Posts by jonaldo9

  • abm setup for other sats

    I have used ABM to pick up other sats i.e 19.2, but it doesn't number them like it does for 28.2 S*Y. is there a config file or setting to get it to do this for 19.2 S*YDE??

    or ios it only customised like this for 28.2??

    Any help appreciated

  • How to get ABM to pick up the working channels on SLY

    Given the issues with certain transponders on SLY, I read that there was a way to bypass these transponders and put in the equivalent channel that works on another transponder. Is there anybody who can explain how I get this to do this?? I am running a TM Nano se+ on Open Pli using ABM 2.5


    any help appreciated:?:

  • issue watching same channel on 2 boxes

    the box that has the card in is an eagle Linux (enigma 1) My other box is a Technomate nano se+


    Server config:
    [reader]
    label = SKYUK
    protocol = internal
    device = /dev/sci0
    caid = 0963
    boxid = /dev/xxxxxxxxxxx
    cardmhz = 2700
    mhz = 450
    detect = cd
    group = 1
    emmcache = 1,3,2
    blockemm-unknown = 1
    blockemm-g = 1
    saveemm-u = 1
    saveemm-s = 1


    config file


    [global]
    nice = -1
    logfile = /var/log/oscam.log
    clienttimeout = 5000
    fallbacktimeout = 2500
    clientmaxidle = 120
    cachedelay = 120
    bindwait = 120
    resolvedelay = 30
    serialreadertimeout = 1500
    maxlogsize = 10
    waitforcards = 1
    preferlocalcards = 1
    saveinithistory = 1
    keepalive = 1


    [dvbapi]
    enabled = 1
    user = linuxsatsupport
    boxtype = dreambox
    au = 1


    [newcamd]
    port = 10001@0963:000000
    key = 0102030405060708091011121314
    keepalive = 1



    [cccam]
    port = 12000
    version = 2.1.3
    build = 3165
    reshare = 1


    [webif]
    httpport = 8888
    httpuser = xxxx
    httppwd = xxxx
    httprefresh = 15
    httpallowed = 192.168.0.0 - 255.255.255.255
    debug = 255


    [monitor]
    appendchaninfo = 1


    Any help greatly appreciated

  • issue watching same channel on 2 boxes

    HI All


    Hope someone can help. Recently switched to OScam and have a 0963 sly card. only sharing between rooms in my own house. Yesterday was trying to watch the same channel in both rooms and it would only show on the box that didn't have the card in.


    can anyone advise any resolution to this issue?? as using ccam before and never had this issue

  • cross epg 0.8.1 issue

    [quote='abu baniaz','https://linuxsat-support.com/index.php?thread/&postID=386869#post386869']I don't think his issue is obtaining EPG data, but displaying it. If this is the case, see here
    [url]http://linuxsat


    updating my cooltv guide worked perfectly. Thanks

  • skyNEW Skin By Chababu

    Chababu - this skin looks awesome, great work. Quick question. On the last version of sky new you had the option for the InfoBar to have the description to show the info for whats on now and next. Any chance you can put this option up for this skin??


    Also what is quick EPG ( in your screenshots)?? I cant seem to get this with any option?


    - - - Updated - - -



    Hi mate. I had similar issues when using the v2 of Sky New. You need to adjust the settings in your Cool TV guide setup. Please see my settings below. Hopefully these will help you out. The colours and bottom options and type of EPG may be down to your image I believe.


    b35075283a515d.jpg
    9b863a1eb12debb4c5a58da3d.jpg
    68e09a4f07cd1d11d1be2d5a9.jpg


    Hope this helps.

  • cross epg 0.8.1 issue

    [quote='abu baniaz','https://linuxsat-support.com/index.php?thread/&postID=386869#post386869']I don't think his issue is obtaining EPG data, but displaying it. If this is the case, see here
    [url]http://linuxsat


    that's correct. thanks for all your help. will try out today and see if it works

  • cross epg 0.8.1 issue

    HI There


    Hoping someone can help. for the last few days when I press my EPG it flashes onto the ePG but doesn't stay on, so I cant use the EPG. I tried to delete all bouquets and reimport, but still same issue.
    I am running a TM nano se+ with open pli image, using sky new skin by Chababu. All has been working with no issue for months, just gone weird in last couple of days


    Any help appreciated?

  • how to set up oscam to read my s*y card

    all help greatly appreciated, all resolved and back working again. Thanks so much as always


    - - - Updated - - -


    sorry can I ask a quick question. Ive never been too great on understanding Emms. in CCam it used to update, I knew where to check it using CCam info plugin and was ok with that. However now using Oscam just want to make sure I'm doing it correctly. I used the configs from this post - http://linuxsat-support.com/sh…0-Red-Card?highlight=0960 will this update my emms as it should do, or should I be changing some values to make it run better?? should my clients be updating the emms instead of me??


    any help/advice appreciated

  • how to set up oscam to read my s*y card


    Hi MAster G, thanks for replying. I have managed to get this going amd all is clearing well. Was reading through a very helpful thread on here, my only issue was that I didn't know where to add the boxkey, but have now added to server and all is working great.


    I have both an enigma 1 and enigma 2 receiver and it was actually my enigma 1 where I am using this to start.


    However now that I have resolved getting the card to work, I know need to get my shares working. I have them all set up in my users folder, but do I just need to set them up on their box with me as the server?? any example configs of how to do this??


    My box is an eagle running eagle image v5.1. the card is only paired to an old SD box


    Any help appreciated

  • how to set up oscam to read my s*y card

    Hi All
    I have been using CCam to read my 0963 card but since late last year it has stopped clearing premium channels so was advised to use Oscam. Can anyone advise how to add my boxkey to oscam so I can use it to read my card??


    Also if I need to do anything else please advise. I have used the converter to make my user and server files


    Any help appreciated

  • Sky 0960 suddenly dark

    Quote from master G

    Which receiver and image ? Once we know that we can give you whats needed..


    i have an eagle with eagle 5_1 image. I paired card again online and it now clears sly sports 2-5, but still no movies and no sly 1!! however if I go through the multiple versions of Sly1 & sly sports 1 in my channels some are clearing!!!! to say I'm baffled is an understatement. I am starting to wonder if its a bit of clever play by sly!! seems to out the blue for so many people on here.

  • Sky 0960 suddenly dark

    Quote from codar

    Make sure white card is paired to a standard definition receiver as it won't work if you pair it to a hd one (you won't clear premium content, movies/sports)


    Thanks for replying guys. The card is paired to a SD box and has been working fine. When I put the card into the original SD box it works fine on all channels, but going back into my box it doesn't clear the movies/sports/s*y 1!!?? so confused about this. have left it in the original box for 2 days now. I am using CCam. someone said to change to oscam but I cant find a guide to setting up ( never used anything apart from CCam) so not sure what how i'd set up as it seems more complex.


    Any suggestions greatly appreciated


    - - - Updated - - -


    Quote from wadey1457

    Have you done an update? Look above


    when you say update., do you mean putting it back in original paire sd box?? if so yes, and put on Sly 1. all works fine in original box. Any other suggestions??