Posts by sgw869

Issue resolved
I was able to try another line which worked perfectly
newcamd would not work at all on the 102e

Without the help from codar I would still be in a fix
many thanks codar
Sgw

28.2
I have replied to PM

Hello codar

Setup everything, it says connected to NDS, still scrambled
I reboot NDS changes to unknown still scrambled
Could the stb be a dud?
Best regards
Sgw

Hello codar
Latest, I opened the patch/rar file and extracted just the patch
Loaded onto 102e no problems
Using my other box to ping server all I need is to put IN xxxxx.dyndns.xx and it pings OK
I have tried that way with the 102e without success
Do you think I need to input everything in i.e. xxxx.dyndns.XX...then both ports
then username then password
autoconnect then login...and then try and ping
One last question
Because I am using newcamd would I put/try c:...or n:
also is there a space between : and the first server letter
Many thanks
Sgw

Hello codar
I changed compatability view and the patch downloaded as a rar ext file
Do I need to somehow extract a certain file from the rar file?
1. factory reset
2. allcode+bootloader/upgrade file V1.26B3.abs
After upgrade unit reboots, then all I see is the V1.26B3.abs...no additional files namely the rar patch
I have tried formatting three separate USB sticks always the same result no patch can be found
If there is anything else you can think of I would appreciate it
I am working away all day tomorrow
So early Friday I will be online
Once again many thanks
Sgw

Hello codar
Many thanks for your perseverance in this matter
Your last instruction ref me seeing php files might help me immensely
Over four hours today its been
1. factory reset
2. allcode+bootloader/upgrade file V1.26B3.abs
3. Trying to patch all I was getting was... no files
Now I see why, I will read your links and hopefully I will succeed
I was thinking of trying RS232 but I need to buy the cable
I will try now....if I fail I will take up your personal message offer
Once again many thanks
Sgw

Hello codar
I have installed the patch you suggest, the patch is a php file is this correct
Can you please direct me from the start
I do a factory reset, all it clears are the channel lists
What do I then install is it just the php file or do I also install the firmware .abs package

I do know my connection is good and the line works in my other box, I am trying to set this one up as a spare
The working box is powered off and the Ethernet cable disconnected before I try the 102e box
Many thanks
Sgw

Hello codar
I have tried every way possible inputting info into url still unable to ping/view scrambled channels
On the network setting page I am inputting username/password autoconnect to yes
Press login button successful
its then reads CA TYPE1 NDS...I don't know if this sheds any more light on the subject
Also do I need to manually input my Lan Mac address
Best regards
Sgw

Hello codar
Still in trouble, I put c: xxxxxxx.dyndns.tv into the url, tried to ping still failing
I put a space after c:
After it wouldn't ping I rebooted the box, went into newcamd client edit and the c: xxxxxx.dyndns.tv info was all over the place
Just c was in url
both port numbers were empty
username was dyn
password dns
Is it possible I have installed the wrong firmware and patch
Firmware was A102E _20140428_V1.26B3.abs
Patch 1679d1393529604

Many thanks for your earlier reply
Best regards
Sgw

Hi
I have a new Ferguson 102e
I have updated the firmware
I have installed a patch
As read on forum
I am trying to install my Cline, I go to networking setup
App selection
I select Newcamd Client
Press red edit button
Now the problem starts
After pressing the edit button I see from top of page down
Server Number 1
Url blank.....do I put something in here?
Ping
Port...Port
User name
Start
Login
I put my port numbers in
I put user name in
I put password in
Press start
Press login...it then says connected
Obviously I cant connect to scrambled channels
So please what do I insert into Url so as to allow me to ping
Many thanks in advance
Sgw

Hello El Pirate
I have a 102e box
I have followed your previous posts regarding inputting my details into newcamd
My problem is when I select newcamd server in App selected function, the red edit button
I cannot find where my server name is supposed to go
For me to connect I need
Server name
User/name
password
port
I you can point me in the right direction, so I can insert my server name, I would be grateful
Best regards
Sgw

Hi Master G

Many thanks for info, Monday I will try contacting my Isp service tech and ask him to open a port for me.
I will then try and see if I can be found.
Best regards
Sgw

Hi Master G
Basically then could I pluck a number out of thin air? lets say 3366 and that should work

At the moment I am using a pre configured GI 6699e combo box so I cannot look at the CCcam page, am I correct in assuming their is a
# line called server listen port
Best regards
Sgw

Hi
I have searched the forums but my porblems dont seem to be here.
Problem one is my router TP-LINK TD-W8901G is locked by my Isp provider, so therefore I cannot enter config page to set up port forwarding. I think I might be successful if I contact my Isp tech department and get into the config with their assistance.
Second puzzle is which port to use, I have read many articles saying stay with port 12000, is this the best or are there alternative ports.
Third problem is when I visit port forward website the port lists are all behind alphabetical games etc, so how do I choose.
Best regards
Sgw