Posts by ChromaEdge

Quote from master G

Try adding your [reader] to the attached configs.

Hey Master G

Thank you...what ive done I installed oscam 10660 and then replaced the 4 files with the ones from the zip as above...
Before adding those 4 files I edited the server file with my line details but still not clearing....I checked under reader and its enabled is there any screen shots I can post that will show issue? please do let me know

and once again I really appreciate the help...once I get this box running I will be writing a indept step by step guide with all the links to the files and how set it all up tutorial so that should help someone save 4 days hehe

Kind Regards

- - - Updated - - -

Currently I am at this stage with nothing clearing

f6ec427f00cb867.jpg 1a70bdf.jpg

- - - Updated - - -

- - - Updated - - -

some more info I keep getting this when I put on a hd channel or paid channel to clear....Free channels are clearing..but not paid

016/02/24 04:40:57 7CC911E6 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 1841 PROVID 000000 ECMPID 1542 ANY CHID PMTPID 0054 VPID 02C5
2016/02/24 04:40:58 7CC911E6 c (ecm) dvbapi (1841@000000/0000/28A7/89:9A1DB6B4F8E9FEBFFD14596125AA9647): not found (9 ms) by xxxxxxxxxx.xxx - BBC ONE HD

another screen shot of the whole thin

ec47273893189c89d0a.jpg

surely we are very close now guys no?

Quote from Honcho

yup you will need to active oscam via this before it opens up in browser as i said above

also stop doing it via ftp until you have it working i think using the graphical interface via webif will be much better for yourselv
like as when you do i have writen where to put your dnys port ect ect so you know , i think yer just making things harder for yourself swapping files :)

but regardles su need to start the cam by doing as i say above via remote if you cant access it on my backups the port will be 8888 normally but you can check via ftp what port it is if needs be but seriously start the cam via remote as above then check webif

Display More

Hi Honcho

I went back to the drawing board installed clean openATV installed 10660 oscam....went into user keys and edited server and started cam in box and I was able to browse to boxip and port and see it showing connected...finally getting somewhere

Now

The only thing is channels are not clearing?? this is maybe something to do with dvbapi? I'm trying to clean VM line

where it shows connected on browser under the server name I got this

newcamd 1850:0516 1850:0516 unknown no data 00:02:00
00:00:05 CONNECTED

Any Advice pls?

Thx

Quote from mach1

CWS lines u r using with mgcamd will work with oscam too convert them line a n line and put it to oscam.server..

Hi Mach1 thanks I have tried and tried but no luck...I install oscam and then theres 4 main files that end up in either user/keys/xxx_emu or etc/tuxbox/config do you just need to edit 1 file the server one or do you need to edit other aswell

also after installing I just cant seem to connect via webpage aka wetekip and port just sits there. I am told I need to enable the came through the box aswell as logging into wetek ip?

as I'm using a clean openATV image that doesn't have any plugins how do I go about installing openwebif on to it as its not available in the plugins?

Kind Regards

do any of these support mgcamd? or are we stuck with oscam...as I just cant get my vm line to work with oscam what so ever been 3 days in a row now 8 hours a day and zilch.....I don't even know why OpenATV lost their minds to stop supporting mcamd or cccam that's if they ever did...

Quote from Honcho

go to laptop and loginto the webif for oscam via your wetek ip :16003 and make sure the reader is enabled ;)
also have you activated it in following via remote control

menu , info pannel , softcam pannel and select emu then green(2) to restart the cam ?
you always need to start the cam via remote n reader via webif for oscam .

if you done this already let me know

I tried with ip and port and it just sits there wont connect or do anything....also I noticed that under etc/tuxbox/ there is no config folder but under user/keys theres config_emu with all the files that are suppose to be in the former...I put the 4 files oscam.conf oscam.user oscam.server and oscam.dvbapi in both those folder to rule out and issues but still nothing clearing. I'm using your OpenATV 5.1 sd card backup

I don't know how much I can discuss as to what I'm trying to do don't want to get banned lol but I'm trying to get get my line for vm to work...Mods rather than ban please I would appreciate if post could be edited and pm sent that way I know what the limits are. thx

Quote from Honcho

lolz i run openelec in nand tbh , i see no real benifit for my use i only really E2 to run rats updater to update my
chan list ;) and find a 2gig msd does that easily enough , but with the new fixes to openelec that lets you boot openelec to openelec
i will be next testing to see it lets me boot openelec nand to lakka MicroSd as lakka based on O/e so hopefully its achievable now as wernt b4
in that was a pain in the ass , so chances me sticking E2 in nand are slim to none tbh , yah could try using the backup tools in E2 on one of the Msd backups and then dumping it onto nand , cant say for sure it will work because im sure the nand versions are older now and dont think online update is a good idea on any image bar Pbnigma and then if i mind right there nand version published is before online update but hey worth a go though :) post yer results if you do :)

That's not a bad idea I could try that and could give some results I will definitely ive this a shot and post.

Quote from Honcho

go to laptop and loginto the webif for oscam via your wetek ip :16003 and make sure the reader is enabled ;)
also have you activated it in following via remote control

menu , info pannel , softcam pannel and select emu then green(2) to restart the cam ?
you always need to start the cam via remote n reader via webif for oscam .

if you done this already let me know

Hey bud

thanks for the info as I'm installing openATv and everything from scratch and its the first time..ive only managed to install open bouquette and cross epg aswell as oscam 11198 to wich I failed miserably...

Although I found one of your sdcard backups which has more than what I need so will play with that and see if I can get it to work and then move to the nand and see where I'm missing what

In the mean time if you can do a nand of this....It would be epic

http://linuxsat-support.com/showthread.php?t=91920

Kind regards

Kinda new slowly getting there let me re edit

- - - Updated - - -

Okay these are the settings I got after installing oscam10660 and nothings clearing

oscam.config

[global]
logfile = /dev/tty
clienttimeout = 4000
clientmaxidle = 300
netprio = 1
nice = -1
maxlogsize = 1000
waitforcards = 0
preferlocalcards = 1
dropdups = 1

[cache]
cwcycle_check_enable = 1
cwcycle_check_caid = 0100,0500,1810
cwcycle_allowbadfromffb = 1

[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
request_mode = 1
user = dvbapi
read_sdt = 1
write_sdt_prov = 1
boxtype = dreambox

[webif]
httpport = 16003
httpcss =
httppiconpath =
http_prepend_embedded_css = 1
httprefresh = 20
httppollrefresh = 20
httpshowpicons = 1
httppiconsize = 45
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 127.0.0.1,192.1.0.0-192.168.255.255
http_status_log = 1

oscam.server

[reader]
device = xxxxx.xxx,27000
key = 0102030405060708091011121314
user = xxxxxxxxxx
password = xxxxxxxxx
label = name of server.xx
protocol = newcamd
group = 1

osscam.user

[account]
user = dvbapi
pwd =
betatunnel = 1833.FFFF:1702
uniq = 3
au = 1
group = 1,2,3,4
cccmaxhops = 5
cccreshare = 1
cccignorereshare = 1

I don't seem to have a oscamdvbapi?? Any input pls

Hi

Ive managed to install openhdf and installed oscam and got to a point of finding the config file for the cam which is under tuxbox/config.

Now I know you have to convert your nline to the following and put in the oscam.server file?

[reader]
label = server1
protocol = newcamd
device = xxxxxxxxx.xx,27000
user = xxxxxxxxx
password = xxxxxxxxx
key = 0502040888994455091011121314
group = 1

Is that all I need to have in their with my details?

Also do I need to edit any other files? I'm not srunning any servers or anything just my own box to clear my line?

Sorry mods of I mentioned anything that I shouldn't...My apologies

Ive done the above and nothings clearing...eagerly awaiting for someone to give input pls
Kind Regards

- - - Updated - - -

I'm gonna start from scratch

I will be installing open ATV on my wetek On its nand with autobouquet and cross epg.

What oscam file link would be good so I can install that too and what files need to be edited with what...if someone helps me with this and gets it working I will write out a in detail setup guide for a wetek so will make easier for folk with everything and all the links in one post. Promise

Regards

Hi

Sorry if this is the wrong place bud...I'm trying to set up a Weten open elec I have managed to get a clean OpenATV to nand and installed auto bouquet and cross epg...Now the final hurdle which is the oscam... I have some threads showing how to convert mgcamd to oscam which is as follows

[reader]
label = server1
protocol = newcamd
device = xxxxxx.xx,50000
user = XXXXXXXXXX
password = XXXXXXXXXX
key = 0502040888994455091011121314
group = 1

Now where do I paste this, into to which file? bare in mind I'm not setting up any servers clients what not just solo guy and his own box aka me

Will this be pasted into etc/tuxedo/config and then oscam.server file?

and then enable oscam from softcam menu?

Also what's the difference between

enigma2-plugin-softcams-oscam_10660_cortexa9hf-vfp-neon.ipk

&

enigma2-plugin-softcams-oscam-emu_10660_cortexa9hf-vfp-neon.ipk

I installed the 1st one which is enigma2-plugin-softcams-oscam_10660_cortexa9hf-vfp-neon.ipk and under tuxbox folder I don't have any other folder apart from SCCE

Kind regards

Quote from Honcho

There is some nand images posted but there older versions i have not been shown how to convert in run Openelec in my Nand

Ahaa thank you yes I found a few nand ones..which helped but I'm trying to find a backup as it has a lot of the stuff needed pre installed so kinda helps. I also noticed when I used the nand ones in link below they keep bricking my box and wont boot after installation....so that was a fail

http://linuxsat-support.com/showthread.php?t=93739

I quite like this one and gives me something to work with is there anyone here who can make this into a nand flashable structure please?

Thank you

Hi

Is there anyway to have this so it runs from nand and not sd card?

Thx