Posts by beli1910

The scalar ring is the original from C Band. The Lnb is current even without modifications. Yes, there is quite a bit of improvement in the signal from the satellites on the Clark's path. So far, I have not noticed that I have a worse signal anywhere due to the addition of the ring. I will need more time for a more precise analysis, but I did the test in order to show you that it is possible to add some signal in this combination of lnb and with this antenna. There is no rule that with the same combination on a different antenna you will have improved results. This is just an indication of how much I managed to get a signal by adding a ring. Sometimes the improvements are visible from 0.5db to 1.5db, which is a success for me.

As I promised a while ago, I made a video with the addition of a scalar ring on my gibertin 150-ku band. I am satisfied with the results and mainly I have an improvement of the signal on the Clark path.

As stated in the title, I am selling a new, unused original polarmount for Laminas 1.8m antenna. With a minor modification, it can also be used on other larger antennas. The weight of the polarmount is approx. 19 kg. The price is 250 euros. The new one in the store has a price of 495 euros - in the attached link .

Montaggio polare ASP 1800 Laminas 180 cm - nuova versione - 495,00EUR : STARSAT, La TV dal Satellite

Another option, which is very likely, is that the antenna itself is not in the center of the motor arm, and the problem you mention is finally happening to you. Option 3 is the following - you did not properly install the system in the pure south according to your geographical location.

One of the possible causes of your problem. The screws in the motor have loosened and the bearing deviates as shown in the video.

Problem with Luft-Diqec motor

scan again max tv transponder.

I'm closing the ad. The motor is sold.

As I said - the engine was not used. It was intended for my Laminas 1.8m project, but I will make the project by making a new prototype diqec engine with a balanced extended arm as I did with the Gibertini 150 project, which you can see on the link.

Thread

Gibertini 150 -rotation with Diqec motor Amiko-@Beli1910

But here I will post the conversion of the construction of the Diqec motor for rotating large antennas. The antenna is on a balanced arm and the rotor load is zero.
Here is link where you can see sistem.
youtube.com/shorts/eGTULKmO9pY?feature=share
https://m.youtube.com/channel/UCzMUUFGKSud9z9xs3YAkVEA

beli1910

Jul 30th 2022

As it says in the title, for sale is a never used Superjack SMR 1124 EL. The motor is in excellent condition - new. Those of you who are familiar with equipment know what type of motor I am talking about and that it is practically impossible to get. The price is 350 euros, or for sale to the best provider. Greetings to all.

The picture is symbolic. I will send pictures of the engine to those interested.

If you want a stable signal on the 16E satellite, I recommend a minimum 90 antenna. I personally would give 110 up and rest.

I am personally from this geographical area, and practice is at least 90 here.

the construction of the prototypes was done by my friend, who, unfortunately, does not have much free time. The projects are made out of a challenge and love for the hobby. Two different unique prototypes were made.

To get it cheaper. If you're interested, write a pm. I'll give you the contact - I don't know about the customs for England

sorry. You meant a measuring instrument. Yes drhd 1000combo. Excellent measuring instrument considering the price and its capabilities. There is a drhd 500. The only problem is getting it. I hope to get it soon so that I have both.

both antennas are driven by the amiko dm 3800 diqec motor.a complete construction for the Diqec engine with an extended balanced arm is made from scratch.

Sorry my english not the best.use translate.

I have all this equipment at home. Stick motors 36,24,10 - superjack positioners.etc...I also have smr 1224 el new - for the Laminas 1.8m project. The challenge was to make a system for heavy antennas to be rotated by a diqec motor. it succeeded. After the tests so far, the diqec motor spins the 45kg fte 1.8m antenna effortlessly. We are satisfied with the results.

New dish and new pictures.My old dish now use my friend.

Reworking the rotor structure and the balanced arm enables the rotation of heavier antennas - This was one challenge that took a lot of time and testing. Another prototype is also made and rotates a 1.8m fte antenna from my friend - you have a video on you tube.

Sorry upload with mobitel and have some problems.

Regards

Screenshot_20210926-201642_Viber.jpg

But here I will post the conversion of the construction of the Diqec motor for rotating large antennas. The antenna is on a balanced arm and the rotor load is zero.

Here is link where you can see sistem.

Beli1910

m.youtube.com