Posts by Need2learn

I have heard that wicardd-armv7a-eabihf version 1.19 beelive will work... anyone have try it and got it to work?

Heard it WORKS using wizardd-armv7 on AFN... anyone can confirm? anyone have a wizardd.config for it?

Quote from georgeflu

have you updated your image to a latest one? (to include the drivers...)

did you disabled stream relay in oscam config from oscam web interface (it should be ok in the configs of message 18,but check it once more) and also oscam.dvbapi to 2.2 ...?

Hey george flu could you share with us your setup...

Quote from zayden

What image are you using ? Did you use the configs that were posted in #18 ?

Yes I used the OSCAM files from #18 and I am using ATV Open 6.1. the one with the latest drivers..it is something going on in my configure

39075b9239df.pngb04a60d8f72c.png

I am in the states.... western satellite but it is doing on all powerVu channels... I checked it is the right key, it just something I have wrong that is causing the pictures to freeze.

Quote from zayden

What satellite/channel is this ? Do you have stream_relay=0 or stream_relay=1 ?

I see Ecm failed: Key not found message so what sat/channel are you attempting to watch and is stream_relay enabled or disabled ?

that would be 0 and disabled for stream_relay

Quote from georgeflu

Quote from georgeflu

Quote from zayden

This is without stream relay ?

Post a pic of the live log from the Oscam webif ? Are you using the configs posted in post #18 ?

What satellite and channel are you testing this on ?

as you just refered it,could you upload a log? what is the error,and what configs are you using? (because we had a simillar problem in vu two days before...)

also,give a try these configs, oscam webif port 16002, no afn reader,no softcam.key inside...

Display More

Quote from georgeflu

Quote from georgeflu

Quote from zayden

This is without stream relay ?

Post a pic of the live log from the Oscam webif ? Are you using the configs posted in post #18 ?

What satellite and channel are you testing this on ?

as you just refered it,could you upload a log? what is the error,and what configs are you using? (because we had a simillar problem in vu two days before...)

also,give a try these configs, oscam webif port 16002, no afn reader,no softcam.key inside...

Display More

Ok here is my log:

• 2018/01/14 22:04:32 00000000 s >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r11392 (arm-newnigma2-linux-gnueabihf)
  
  2018/01/14 22:04:32 00000000 s (main) System name = Linux
  
  2018/01/14 22:04:32 00000000 s (main) Host name = sf4008
  
  2018/01/14 22:04:32 00000000 s (main) Release = 4.1.37
  
  2018/01/14 22:04:32 00000000 s (main) Version = #1 SMP Thu Jan 11 09:29:52 CET 2018
  
  2018/01/14 22:04:32 00000000 s (main) Machine = armv7l
  
  2018/01/14 22:04:32 00000000 s (main) Stb model = dm800se
  
  2018/01/14 22:04:32 00000000 s (main) Stb vumodel = vuultimo
  
  2018/01/14 22:04:32 00000000 s (main) Stb boxtype = sf4008
  
  2018/01/14 22:04:32 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 1696
  
  2018/01/14 22:04:32 00000000 s (emu) OSCam-Emu version 754
  
  2018/01/14 22:04:32 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
  
  2018/01/14 22:04:32 00000000 s (main) signal handling initialized
  
  2018/01/14 22:04:32 00000000 s (config) 3 service-id's loaded in 0 ms
  
  2018/01/14 22:04:32 00000000 s (net) newcamd: initialized (fd=4, port=10001, prio=1 [ SO_PRIORITY IP_TOS ])
  
  2018/01/14 22:04:32 00000000 s (net) -> CAID: 0000 PROVID: 000000
  
  2018/01/14 22:04:32 00000000 s (net) cccam: initialized (fd=5, port=12000, prio=1 [ SO_PRIORITY IP_TOS ])
  
  2018/01/14 22:04:32 00000000 s (reader) emulator [emu] creating thread for device emulator
  
  2018/01/14 22:04:32 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
  
  2018/01/14 22:04:32 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
  
  2018/01/14 22:04:32 00000000 s (anticasc) anti cascading disabled
  
  2018/01/14 22:04:32 05624A1A c (client) plain dvbapi-client granted (linuxsatsupport, au=auto (1 reader))
  
  2018/01/14 22:04:32 05624A1A c (dvbapi) dvbapi channelcache loaded from /usr/keys/oscam.ccache
  
  2018/01/14 22:04:32 05624A1A c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)
  
  2018/01/14 22:04:32 606C5924 r (emu) Reading key file: /usr/keys/SoftCam.Key
  
  2018/01/14 22:04:32 04C66679 h (webif) webif: decompressed 177772 bytes back into 437640 bytes
  
  2018/01/14 22:04:32 04C66679 h (webif) HTTP Server running. ip=0.0.0.0 port=8888
  
  2018/01/14 22:04:32 00000000 (emu) INFO: FFDecsa parallel mode = 32
  
  2018/01/14 22:04:32 606C5924 r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
  
  2018/01/14 22:04:33 05624A1A c (dvbapi) Demuxer 0 ecmpid 0 CAID: 5604 ECM_PID: 0BC1 PROVID: 000000
  
  2018/01/14 22:04:33 05624A1A c (dvbapi) Demuxer 0 ecmpid 1 CAID: 0E00 ECM_PID: 1779 PROVID: 000000
  
  2018/01/14 22:04:33 05624A1A c (dvbapi) Demuxer 0 found 2 ECMpids and 3 STREAMpids in caPMT
  
  2018/01/14 22:04:33 05624A1A c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
  
  2018/01/14 22:04:33 606C5924 r (reader) emulator [emu] card detected
  
  2018/01/14 22:04:33 05624A1A c (dvbapi) Demuxer 0 found 2 ECMpids and 3 STREAMpids in PMT
  
  2018/01/14 22:04:34 606C5924 r (reader) emulator [emu] found card system emu
  
  2018/01/14 22:04:34 606C5924 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
  
  2018/01/14 22:04:34 606C5924 r (emu) Reading key file: /usr/keys/SoftCam.Key
  
  2018/01/14 22:04:34 05624A1A c (dvbapi) Demuxer 0 restarting decodingrequests after 1382 ms with 1 enabled and 1 disabled ecmpids!
  
  2018/01/14 22:04:34 05624A1A c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 0E00 PROVID 000000 ECMPID 1779 ANY CHID PMTPID 13F3 VPID 0681
  
  2018/01/14 22:04:35 05624A1A c (ecm) linuxsatsupport (0E00@000000/0000/006B/91:58B6680EEEB9E590022D5D3D855F8F8A): found (1 ms) by emulator -
  
  2018/01/14 22:04:35 05624A1A c (ecm) linuxsatsupport (0E00@000000/0000/006B/91:F1F97AD1CF77DB12D95340FC12248281): found (23 ms) by emulator -
  
  2018/01/14 22:04:40 05624A1A c (ecm) linuxsatsupport (0E00@000000/0000/006B/91:CC60C8E58C42C473DA12CB14233A8C35): found (1 ms) by emulator -
  
  2018/01/14 22:04:50 05624A1A c (ecm) linuxsatsupport (0E00@000000/0000/006B/91:A9AD8282270F6202AE31710A1C62CD8B): found (1 ms) by emulator -
  
  2018/01/14 22:05:00 05624A1A c (ecm) linuxsatsupport (0E00@000000/0000/006B/91:2FE1114ABBA277931E68F3F2E39CD1C7): found (2 ms) by emulator -
  
  2018/01/14 22:05:00 05624A1A c (dvbapi) Demuxer 0 stop descrambling program number 006B (AFN)
  
  2018/01/14 22:05:00 05624A1A c (dvbapi) Demuxer 0 found 0 ECMpids and 3 STREAMpids in caPMT
  
  2018/01/14 22:05:00 05624A1A c (dvbapi) Demuxer 0 found 0 ECMpids and 3 STREAMpids in PMT
  
  2018/01/14 22:05:03 05624A1A c (dvbapi) Demuxer 0 stop descrambling program number 0192 (FFFE@FFFFFE:0192 unknown)
  
  2018/01/14 22:05:03 05624A1A c (dvbapi) Demuxer 0 ecmpid 0 CAID: 5604 ECM_PID: 0BC1 PROVID: 000000
  
  2018/01/14 22:05:03 05624A1A c (dvbapi) Demuxer 0 ecmpid 1 CAID: 0E00 ECM_PID: 1779 PROVID: 000000
  
  2018/01/14 22:05:03 05624A1A c (dvbapi) Demuxer 0 found 2 ECMpids and 3 STREAMpids in caPMT
  
  2018/01/14 22:05:03 05624A1A c (dvbapi) Demuxer 0 found channel in cache and matching prio -> start descrambling ecmpid 1
  
  2018/01/14 22:05:03 05624A1A c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 0E00 PROVID 000000 ECMPID 1779 ANY CHID PMTPID 13F3 VPID 0681
  
  2018/01/14 22:05:03 05624A1A c (dvbapi) Demuxer 0 found 2 ECMpids and 3 STREAMpids in PMT

Ok I am working but I have a problem with the video locking up... I am getting audio and picture now and then and then picture freezing what do I need to do to get the picture from freezing?

I have a question I am using open 6.1 and I am able to get AFN to work but that is all, I can't get any other channels to work?

Hello looking for North America Softkeys for Octagon 4k withOUT streaming.

Yes you can you do not have to use the stream relay... go to post # 18 and follow.

Hello I upgraded using octagon_Sx88_eu_v10434_051217 but I am still not seeing: Webif (Web Interface)??

I am still confused so could someone explain more? which file do I use for Open 6.1 to get powerVu to work without streaming?

Could someone explain and little more on what you have to do to get this to work... Thanks

Update ok that worked thanks... The only thing I am still not clear on is, there are 3 places the soft keys and placed... /etc/tuxbox/config, the second place is /usr/key and also /etc/tuxbox/config/oscam.keys when I update my keys which one is active? what do I used for "BISS"?

Thanks

Hello can someone explain to me how to backup the plugins and how to restore JUST THE PLUGINS from one version OPENATV 6.1 TO A NEWER VERSION OF OPEN ATV 6.1

Sure you can using WEBIF....

Hello master G I got PowerVu up and running fine on my Octagon 4008, the problem I am having is when I turn to a non PowerVu channel and go back to a PowerVu channel is goes black? How do I fix that problem?

I am looking for a better tuner for my Vu 4k that came with it. A dual dvb-2 tuner

Can some explain to me whats the difference between Open black hole and Black Hole?