Dear plz share Server, Confg & softcam key files for AFN. Thanks
Posts by sinopak2
-
-
Still no success opening Asia Sat 7 105.5E Sony package, no audio / video. Any fixes?
-
Plz anyone help on the above issue, much appreciated your support.
-
Hi all plz find below my log file, It update the keys and showing connected but no audio/video. Can any one help plz. Im also attaching herewith my cam files.
2018/05/06 14:52:29 70D7C14D c (dvbapi) Demuxer 0 found 2 ECMpids and 3 STREAMpids in PMT2018/05/06 14:52:29 70D7C14D c (ecm) sinopak (0E00@000000/0000/0047/7E:296BDB89C20642747A77D64100DC4DD7): found (1 ms) by emulator (L/1/2/2)2018/05/06 14:52:29 70D7C14D c (ecm) sinopak (0E00@000000/0000/0047/7E:C4B24B323328F32E6AC358086C2C9E32): found (1 ms) by emulator (L/1/2/2)2018/05/06 14:52:31 70D7C14D c (ecm) sinopak (0E00@000000/0000/0047/7E:D0B899E8774F0F89A997E71677435853): found (2 ms) by emulator (L/1/2/2)2018/05/06 14:52:35 70D7C14D c (config) 11 service-id's loaded in 0 ms2018/05/06 14:52:41 70D7C14D c (ecm) sinopak (0E00@000000/0000/0047/7E:D6028D627D926230CF107306E99C632E): found (1 ms) by emulator (L/1/2/2) - LePLEX HD -
Dear all Sony Network on Asiasat 7 105.5E is down since yesterday, plz share new PowerVu keys or any solution?
-
MasterG Bro here is my ncam.server & Ncam.cfg. Cartoon Network on Asiasat 7 not working. Plz help with where my setting is wrong. Your support is much appreciated.
Ncam.server
####################### SoftCams ############################
[reader]
label = myemulator
protocol = constcw
device = /etc/tuxbox/config/SoftCam.Key
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,007301,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
group = 1
[reader]
label = myconstantcw
enable = 0
protocol = constcw
device = /var/keys/constant.cw
cacheex = 0
cacheex_maxhop = 0
cacheex_allow_request = 0
group = 1
dropbadcws = 0
disablecrccws = 0
[reader]
label = emulator
protocol = emu
device = emulator
caid = 090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
detect = cd
ident = 090F:000000;0500:000000,023800,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
Ncam.cfg
[global]
logfile = /tmp/ncam.log
clienttimeout = 12000
fallbacktimeout = 3000
bindwait = 60
netprio = 1
nice = -20
maxlogsize = 1024
waitforcards_extra_delay = 200
preferlocalcards = 1
usrfile = /tmp/ncamuser.log
cwlogdir = /tmp/cw
readerrestartseconds = 1
dropdups = 1
block_same_ip = 0
block_same_name = 0
lb_nbest_readers = 6
lb_nfb_readers = 6
ecmfmt = P: c:0p:s:d:i #ECM_L:l #CW=w HOP:j
failbantime = 1440
failbancount = 2
[anticasc]
enabled = 1
numusers = 1
samples = 5
penalty = 1
aclogfile = /tmp/aclog.log
denysamples = 4
[cache]
delay = 100
max_time = 30
max_hit_time = 60
cacheexenablestats = 1
csp_allow_request = 0
csp_allow_reforward = 1
cacheex_cw_check = 05@032830:88:2000,05@030B00:88:2000
csp_block_fakecws = 1
cwcycle_check_enable = 1
cwcycle_check_caid = 0500,0100,1811
[cs378x]
port = 13001@1811:3600,3315,3311
suppresscmd08 = 1
[newcamd]
port = 10000@0100:FFFFFF;10001@0200:FFF000,FFFF00;10002@0300:FFFFFF
key = 0102030405060708091011121314
mgclient = 1
[cccam]
port = 9000
nodeid = 43F7DDF9102A157E
version = 2.3.0
reshare = 0
reshare_mode = 0
stealth = 1
[streamrelay]
stream_relay_enabled = 0
stream_emm_enabled = 117440512
[dvbapi]
enabled = 1
au = 1
pmt_mode = 1
delayer = 60
user = dvbapiau
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 2
boxtype = dreambox
[webif]
httpport = xxxx
httpuser = xxxx
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,255.255.255.255
-
Not working OpenPli 6.1 on VU Solo SE.
-
Dear which version is suitable for DM800 HD PVR, for power vu. Image OpenPli 2.1, plz advise. Thanks
-
ok mr sinopak2 try this oscam config afn sony asia all ok video audio both
Thanks Dear Solved, All Working now.
-
how should I do any change in dvbapi
open ncam.conf and look for [dvbapi].
master G, pz share current ncam.server, ncam.conf & Ncam. services files for channels not giving audio on Asiasat 7. Thanks
-
add one more reader fir powervu and cacheex = 1, services = xxx
add oscam. service, name it xxx and add sid for ch without audio working.
its working for me for intelsat20, measat3
Dear Plz share reader for no audio channels. Or share your ncam.conf. and ncam.service. I am attaching mine, plz made new reader and service, I will add sid. Thanks
-
Dear I have the same Issue on my VU Solo SE V2, Image blackhole, & Ncam 4.2. No audio on Some channels on AsiaSat 7. Help is much appreciated.
-
Dear I have DM800 HD PVR, plz advise which version of Ncam is suitable, image is Estar-openPli. I have tried Ncam all Imges file, but after installation DM stuck on the booting and not started. Your help will be much appreciated, Thanks.
-
perfect images for estar sim open pli !!
Its really a good image, but after powering off my dm hdpvr he will not start again.
Do i something wrong ?
Greetings from Holland, HG
I also have the same problem, anyone can help. I have DM 800 HD PVR.
-
Dear lates version of Ncam V4.2 will work on DM 800 HD PVR and open Asia Sat 7? Is it safe to install on DM 800 & VU+ SOLO SE V2?