Posts by sugarmanroy

I have solved my problem, its working fine :) .......

thanks :)

Quote from robocop1967

Yes,that is how it should look.Have you activated mgcamd on your Blackhole image?Blue button,highlight cam,ok to activate

yes I have but still nothing mmmmmmmm :(

- - - Updated - - -

point o situaton.... still not working

This time I deleted everything, on my vu zero I have this now...
blackhole 2.1.7
mgcamd 1.3.8

can anyone please see if my newcamd file and mg_cfg files are ok

usr/keys/newcamd I have this

##########################
###LINUXSAT-SUPPORT.COM###
##########################

CWS_KEEPALIVE = 300
CWS_INCOMING_PORT = 21000
CWS = 000.0.0 9999 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan
CWS = 111.1.1 9999 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan

obviously not my n lines

on mg_cfg its like this

##########################
###LINUXSAT-SUPPORT.COM###
##########################

# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }

# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 02 }

# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 01 }

# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 01 } 0x12c0

# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccamd netclient, card list saved as /tmp/cccamd.info
# (ECM only, supported server version up to 2.1.1, later not work)
G: { 33 }

# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 00 } 5 30

# network ecm timeout in seconds
K: { 05 }

# newcamd dead routes connect retry, sec
Q: { 600 }

# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 00 }

# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password

# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80

# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 00 } 192.168.1.8 28007 /tmp/mgcamd.log

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }

# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E:) time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }

# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 04 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 06 }

# map all 180x nagra caids to 1801
# default is 01
F: { 00 }

Master G I done what you said, ftp the mgcamd and also tried enigma 2 plugin to do on blackhole 2.1.7 and when I go to install it gives me a error.. I tried it on the blackhole 2.1.6 and it just says progress and after a while time out and does not move from there and I tried the blakhole 3.0.2 and the same thing.... thanks for helping any more clues?

- - - Updated - - -

iv been going on this for hours and still cant get to install mgcamd grrrrrrrrrrr ..... I try to send it through ftp put it in tmp try to install and its alwas in progress and eventually times out, I try put it through memory stick and try to install it says 0 packages 0 erros , also doesnt work.... iv tried blackhole images 2.1.7 and 2.1.6 and 3.0.2 and all the same... im going insane lol

- - - Updated - - -

I finally got to put mgcamd 1.45a with blackhole 2.1.7 :)

now ftp in the usr/keys/newcamd.list it looks like this

CWS = ip_server port login parol 01 02 03 04 05 06 07 08 09 10 11 12 13 14
CWS_CONNECT_TIMEOUT = 120
CWS_KEEPALIVE = 120

do I put my lines on top to look like this?

CWS = 000.000.1.1 6666 dummy dummyl 01 02 03 04 05 06 07 08 09 10 11 12 13 14
CWS = 000.000.1.1 6666 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14
CWS_CONNECT_TIMEOUT = 120
CWS_KEEPALIVE = 120

and 1 more thing, must I replace the mg_cfg that comes with the mgcamd 1.45a with the one thats in the keys?

- - - Updated - - -

Master G is the Linuxsat Panel working? I ask you because I ftp the linuxsat panel to tmp folder then try to install it but it asks me to update it so I press yes and then it starts looking for update 0% 0% 0% ans so onwards.. in the end there is no update and the linuxsat in the plugins if u click on top of it, it does nothing its blocked and the only way to get rid of it is to put another image.... if it was working it would be great then I could get the mgcamd from there as I havent got the mgcamd1.45a working yet

- - - Updated - - -

after reading for a few hours here in the forum I now have mgcamd 1.38 with blackhole ... I telnet mgcamd.ipk with this opkg install -force-overwrite /tmp/*.ipk and voila :)

I now have on my vu zero blackhole 3.0.1 with mgcamd 1.38
But I still dont have a Beautiful garden. on my usr/keys newcamd .list I have my n lines like this, obviously these are not my n lines.....

CWS_KEEPALIVE = 300
CWS_INCOMING_PORT = 21000
CWS = 000.000.0.0 9999 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan server1
CWS_MULTIPLE = 111.111.1.1 9999 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan server2

is this how it should look like?

Do I have to do anything on the mg_cfg file?

I have a vu zero and i put a image Black Hole 2.1.7 MultiBoot, i then put mgcamd 1.3.8 blackhole 2 on a memory stick put the memory stick in the usb of the vu, a window pops up to install mgcamd I try to install it put does not unpack, it says 0 package and 0 erros .... can someone please help, thanks

Quote from THE FUGITIVE

This is how it should look

CWS_KEEPALIVE = 300
CWS_INCOMING_PORT = 21000
CWS = 192.168.1.2 20000 20005 10 02 13 04 15 06 17 08 01 10 11 12 13 14

note the 192.168.1.2. is fake as is 20000 and 20005 replace these with line details

Hi fugitive
Where u got 20000 is that the user?
Where u got 20005 is that the pass?
Where u got cws incoming port is that where i put the port number? If so then I know where my problem is....
Ahhhh and insted of ip number i can put for example dummy.dummmy.tv right?

Thanks for helping....

hello

iv put my n line like this with a free server thats working on another box (optibox) that iv got in the lounge

CWS_KEEPALIVE = 300
CWS_INCOMING_PORT = 21000
CWS = xxxx.xxxxxx.xx port user pass 10 02 13 04 15 06 17 08 01 10 11 12 13 14 lan server1
CWS_MULTIPLE = 192.168.1.2 20000:20005 dummy dummy 10 02 13 04 15 06 17 08 01 10 11 12 13 14 lan server2

save this on notepade on filezilla and filezilla says successfully uploaded... but nothing happens on my vu+ zero box no channels open... any idea why?

thanks

thanks for helping robocop, i'll do it right now and will give you my feedback..... :)

- - - Updated - - -

Quote from robocop1967

Evening.First of all install the forum plugin.Then inside that you will find various other stuff you can add to your Vu.(Cams being one of them)Scroll down to the Blackhole cams which is quite near to the top and inside that you'll find different cams for Blackhole,Mgcamd 1.35 and 1.38.Install one of them.All the config files are already in there.Then restart your Vu.Once you have restarted your Vu press the blue and you'll see the cams installed.Press left or right until you see the mgcamd in the box and press ok to start it.Obviously you'll need something in the config file to view encrypted channels but that's how to install your cam

- - - Updated - - -

To get the newcamd file ftp to etc/Keys.It should be in there

okay iv installed the plugin and set mgcamd1.38 as my default cam.. but don't understand when you say "to get the newcamd file ftp etc/keys. it should be in there" can you tell me how to get to the newcamd please?

thanks

hi

I want to install mgcamd in my box vu+ zero with blakhole and really dont know how, can anyone give me some info or a manual on how to install please :(...

thanks
Roy

- - - Updated - - -

iv put mgcamd 1.38 in a memory stick and installed it in my box. I press the blue button and mgcamd 1.38 is set as default cam.... where do I go now in the menu of the box for newcamd? please help

thanks roy