What needs to be added to the dvbapi file?
Posts by Davidec
-
-
Do I need to have a physical card or a special reader for caid 098D to run Sky De in icam?
-
Everything works fine on the DM920 with DreamOs. The key was the correct list.
-
It is also possible that the LNB no longer works properly,
ever tried with signal finder?
The signal is correct. If I enter the regular sky uk list, there is normally a signal and there is information about decoding from the card and in iptv circus.
-
I know that there is no problem with the operation of Sky Max. I can't determine why 3 of the 30 channels on the list work for me. I have info on the others connecting.....Cannot find media type. And after some time tuning no data on the transponder! End of PAT reading time and that's it...
Nobody here has run it on DM920 in DreamOS?
-
The log shows Sky Nature working then Sky Max not working and Sky Comedy working. It looks like it's asking twice... What am I doing wrong?
-
Menu
Settings
SystemI was looking. There are no options there.
Where are these options in dreamos ? :
You don`t need to make these changes on DreamOS images, its only for OE-Alliance based images (openatv, openpli etc).
If it is not needed, what am I doing wrong that Sky Comedy and Movies24 work for me and Sky Max does not?
-
I can't find it. Anyone run it on DM920 with dreamos?
-
Trying to launch sky uk in icam on DM920. Where are these options in dreamos ? :
Include ECM in HTTP streams - NODescramble HTTP streams - YES
Descramble received HTTP streams - NO
Load unlinked userbouquets - YES
I can't find these settings.
Looks like DM wants to decode 2x.
I get ERROR: stream client 0 got 502 response from stream source. -
I have under Blue - Softcam - download sofcams - file "enigma2-plugin-softcams-mgcamd" version 1.38. The latest is 1.46? Where to download it? Can it be installed via tmp?
-
Is there a standard and emu version here too? does mgcamd already contain emu? The files that are needed are cccamd.list, mg_cfg, newcamd.list and SoftCam.Key ? Can someone post the latest? or point to a proven location?
-
I have VU+ DUO 4K SE on OpenATV 7.2. I would like to run Mgcamd on it. What files will be needed? I've only used oscam so far. Please help.
-
Earlier I had other speeds entered. And I had to move one jumper in the reader itself.
These two things worked :)
I am glad that I succeeded because I thought that nothing would happen.
-
It worked on such entries:
[reader]
label = nc_plus
protocol = mouse
device = /dev/ttyUSB0
enable = 1
mhz = 600
cardmhz = 368
detect = cd
group = 1
blockemm-unknown = 1
blockemm-u = 1
blockemm-g = 1thanks for help gentlemens
-
I tried all of these entries and none of this.
I don't know what else to do.
-
device = dev/ttyUSB0 is no working
I think it should be something of it:
Bus 008 Device 002: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
iProduct 2 FT232R USB UART
iSerial 3 A105BUOK
I tried device = 008:002 and device = 0403:6001 - but no results.
I have OSCam r11572 in my VU+ Ultimo 4K.
-
I'm trying to fire the NC + card in an external USB reader.
oscam.server
[reader]
label = nc_plus
protocol = mouse
device = ????????
caid = 0100
detect = cd
mhz = 450
cardmhz = 2700
group = 1
emmcache = 1,2,3,0
blockemm-unknown = 1
blockemm-g = 1
I don't know what to enter in the "device" field ?
USB Devices
Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
iProduct 2 BRCM OHCI controller
iSerial 1 f0480600.ohci_v2
Bus 005 Device 004: ID 0a5c:2045 Broadcom Corp. Bluetooth Controller
iProduct 2 BCM2045A0
iSerial 3 BC14EFBBD4DB
Bus 005 Device 005: ID 0a5c:0bdc Broadcom Corp. iProduct 2 BCMUSB 802.11 Wireless Adapter
iSerial 3 54490
Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
iProduct 2 BRCM OHCI controller
iSerial 1 f0480400.ohci_v2
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
iProduct 2 BRCM OHCI controller
iSerial 1 f0470400.ohci_v2
Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
iProduct 2 EHCI Host Controller
iSerial 1 f0480500.ehci_v2
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
iProduct 2 EHCI Host Controller
iSerial 1 f0470500.ehci_v2
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
iProduct 2 xHCI Host Controller
iSerial 1 f0471000.xhci_v2
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
iProduct 2 xHCI Host Controller
iSerial 1 f0471000.xhci_v2
Bus 008 Device 002: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
iProduct 2 FT232R USB UART
iSerial 3 A105BUOK
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
iProduct 2 BRCM OHCI controller
iSerial 1 f0470600.ohci_v2
Bus 005 Device 002: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB
iProduct 1 USB 2.0 Hub
iSerial 0 Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
iProduct 2 EHCI Host Controller
iSerial 1 f0480300.ehci_v2
Bus 003 Device 002: ID 0951:1665 Kingston Technology iProduct 2 DataTraveler 2.0
iSerial 3 001A4D5E4020BF61593B6E0F
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
iProduct 2 EHCI Host Controller