Posts by Yhoni

Quote from Labyrinth00

can anyone help me with these messages from the log? i know to search and read the readmes and stuff but i been reading for a week now and cant find anything that helps i need help to better understand and find a solution

2013-12-09 00:25:08 - NewcamdCws[]: Warning (timeout) - ECM timeout for [profile:7a]: 1
2013-12-09 00:23:54 - csp: Startup - Proxy node started.

2013-12-09 00:25:08 - WARNING: NewcamdCws[] - No request found for reply: 7 (DCW (0x80), Unknown (7a) *:7a) pending are: []
2013-12-09 00:25:08 - WARNING: NewcamdCws[] - Timeout waiting for ecm reply, discarding request and returning empty (1 failures) - [7 7a 0001 0000] [00 01 01] ECM (0x80) 1883C3CE [4988 ms] [valid] 138127 (NewcamdSession[1:profile])

Display More

Hi mate , i have the same problem:

Quote

CSP 0.9.0r219 -

1014-05-14 23:09:10 - WARNING: NewcamdCws[1.4-8:Local] - No request found for reply: 397 (DCW (0x81), Unknown (0) *:0) pending are: []
2014-05-14 23:09:10 - WARNING: NewcamdCws[10.40-8:Local] - Timeout waiting for ecm reply, discarding request and returning empty (1 failures) - [0 76cc 0031 1810] ECM (0x81) 18FF8B22 [3331 ms] [valid] Client
(NewcamdSession[50:Local])

My max-cw-wait=3950ms.

Why ecm timeout is 3331 ms ?

Anybody can help me?

Thank you

Quote from sync

Stop csp, make the changes to the proxy.xml via ftp and restart csp

Hello, I can see the configuration "<ip-filter> </ ip-filter>" but I can not see where to set the delay time. Can you tell me as add?.

Thank you.

Hello, I try to change the parameter "IP filter Set" and the parameter "Set test-delay" plugin for Cardserverproxy com.bowman.cardserv.LoggingPlugin but the changes I make from the web are not made in the proxy.html file? as it could get?.

Thanks

Quote from sat-fan

Hi all,

i have downloaden CSP version 0.9.0r224 and installed it on my VMmachine for the test.
But what is now the latest version becourse there is also a' 0.9.1 Rxxx ? and normaly I would say that is newer ?.

Ps are the plugin's for CSP that i can add in csp ?

Tnx
SF

Display More

Hi mate, the last version is 0.9.0 r224 in this moment.

hello friends, I have a problem I get repeated errors QFZC, QFZ, QCZI, QCZ betwen two cardserverproxy with the same packages contract.

One of them gives no errors but the other if with the same configuration.

The log:

Quote

120607 15:29:57.433 FINEST -> NewcamdSession[3:Nagra3] <- Incoming message length: 160 bytes
120607 15:29:57.433 FINER -> NewcamdSession[3:Nagra3] <- Received message: [0 77c3] ECM (0x80) >> 00 00 77 C3 18 10 00 00 00 00 >> 0011 (0x30) >> F02D828F
120607 15:29:57.434 FINER -> Allowed connectors '[reader-2, reader-3, reader-1, otherreader-3, CSPremote-Proxy, otherreader-1, otherreader-2]' for: F02D828F
120607 15:29:57.434 INFO -> ECM F02D828F (0x86 0031 1810) - veloz (NewcamdSession[3:Nagra3])[77c3/Unknown (77c3)] -> NewcamdCws[otherreader-3:Nagra3]
120607 15:29:57.434 FINER -> NewcamdCws[otherreader-3:Nagra3] <- Sending message F02D828F: [14854 77c3] ECM (0x80) >> 3A 06 77 C3 18 10 00 00 00 00 >> 0011 (0x30) >> F02D828F
120607 15:29:57.434 FINER -> Allowed connectors '[reader-2, reader-3, reader-1, otherreader-3, CSPremote-Proxy, otherreader-1, otherreader-2]' for: F02D828F
120607 15:29:57.434 FINER -> CspCws[CSPremote-Proxy:*] <- Blocked attempt to forward F02D828F back to origin: c4e357ae
120607 15:29:57.435 FINE -> Blacklisting/filtering removed allowed connector(s) [CSPremote-Proxy] for: F02D828F [77c3 1810 - FF FF FF]
120607 15:29:57.712 FINEST -> ClusteredCache <- Waited for F02D828F in cache: 277 ms
120607 15:29:57.712 INFO -> ECM F02D828F (0x86 0031 1810) - CSPremote-CSP (CspSession[1:*])[77c3/Unknown (77c3)] -> NewcamdCws[reader-1:Nagra3]
120607 15:29:57.712 FINER -> NewcamdCws[reader-1:Nagra3] <- Sending message F02D828F: [15094 77c3] ECM (0x80) >> 3A F6 77 C3 18 10 00 00 00 00 >> 0000 (0x00) >> F02D828F
120607 15:29:57.713 INFO -> CW 5634671A (0x10) - [597:FZ] -> local (NewcamdSession[2:Nagra3])

120607 15:29:57.714 FINEST -> NewcamdSession[2:Nagra3] <- Incoming message length: 160 bytes
120607 15:29:57.714 FINER -> NewcamdSession[2:Nagra3] <- Received message: [0 77c3] ECM (0x80) >> 00 00 77 C3 18 10 00 00 00 00 >> 0011 (0x30) >> F02D828F
120607 15:29:57.777 FINER -> Allowed connectors '[reader-2, reader-3, reader-1, otherreader-3, CSPremote-Proxy, otherreader-1, otherreader-2]' for: F02D828F
120607 15:29:57.777 INFO -> ECM F02D828F (0x86 0031 1810) - local (NewcamdSession[2:Nagra3])[77c3/Unknown (77c3)] -> CspCws[CSPremote-Proxy:*]
120607 15:29:57.991 FINEST -> NewcamdCws[otherreader-3:Nagra3] <- Incoming message length: 40 bytes
120607 15:29:57.995 FINER -> NewcamdSession[2:Nagra3] <- Sending message 6263259E: [0 77c3] DCW (0x80) >> 00 00 77 C3 00 00 00 00 00 00 >> 0000 (0x00) >> 6263259E
120607 15:29:57.996 FINEST -> NewcamdSession[2:Nagra3] <- Assembled message (29 bytes) -> 00 00 77 C3 00 00 00 00 00 00 80 00 10 60 5A 3A F4 F7 1D 53 67 50 85 EB C0 6B F3 A6 04
120607 15:29:57.996 INFO -> CW 6263259E (0x10) - [282:FZ] -> local (NewcamdSession[2:Nagra3])
120607 15:29:58.027 INFO -> CW 6263259E (0x10) - [593:QFZC] -> CSPremote-CSP (CspSession[1:*])

Display More

Anybody can help me ?

Thanks.

Quote from zebbros

GUYs it is really UP to YOu , You can use only one connector but as I said earlier 3 connectors are recommended for Load Balancing see the example below with 3 cons and 1 con. check the Percentage on connectors.

3 X connector LOADS

NewcamdCws: Card 2:1:1 Status: connected Profile: ***-***UK Services: 360 Metric: 0 4% (5)
NewcamdCws: Card 2:1:2 Status: connected Profile: ***-***UK Services: 361 Metric: 0 4% (5)
NewcamdCws: Card 2:1:3 Status: connected Profile: ***-***UK Services: 385 0% (0)
NewcamdCws: Card 2:2:1 Status: connected Profile: ***-***UK Services: 368 Metric: 0 5% (6)
NewcamdCws: Card 2:2:2 Status: connected Profile: ***-***UK Services: 371 Metric: 0 5% (6)
NewcamdCws: Card 2:2:3 Status: connected Profile: ***-***UK Services: 384 0% (0)

1 X connector LOADS

NewcamdCws: Card 2:1:1 Status: connected Profile: ***-***UK Services: 360 Metric: 0 8% (10)
NewcamdCws: Card 2:2:1 Status: connected Profile: ***-***UK Services: 368 Metric: 0 10% (12)

Display More

It is right, i am testing and the result is very good with 3 connectors for each local card.

Do you have the times for Spanish D+ 1810 nagra3 provider for two server sbox+csp+cccam?
max-cw-wait?
max-cache-wait ?
congestion-limit ?
cannot-decode-wait ?
etc ?

I was testing and cccam client frezze after 3940ms without DWs .

Thanks.

Quote from cybermega

Intresting information Zebbros, though i cannot get my head around why 3 connections to the same local card will make any more difference than only having 1 connection? am i missing something completley obvious here!!:confuse:

I ask the same question :sad:

Hi mate, why do you have three connections for each local card ?

Quote

<!-- ############### Local Card 1 ############### -->

<newcamd-connector name="CON : 1" profile="0963-***UK" provider-idents="00 00 00" metric="0" enabled="true">
<host>ip address of your card reader server</host>
<port>card reader server port</port>
<user>user name</user>
<password>password</password>
<des-key>01 02 03 04 05 06 07 08 09 10 11 12 13 14</des-key>
<asynchronous>true</asynchronous>
</newcamd-connector>

<newcamd-connector name="CON : 2" profile="0963-***UK" provider-idents="00 00 00" metric="0" enabled="true">
<host>ip address of your card reader server</host>
<port>card reader server port</port>
<user>user name</user>
<password>password</password>
<des-key>01 02 03 04 05 06 07 08 09 10 11 12 13 14</des-key>
<asynchronous>true</asynchronous>
</newcamd-connector>

<newcamd-connector name="CON : 3" profile="0963-***UK" provider-idents="00 00 00" metric="1" enabled="true">
<host>ip address of your card reader server</host>
<port>card reader server port</port>
<user>user name</user>
<password>password</password>
<des-key>01 02 03 04 05 06 07 08 09 10 11 12 13 14</des-key>
<asynchronous>true</asynchronous>
</newcamd-connector>

<!-- ############### Local Card 2 ############### -->
... idem ....

Display More

Thanks for your help.