor. 2.5 ve 2.6 lar yani *,deb ler olmuyor.
yukardaki yazımda şunu yazdım onu anlamadınız yanılmıyorsam yabancı dil olduğu için
dreambox 900 bariyelen 12.91 flaşh unstable imaj üzerinde gutemine 2.9-r27 yüklü unstable imajda
eklentiyi komutla veya manuel dahil atıyorsunuz
dreambox 900 kapatıp açın
eklenti yok eklenti bölümünde siliniyor bu sorundu bu sorunu çözebilirler bu hata bilgisini verdim
ayrıca manuel eklenti yüklemesinde bütün canel mod ları değiştirdiğim halde siliniyor eklenti
enigma2-plugin-extensions-cfg_Zoom_Final_FIX7xall.deb
I wrote this in my article above, if you don't understand it, if I'm not mistaken, because it is a foreign language
dreambox 900 barrier on 12.91 flash unstable image with gutemine 2.9-r27 installed on unstable image
you are throwing the plugin with command or manually including
close and open dreambox 900
there is no plugin, it is deleted in the plugin section, this was the problem, they can fix this problem, i gave this error information
Also, the plugin is deleted even though I change all the canel mods in manual plugin installation.
enigma2-plugin-extensions-cfg_Zoom_Final_FIX7xall.deb
Ben de aynı şeyi söylüyorum. 2.5 imaj BA üstüne kuruluysa siliniyor. Direk flasha kurulu olursa silinmiyor. Ancak yukardaki *deb dosyasini kurduktan sonra manuel olara Pulgin_uprate.sh i da bir kere çalıştırmak lazım.
Display Moredreambox 900 bariyelen 12.91 und gutemine 2.9-r27
openatv 6.4 ok
pure2 6.5 ok
openpli 11.2 ok
cfg_Zoom_Final_FIX7x_030422_all.ipk
pure2 6.5
openatv 6.4
openpli 11.2
2.0 imagelarda sorun yok. *.ipk ler tabii ki oluyor. 2.5 ve 2.6 lar yani *,deb ler olmuyor.
Display Moredreambox 900 bariyelen 12.91 unstable imaj und gutemine 2.9-r27
unfortunately not installed
image close open
no plugin delete
enigma2-plugin-extensions-cfg_Zoom_Final_FIX7xall.deb
dreambox 900 bariyelen 12.91 und gutemine 2.9-r27
openatv 6.4 ok
pure2 6.5 ok
openpli 11.2 ok
cfg_Zoom_Final_FIX7x_030422_all.ipk
IT is not installed when Barry Allen is present. Gutemine is erasing it.
Dostum, BA üzerine kurulu imajlarda bu plugini yüklemek mümkün değil. Flashe kurulu gutemine olmayan imajlara kuruluyor sadece.
Fair enough but I never need to change anything it just works. The important thing is disablecrccws=1 but the plugin sets it to 0 after any update.
Open conv.sh. Find the line echo "disablecrccws = 0" >> $OUTPUT2 and Just change "0" to "1". It should work.
OK
it doesn't matter how you install it
the important thing is that you get him there
you better deal with what works and what doesn't,
or what you would like to create a new
Sure. That's exactly what I am saying. It is working now both on OE2.5 and OE2.6. You have done a great work with this new Plugin-Update.sh script. Congrats and thanks a lot.
Ok, I understand what you are telling. But the question is the same.
Why should I bother myself to install the deb file beforehand, if I still have to run the script plugin-update.sh?. The plugin installs the zoom anyway without installing the deb file first. Just put the plugin in tmp, run it, and you have zoom installed perfectly.
Display Moremit dpkg -i /tmp/*.deb geht nicht
1:Newnigma2 services
2:Softwareverwaltung Paketmanagert
3:offline installation
dan automatic newnigma neue start
über Dcc usr/script Plugin-Update hereinbringen
dan aktualisiren Zoom
OK, I understand, but IF I will have to run "Dcc usr/script Plugin-Update" anyway, then there is no need to install the deb file beforehand, because the script installs the plugin from zero anyway. Will there be any difference between installing first the deb file followed with update script from DCC and running the script directly without installing the deb file first?
Newnigma2 ok
I am sorry but this DEB file did not work for me. I am using newnigma2 on flash of dreambox Two. I had to uninstall and reinstall with Plugin-Update.sh, which is working perfectly. Here is the log:
Display MoreOK, fine
I will have to edit another 500 scripts later :-)
Not OK ... restart Oscam
Please run this script.
Photo....
I created this restart together with the user ... Chocholoušek
This script restarts CAM * in the plugin ... ZOOM
Even though in the logs it says no OSCAM found, I am fairly certain that it DOES restart the oscam.
Display Morefault123 ....OK
1.update now ... ZOOM
2. then try the function ... visible download of all servers
3. take a picture
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Please run the previous script and check the /etc/CCcam.cfg file to see if there is a downloaded line
Also check the /etc/tuxbox/config/oscam.server file
if a line was transferred there
Thank you
Worked perfectly. I updated it within the plugin itself. I checked both file. They were written with new lines. Here is the picture.
Display Morefault123 ...please run this script and take a photo
Thank you
I have to try it on Dreambox and find a solution for the command ... cd
I don't have a Dreambox
Can anyone with Dreambox try and .. take pictures?
Thank you
Here it is
Display Morethank you for the information and slide
I don't know exactly what message
one of the messages indicates that it was not installed or uninstalled, only deleted. If IPK has been installed, it will write that cfg-ZOOM has been uninstalled as ..root
For Dreambox, it is not installed, but only copied. There is no installation record.
does the update from ... ZOOM work for you?
Yes, it does work. Before update my zoom was in english yanguage, after update it started again in original language, (Polish, I think?), I ran it, it updated the servers, I checked the files, thew were all new. One thing I am not sure is that I dor't krow if it was able to restart the cam or not. Here is the slide:
Display More
That DID update. I know that it is updated, I checked the files. Congrats. Though still there was a minor error message. Here it is:
Display Moreat this point, this script has been added to the downloaded version
this script should theoretically install ZOOM on dreambox even if it is not there, I have no way to try
needed ... curl
put in /tmp/
commands ....
chmod 755 /tmp/Plugin-Update.sh
/tmp/Plugin-Update.sh
.....................................................
I hope this Dreambox recognition will work
thank you in advance for information about whether the update works on Dreambox, I don't have Dreambox
I tried it, unfortunately did not work. Here is the message I got:
