07.03.2022 All satellites that are in FlySat
Posts by FRAP
-
-
24.02.2022 All satellites that are in FlySat
-
this information is what MOHAMED_OS posted
where I installed from the telnet opkg update && opkg install libcurl4
Unix starttime: 1645643426
Starttime: 23.02.2022 22:10:26
Version: oscam-1.20_svn-r11704-798
Compiler: mipsel-vuplus-linux-gnu-ssl-libcurl-libusb-pcsc
Box type: vuduo2 (generic)
PID: 719
TempDir: /tmp/.oscam
GBox tmp_dir: not defined using: /tmp/.oscam
ConfigDir: /etc/tuxbox/config/oscam-emu/
WebifPort: 8181
Web interface support: yes
LiveLog support: yes
jQuery support intern: yes
Touch interface support: no
SSL support: yes
DVB API support: yes
DVB API with AZBOX support: no
DVB API with MCA support: no
DVB API with COOLAPI support: no
DVB API with COOLAPI2 support: no
DVB API with STAPI support: no
DVB API with STAPI5 support: no
DVB API with NEUTRINO support: no
DVB API read-sdt charsets: yes
Irdeto guessing: yes
Anti-cascading support: yes
Debug mode: yes
Monitor: yes
Loadbalancing support: yes
Cache exchange support: yes
Cache exchange AIO support: yes
CW Cycle Check support: yes
LCD support: no
LED support: no
Clockfix with realtime clock: yes
IPv6 support: no
Emulator support: yes
Built-in SoftCam.Key: yes
camd 3.3x: no
camd 3.5 UDP: yes
camd 3.5 TCP: yes
newcamd: yes
CCcam: yes
CCcam share: yes
gbox: yes
radegast: no
scam: yes
serial: no
constant CW: yes
Pandora: no
ghttp: no
Reader support: yes
Nagra: yes
Nagra Merlin: yes
Irdeto: yes
Conax: yes
Cryptoworks: yes
Seca: yes
Viaccess: yes
NDS Videoguard: yes
DRE Crypt: yes
TONGFANG: yes
Bulcrypt: yes
Griffin: yes
DGCrypt: yes
cardreader_phoenix: yes
cardreader_drecas: no
cardreader_internal_azbox: no
cardreader_internal_coolapi: no
cardreader_internal_coolapi2: no
cardreader_internal_sci: yes
cardreader_sc8in1: no
cardreader_mp35: yes
cardreader_smargo: yes
cardreader_pcsc: yes
cardreader_smartreader: yes
cardreader_db2com: no
cardreader_stapi: no
cardreader_stapi5: no
cardreader_stinger: yes
-
Give a telnet command and your oscam will start working
see my journal what i did
root@vuduo2:~# opkg update && opkg install libcurl4
Downloading http://downloads.openpli.org/f…ase/3rd-party/Packages.gz.
Updated source 'openpli-3rd-party'.
Downloading http://downloads.openpli.org/f…arty-mips32el/Packages.gz.
Updated source 'openpli-3rd-party-mips32el'.
Downloading http://downloads.openpli.org/f…-party-vuduo2/Packages.gz.
Updated source 'openpli-3rd-party-vuduo2'.
Downloading http://downloads.openpli.org/f…8-release/all/Packages.gz.
Updated source 'openpli-all'.
Downloading http://downloads.openpli.org/f…ease/mips32el/Packages.gz.
Updated source 'openpli-mips32el'.
Downloading http://downloads.openpli.org/f…elease/picons/Packages.gz.
Updated source 'openpli-picons'.
Downloading http://downloads.openpli.org/f…elease/vuduo2/Packages.gz.
Updated source 'openpli-vuduo2'.
Installing libssh2-1 (1.8.2) on root
Downloading http://downloads.openpli.org/f…1_1.8.2-r0.3_mips32el.ipk.
Installing libcurl4 (7.66.0) on root
Downloading http://downloads.openpli.org/f…_7.66.0-r0.3_mips32el.ipk.
Configuring libssh2-1.
Configuring libcurl4.
root@vuduo2:~# init 6
root@vuduo2:~#
-
Caught Hello! The weather comes from https://www.buienradar.nl/ so I noticed that on this site the value "Feels Like:" has disappeared and instead the value "Gevoelstemperatuur" has appeared
It seems to me that these are completely different concepts in the information provided (I think this is due to the wind) correct me if I'm wrong.
Feels Like: - Gevoelstemperatuur are these values the same in terms of weather?
-
There is a problem with character encoding in the list (Turkish satellites)
This is observed in the xml sheet
<sat name="31.0E T� 5A" flags="1" position="310">
<sat name="42.0E Ku-band T� 3A/4A" flags="1" position="420">
<sat name="50.0E T� 4B" flags="1" position="500">
It has to be!
<sat name="31.0E Türksat 5A" flags="1" position="310">
<sat name="42.0E Ku-band Türksat 3A/4A" flags="1" position="420">
<sat name="50.0E Türksat 4B" flags="1" position="500">
-
Motor - FULLFeed (45.0°W - 76.5°E)
Astra 5B @ 31.5° East
[31.5 E] ===== ASTRA 5B =====
12071 H
DVB-S2/8PSK
MPEG-4 30000 3/4
missing these channels
1.Discovery Showcase Europe HD
2.Eurosport 1 NEE HD
3,Eurosport 2 NEE HD
the satellite has not been scanned
-
15.11.2021 All satellites that are in FlySat
-
07.11.2021 All satellites that are in FlySat
-
extream87 Thank you very much! This command worked successfully and the simulator started!
root@vuduo2:~# opkg update && opkg install libcurl4
Downloading http://downloads.openpli.org/f…ase/3rd-party/Packages.gz.
Updated source 'openpli-3rd-party'.
Downloading http://downloads.openpli.org/f…arty-mips32el/Packages.gz.
Updated source 'openpli-3rd-party-mips32el'.
Downloading http://downloads.openpli.org/f…-party-vuduo2/Packages.gz.
Updated source 'openpli-3rd-party-vuduo2'.
Downloading http://downloads.openpli.org/f…i-develop/all/Packages.gz.
Updated source 'openpli-all'.
Downloading http://downloads.openpli.org/f…elop/mips32el/Packages.gz.
Updated source 'openpli-mips32el'.
Downloading http://downloads.openpli.org/f…elease/picons/Packages.gz.
Updated source 'openpli-picons'.
Downloading http://downloads.openpli.org/f…evelop/vuduo2/Packages.gz.
Updated source 'openpli-vuduo2'.
Installing libssh2-1 (1.8.2) on root
Downloading http://downloads.openpli.org/f…1_1.8.2-r0.4_mips32el.ipk.
Installing libcurl4 (7.66.0) on root
Downloading http://downloads.openpli.org/f…_7.66.0-r0.4_mips32el.ipk.
Configuring libssh2-1.
Configuring libcurl4.
root@vuduo2:~# init 6
root@vuduo2:~#
-
MOHAMED_OS Hello, your binary does not work on my Duo2 and I get this message on my box
* opkg_prepare_url_for_install: Couldn't find anything to satisfy 'libcurl.so.4'.
root@vuduo2:~#
-
it was good in day 1 and after 2 day cccam has stop after 20 second
why?
I have no idea, I don't use this emulator
-
please fix this
cccam is closed code and can only be fixed by its creators (Authors)
ps I guess that the creators of this emulator is no longer interesting. Because updates come out once every two years :)
-
it's not a bad site! But it lacks one useful feature for me in my opinion. What I mean is ..... Why should I download all the frequencies from a satellite for myself if I watch from that satellite of one provider? It's a very expensive restaurant and they bring me all the food dishes at once! :) I have to choose for myself the food I eat.
-
02.09.2021 All satellites that are in FlySat
-
Hi Kiddac on the next update Jedi Maker Xtream could add the PT language?
Hello, please update your translation with translation file JediMakerXtream.pot and you will see that there are 48 new lines and 34 old lines.Your translation has old lines and no new lines.I created a translation template from version jedimakerxtream_6.18.20210829.JediMakerXtream.zip
-
07.06.2021 All satellites that are in FlySat
-
22.05.2021 All satellites that are in FlySat
-
I am not a collector of binary files! :) I installed a binary file from the image tape (bypassing the ipk installation), then if I want to change the oscam version, then I stop the enigma and change the binary file to the new version. Just when I install a file from the tape, my box gets all the necessary libraries (dependencies). Here's something like this.Взаимодействие с другими людьми
-
Why do you need two binaries in the box? This does not need to be done, because it loads the memory of the receiver. Just change the downloaded binary file to the one you have in the box. Save the old file beforehand just in case.
1.download your architecture binary.
2. Change the downloaded file to the name of the file in your box.
3. give the command to init 4 telnet
4. go along the usr / bin path and change binaries with replacement
5. give the command to init 6 telnet
6. that's all.
Взаимодействие с другими людьми