Posts by s1m0nw
-
-
simple... Go into config page of o2 router and give it a fixed channel number rather than auto.
My uncle who stays in my gran house has same modem and I had nothing but bother with it untill i gave it a fixed channel number.
when I went into the config page I seen that the modem wasnt giving the box an ip address then I give it a fixed channel rather than auto and viola it worked.
..................
EDIT
but then again I was using tenda W150 wireless rather than homeplugs I find they have too much interferance with other wireless objects but thats my opinion.
You could give the above a try and see what happens... you will also be able to see if the box has been assigned an ip address.
-
well as it turns out it was widespread, all of my area was cut off lol its back on tho ahh well rant was good while it lasted lol
-
apparantly crimping f connectors affects to signal a wee bit so i figured why the hell do they use em.
My mate had em and i put compression f connectors on and hes say both his snr and the other signal bar were alot higher than usual
-
or even better I go up to dish n fire on water proof compression f connectors lol
-
goto menu setup system timezone and set your own timezone
-
having a wee rant!!!!!!!!!!!
why do fecking satellite installers insist on using crimp f connectors!!!!!!!! especially in scotland where is pisses of rain near enough every other day!!!
it is now pissing of rain and i have 0 snr grr
-
the firmware update reset superhub back to factory settings so if your getting problems with it not accepting ur password put the one thats on the back which is probs "changeme" lol
-
400 MHz MIPS processor
Linux operating system
Media Player
Support for downloadable plug-ins
1 x Smart Card reader, 1 x Common Interface
MPEG2 / H.264 Hardware decoding
1 x DVB-S2 tuner
8-digit segment VFD
512MB NAND Flash, 512 MB DDR SDRAM
10/100Mb Ethernet interface
3 x USB 2.0, RS-232, HDMI, 1 x Scart -
• 400 MHz MIPS - Broadcom CPU
• Linux operating system
• Touch Panel
• Media Player
• Support for downloadable plug-ins
• 2x Smart Card Readers
• 2x Common Interface
• MPEG2 / H.264 Hardware decoding
• 1x DVB-S2 tuner
• 11-digit VFD segment
• 512MB of NAND Flash
• 512MB DDR SDRAM
• 10/100 MB Ethernet interface
• 3x USB 2.0
• RS-232
• HDMI
• 1x scart
• S / PDIF for digital bit stream out (optical)
• EPG support
• Auto & Manual Search Service
• Multiple LNB control (DiSEqC)
• Support skin change -
Features: -
Crystal clear HD Picture quality
400Mhz Broadcom MIPS CPU Powered BCM7413 Dual Core
Plug and play modular tuner
8 Digit segment VFD
7 Day EPG support via 3rd party plugins such as Crossepg
512mb DDR SDRAM
Internal 2.5" SATA HDD Facility
Ethernet port
Support popular 3rd party softcams*Specification: -
• 400 MHz - BCM7413 MIPS Broadcom CPU
• Linux Operating System
* Touchpanel
• Media Player
• Support for downloadable plug-ins
• 1x Smartcard reader
• 1x Common Interface
• MPEG2 / H.264 Hardware Decoding
• 1x DVB-S2 Tuner
• 8-digit segment VFD
• 512MB NAND Flash
• 512MB DDR SDRAM
• 10/100 MB Ethernet interface
• 3x USB 2.0
• RS-232
• HDMI
• 1x Scart
• S/PDIF for digital bit stream output (optical)
• EPG support
• Manual & automatic service search
• Multiple LNB control (DiSEqC)
• Support for skin exchangeLooks like the next best thing to compete with vu+
-
ah spot on mate.... wee scary moment there whew
-
hey guys
Ive accidentally deleted my duo folder in the duofullbackup folder
is there anyway to recover this
cheers
-
ahhh right cool i will have a look at that right now
-
dont mean to be a d*ck but the ipk with sub files still gives the green screen.
I had to reflash box lol so i gave that a try but still got the green screen so did the other way of manually ftp'ing the files.
-
i'll give that a try once i get the remote back off the misus lol
cheers
-
I am trying to use TS dreambox player but it tells me I need to update web interface to 1.5 or higher....
so Ive tried to install web interface 1.7.1 from ts pannel but it doesnt install
any help on this?
Vu+ duo on latest blackhole image
cheers
-
hold in power button on remote
-
EDIT
Those of us on blackhole getting green screen heres what to do
Uninstall using ts pannel
hold power button then click hard reset
install 1channel ipk version using dcc or telnet
hold power button then click hard reset
then
using ten below's post above....put those files where stated and again power button and hard reset
I have just tried this and its worked a treat
-
hey guys
hope you can help me with this one
I have vu+ duo running latest blackhole image
I have tried all of the latest version of 1 channel - pli based, non pli based and ipk versions (All nousb)
with the non pli its crashes the vu+ everytime without fail
non pli just picks up an error (obv bhole aint pli based)
ipk crashes like non pli version
Anybody else experiencing this?
cheers