Hello,
is there a chance to get higher volume. Even if I push to maximum it is not really loud. And by even maximizing TV volume it still is not perfect.
With stalker plugin it is not an issue with the volume, how come with the Netflix plugin? Any chance somewhere to increase volume?
Hello friends and admins, please Please Please let me know a problem. I have a 7020HD DreamBox and I use the latest OpenATV image version, and I use the emulator ncam 5.5 and Oscam emu 11424 but none of the Powervu channels are open. This has just happened after the image update. Please Please Please Please help. Thank you.
When you flash the box you usually have to install the CAMS again. The configs then get overwritten as far as I'm aware. Did you check and align the entries again?
@pierangelo74 you made my day:thumbup: found the tiny difference :)
Works like charm
Nice AFN picon, have to look for them...
Nevertheless, whatever some smart alecs might point out around here. The AU is not working on OpenATV 6.2 with a DM800se. And perhaps on the one or other box it might be the case too. I doubt we are all idiots here and do not use properly configs.
As long as ECM keys are posted I can live with this :)
Oscam r770 does bot work on my OE2.0 dm800se. The CAM does not even start, older OSCAM versions and the ones on the feed from OpenATV are not an issue. AFN on oscam worked before fine even with AU.
That is why I use Ncam now, only problem AU is not working. Always need to wait for ECM keys and put them in manually.
voyager1972 I actually wanted to use the CAM inbuild AU. The configs do look fine and indicate AU as active. But as mentioned no joy.
ncam working fine with afn .........key changes are very frequent now...
with automatic key update or not? I have no luck here
Is AU actually working with Ncam 5.5 on any device? Not working on my box, with ECM fine though. So wondering if it's a config issue only or perhaps proper EMM missing.
Do you have a really large SoftCam.key file? You can check with the webif and look under readers and select the "i" button under "actions" for the emu reader and it will show the entitlements (keys) that it has loaded.
The file only contains powervu keys, nothing else. They are shown and listed there where you refer to. Not sure why row three looks so strange.
Just put in some xxx below...rest is genuine :
key 0E00 00009E 00544CE1 AB6xxxxxxx7E7D
key 0E00 00009E 00xxxxxx 00000000000000
key 0E00 13E1F8 6 01
key 0E00 00013E 001xxx34 576xxxx9B45
key 0E00 00013E 00xxxx247 3D3xxxxDE025
key 0E00 00013E 001xxxA5 3BAxxxA8EAE
key 0E00 00013E 001xxx90 002xxxxxx919BC
key 0E00 00013E 001xxxC6 8A8xxx3F5F
key 0E00 00013E 001Dxxx0 FCExxxxxxx0E05
key 0E00 00013E 001xxxB5 12Fxxxx4F6062
key 0E00 00013E 001xxx8C EBxxxxxxD8E
- - - Updated - - -
I just see a difference between 9 degrees and the 13 degrees, but I assume this is created by the Emulator that way? In the Provider ID the SID is integrated:
key 0E00 9E0011 01 9E8xxxxF3B23
key 0E00 9E000A 01 9E8xxx3F3B23
On 13 degrees it is not the case:
key 0E00 00013E 001xxxB5 12Fxxxx4F6062
key 0E00 00013E 001xxx8C EBxxxxxxD8E
Is that the reason?
Since I have a motor I checked 13 dregrees as well. I extended the key file for the channel bvtv. No luck here, is the CAM supposed to work for that channel as well? The emulator does not pop up on the screen.
Logfile:
2016/03/13 11:19:55 370DA5E4 c (dvbapi) Demuxer 0 serving srvid 1F86 (0E00@000000:1F86 unknown) on adapter 0000 camask 0001 index 0000 pmtpid 13CE
2016/03/13 11:19:55 370DA5E4 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 17B6 ANY CHID PMTPID 13CE VPID 00D2
2016/03/13 11:19:55 1769B6FB r [Emu] Key not found: P 1F86 00
2016/03/13 11:19:55 1769B6FB r [Emu] ECM failed: Key not found
2016/03/13 11:19:55 370DA5E4 c (ecm) dvbapiau (0E00@000000/0000/1F86/40:839C359DA787430399839E367F209A02): not found (2 ms) by emulator
2016/03/13 11:19:55 370DA5E4 c (dvbapi) Demuxer 0 stream Audiostream (MPEG-2)(type: 04 pid: 00c8 length: 0)
2016/03/13 11:19:55 370DA5E4 c (dvbapi) Demuxer 0 stream Videostream (MPEG-2)(type: 02 pid: 00d2 length: 10)
2016/03/13 11:19:55 370DA5E4 c (dvbapi) Demuxer 0 found 1 ECMpids and 2 STREAMpids in PMT
2016/03/13 11:19:55 370DA5E4 c (dvbapi) Demuxer 0 serving srvid 1F86 (0E00@000000:1F86 unknown) on adapter 0000 camask 0001 index 0000 pmtpid 13CE
2016/03/13 11:19:55 370DA5E4 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 0 disabled ecmpids!
2016/03/13 11:19:55 370DA5E4 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 17B6 ANY CHID PMTPID 13CE VPID 00D2
2016/03/13 11:19:56 1769B6FB r [Emu] Key not found: P 1F86 00
Keyfile looks the follwoing:
; Group 0x13E 13E channels:
P 0013E1F86 00 8CxxxxxxxxxxF1
P 0013E1F86 01 F6xxxxxxxxxxA8
P 0013E 00178xxx 57xxxxxxxxxx45
P 0013E 00194xxx 3Dxxxxxxxxxx25
P 0013E 001B4xxx 3BxxxxxxxxxxAE
P 0013E 001B6xxx 00xxxxxxxxxxBC
P 0013E 001C6xxx 8Axxxxxxxxxx5F
P 0013E 001D1xxx FCxxxxxxxxxx05
P 0013E 001D2xxx 12xxxxxxxxxx62
P 0013E 001D2xxx EBxxxxxxxxxx8E
Ok Joe, will take it to heart and into consideration next time to provide more details. And spot on, just saw your post, your link above. Yes these two settings made the difference yesterday night. Did not mention the stream relay bit yesterday. Should have looked around in the forum, would have saved me lots of time. Nevertheless I can confirm works fine when these default settings are changed.
Perhaps it is worth while creating a CAM for DM only, with the settings straightend out. I assume a lot of folks might face this issue in future. I went through all these settings since I could not understand why it was not working...
Got it working myself ;-) Not the greatest support around here :-(
API for extended CWs was the problem, default was set to OE 2.2
After changing it to OE 2.0 the screen went bright.
All channels working :-)
Ok I made a mistake. Looks better now but the screen stays black 
I'm clueless now
2016/03/09 22:08:44 47850A97 c (dvbapi) Demuxer 0 found channel in cache and matching prio -> start descrambling ecmpid 0
2016/03/09 22:08:44 47850A97 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1772 ANY CHID PMTPID 138A VPID 04EC
2016/03/09 22:08:44 47850A97 c (dvbapi) Demuxer 0 stream Videostream (MPEG-2)(type: 02 pid: 04ec length: 10)
2016/03/09 22:08:44 47850A97 c (dvbapi) Demuxer 0 stream Audiostream (MPEG-2)(type: 04 pid: 04c4 length: 0)
2016/03/09 22:08:44 47850A97 c (dvbapi) Demuxer 0 stream Audiostream (MPEG-2)(type: 04 pid: 06ba length: 0)
2016/03/09 22:08:44 47850A97 c (dvbapi) Demuxer 0 stream Audiostream (MPEG-2)(type: 04 pid: 0532 length: 0)
2016/03/09 22:08:44 47850A97 c (dvbapi) Demuxer 0 stream Audiostream (MPEG-2)(type: 04 pid: 04d0 length: 0)
2016/03/09 22:08:44 47850A97 c (dvbapi) Demuxer 0 stream Audiostream (DTS 8)(type: 85 pid: 0428 length: 0)
2016/03/09 22:08:44 47850A97 c (dvbapi) Demuxer 0 stream Audiostream (Dolby Digital Plus)(type: 87 pid: 0425 length: 0)
2016/03/09 22:08:44 47850A97 c (dvbapi) Demuxer 0 stream Reserved(type: 89 pid: 1b6a length: 11)
2016/03/09 22:08:44 47850A97 c (dvbapi) Demuxer 0 stream Reserved(type: 89 pid: 1b71 length: 11)
2016/03/09 22:08:44 47850A97 c (dvbapi) Demuxer 0 stream Reserved(type: 89 pid: 1b6f length: 11)
2016/03/09 22:08:44 47850A97 c (dvbapi) Demuxer 0 found 1 ECMpids and 10 STREAMpids in PMT
2016/03/09 22:08:44 47850A97 c (dvbapi) Demuxer 0 serving srvid 0002 (0E00@000000:0002 unknown) on adapter 0000 camask 0001 index 0000 pmtpid 138A
2016/03/09 22:08:45 47850A97 c (ecm) dvbapiau (0E00@000000/0000/0002/40:709E17955DD523FA261C22AC79FD9432): found (4 ms) by emulator
2016/03/09 22:08:45 47850A97 c (ecm) dvbapiau (0E00@000000/0000/0002/40:D9E6C897B60AD0B2FE9D0E9E8E4458AB): found (1 ms) by emulator
2016/03/09 22:08:46 47850A97 c (ecm) dvbapiau (0E00@000000/0000/0002/40:727417EBD968C556407B028906AE5064): found (4 ms) by emulator
2016/03/09 22:08:46 47850A97 c (ecm) dvbapiau (0E00@000000/0000/0002/40:1019553E618C864E89E269C2A51562D3): found (1 ms) by emulator
2016/03/09 22:08:47 47850A97 c (ecm) dvbapiau (0E00@000000/0000/0002/40:D540E7DB401EA89AC0D59AD46D888395): found (3 ms) by emulator
Chaps I'm stuck here. I have a key file in place. Any Idea? Thx for any hints
2016/03/08 18:22:35 1FEE350A r [Emu] ECM failed: Key not found
2016/03/08 18:22:35 21E63B92 c (ecm) dvbapiau (0E00@000000/0000/000A/40:1FBD65F67DC44D9356B3BCD7B2515FE1): not found (1 ms) by emulator
2016/03/08 18:22:35 21E63B92 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 0 disabled ecmpids!
2016/03/08 18:22:35 21E63B92 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 177A ANY CHID PMTPID 1392 VPID 0424
2016/03/08 18:22:36 1FEE350A r [Emu] Key not found: P 000A 01
2016/03/08 18:22:36 1FEE350A r [Emu] ECM failed: Key not found
