I must admit I think this is a fault with either the box or image but in the menu under setup if i remember right "OSD" you can shift the screen here
Posts by s1m0nw
-
-
mate... read that guide master g is giving you very slowly, take your time and you'll find ALL the questions your asking the answers are in the guide
how to load image
how install ccam
how and where to put config.cfg file
AND how to activate cccamso there should be no need for the above questions
-
bloody hell gigablue are spitting them out now arent they!!!! mmmm vu+ solo or gigablue for bedroom decisions decisions.....
-
hey guys,
I was just thinking there.... is it possible to stream from vu+ to xbox360?
cheers
-
have you read the other thread on this forum... someone else had what sounds like similar problem
-
hey guys,
Asking the above question giving the similarities between dreambox and vu+ in terms for kernals and everything else lol.
cheers
-
any vu+ or gigablue hd 800 se
-
musogeek - seeing as youve just flashed new image - does it tally up well with guide I made?
-
nup not that kind of info button the info button in the way that it brings up menu that tells ya what movie your watching is about.
-
hey guys,
Been looking about trying to see if this can be done.
My setup is vu+ duo with blackhole 1.7.3 and am trying to set the epg button to bring up multi epg as appose to what the program thats is about.
They shoulda put an info button on the vu+ remotes lol
cheers
-
I chose team red based on being told of it stability as the box isnt going to be with me so needed a stable image.
I would advise on getting comfortable with team red image then start changing images otherwise you may get stuck.
-
nice one master g.. like i say quickly done never went over it lol
-
nice one master g.. like i say quickly done never went over it lol
-
mmmm.. now am stumped
-
heres a very basic guide for the above box
I have done this quickly and off memory so any mistakes please feel free to correct and re-upload
Get Team Red image
( Team RED E2 Image 17.02.2012 HD800 SE )Open the rar file you have just downloaded - You will see 2 other rar files named - PreFlash and Finish.
First double click to Preflash and extract the 2 files straight to a clean USB pen then with the gigablue switched off connect usb pen to box and power on the box and wait until its flashing has finished this one usually take a few seconds.
Switch box off and removed usb pen connect to computer and delete preflash files off the pen and unrar the 3 files inside the FINISH folder to USB pen and same as above with the gigablue switched off connect usb pen to box and power on the box and wait until its flashing has finished only this time it'll take a few minutes it will reboot itself.
--------------------------------------------------------------------------------
Run through the setup usual bah bah this bit you can do and setup the internet connection.
Download Vu+ control center ( VuCC VU+ Control Centre Version )
Double click on VUCC.exe (leave this opened we'll get back to it)
Press Menu, Setup, Network and then adaptor settings you should be able to see the box's IP address Enter this where it says IP address on VUCC program
IP Address: 192.168.*.*
User: root
pass: leave blankThen hit connect.
again leave this and we'll install CCCAM onto box....
get this file Extra URL Uploader
Enter your boxs IP Adress and click OK once this is done a box will appear telling to its done, once done close it.
-----------------------------------------------------------
Search for DreamboxUK Frontend and download it this is your ch bouquets - its a smart program that sets channels the way you want it and downloads them to box. Again using ip address and user and pass.
-----------------------------------------------------------
Next up.... Entering you c line if you have one
Goto VUCC
hit FTP
this will bring up files on your box on right hand side.Navigate to /Var/ETC you will see a file called CCCAM.cfg move this to desktop and open it, Delete anything thats in and enter your C:line and save and put it back into /Var/Etc.
Now goto your box, by this stage you be able to see BBC1.
next....
Double press RED button this should bring up the downloads menu and you should see extra.url or something like it goto it and install CCCam 2.2.1.
Press exit to take you back to prevous screen and set softcam to cccam 2.2.1 and hit OK. -
heres a very basic guide for the above box
I have done this quickly and off memory so any mistakes please feel free to correct and re-upload
Get Team Red image
( Team RED E2 Image 17.02.2012 HD800 SE )Open the rar file you have just downloaded - You will see 2 other rar files named - PreFlash and Finish.
First double click to Preflash and extract the 2 files straight to a clean USB pen then with the gigablue switched off connect usb pen to box and power on the box and wait until its flashing has finished this one usually take a few seconds.
Switch box off and removed usb pen connect to computer and delete preflash files off the pen and unrar the 3 files inside the FINISH folder to USB pen and same as above with the gigablue switched off connect usb pen to box and power on the box and wait until its flashing has finished only this time it'll take a few minutes it will reboot itself.
--------------------------------------------------------------------------------
Run through the setup usual bah bah this bit you can do and setup the internet connection.
Download Vu+ control center ( VuCC VU+ Control Centre Version )
Double click on VUCC.exe (leave this opened we'll get back to it)
Press Menu, Setup, Network and then adaptor settings you should be able to see the box's IP address Enter this where it says IP address on VUCC program
IP Address: 192.168.*.*
User: root
pass: leave blankThen hit connect.
again leave this and we'll install CCCAM onto box....
get this file Extra URL Uploader
Enter your boxs IP Adress and click OK once this is done a box will appear telling to its done, once done close it.
-----------------------------------------------------------
Search for DreamboxUK Frontend and download it this is your ch bouquets - its a smart program that sets channels the way you want it and downloads them to box. Again using ip address and user and pass.
-----------------------------------------------------------
Next up.... Entering you c line if you have one
Goto VUCC
hit FTP
this will bring up files on your box on right hand side.Navigate to /Var/ETC you will see a file called CCCAM.cfg move this to desktop and open it, Delete anything thats in and enter your C:line and save and put it back into /Var/Etc.
Now goto your box, by this stage you be able to see BBC1.
next....
Double press RED button this should bring up the downloads menu and you should see extra.url or something like it goto it and install CCCam 2.2.1.
Press exit to take you back to prevous screen and set softcam to cccam 2.2.1 and hit OK. -
press ok after you change it
-
your softcam should be set to cccam 2.2.1
-
give it a kick lol. Like caz says... Chopping and changing images upgrades the lot all work perfectly fine,
you seem to have a very strange fault!
What did you do the last time you managed to solved it?
-
when you switching it off at the back of box... are switching it off and then back on right away or giving it about a minute and then switching it back on?
I found that if I switch box off and on too quickly it gets stuck on starting....
Thats the only bother I had with it being stuck on starting....
