What size skin are you using ? In KodiLite - change the skin resolution. Does that help ?
I changed from full hd to hd but didn't fix the problem.
The decoder lcd display is not working.
I don't think there is a connection with the video resolution
Hall
Hi pcd
I have a problem concerning the functioning of the LCD of my Vu + Duo2
When I install this version of Kodilite I don't see the picons on the display and that type of set highlighted in the screen disappears.
If I uninstall kodilite everything returns to normal.
It would be interesting to understand which file interferes with the proper functioning of the display
Many thanks 
Hall
Display MoreI suggest you , if you want download e2iplayer ( Hungarian version ) from page 95 , post #1881. In that version works all Italian hosts
except guardaserie , filmpertutti and filmstream hd because links not works ( filmstream hd not works anymore ). I also have that
version installed.
Added two parsers in urlparser ( assia2.com for Webstream host , strumyk.tv and watchsb.com , streamsb link , cinemalibero host ).
Thanks
Panda555 for the constant help you give us poor people
I ihave done everything you suggested but the situation has not changed....
Which server should I set up?
Which GitLab?
Thanks
Hall
I noticed that is Mario fix dood parser and I replaced it in my urlparser, but unfortunately it doesn't work. I already asked
on Mario gitlab if he can fix once more.
Many thanks @Panda555 :)
My last update (2021.0916.01 Gitlab Maxbambi)
and unfortunately these host groups haven't worked for a long time:
Tantifilm,CinemaLibero,Altadefinizione01,FilmStreamHD,CB01,Altadefinizione
GuardaSerie,Filmpertutti,CasaCinema,AltaDefinizione.
Would it be possible to keep working hosts ?
Thanks :wink:
Hall
Hi Lululla
Thanks for your work
!
STVCL worked in version 1.1
I installed version 1.2 and the decoder goes to green screen right away
I looked but can't find log.txt to send to you.
What can be the solution?
Thanks:)
Hall
Tanks @Panda555
This screen is related to Skylinewebcams.
How to get rid of this annoying video upload?
How to see it immediately without uploads?
Thanks
Hall
Good morning
Where can I find the latest e2iplayer maxbambi version update?
I downloaded here: ht**s://gitlab.com/maxbambi/e2iplayer
but I don't think it's last ....the date is like my version (27.05)
Thanks
Hall
Display MoreDisplay MoreDisplay MoreYes , but you must read.........
4.now ftp to your receiver and move open-multiboot-upload folder to /media/usb replace
give permissions 755 on inside files
5.move any nfi image to /media/usb/open-multiboot-upload (one for every time)
6.edit unpack-nfi.sh file in the last line and replace "OPENSPA" with your prefer name for image
if use hdd must change WORKDIR and INSTALLDIR
7.telnet to /media/usb/open-multiboot-upload and give this command $ ./unpack-nfi.sh
Wait about 10 min and( you can see on terminal finish of job) your new image extracted to /media/usb/open-multiboot dir
8.reboot your box
9.On openmultiboot interface you can see new images select the new and press Ok
YOUR RECEIVER REBOOT ON NEW MULTIBOOT IMAGE.
Hello @parageria
I followed your instructions step by step.
Installed image via telnet.
Checked via ftp for existence of root folders.
I rebooted and selected PKT image in the openmultiboot interface.
But unfortunately when I had to load the new image and restart ...decoder was blocked.
Now I am forced to read the usb with another decoder and delete image unless you give me some advice......
Thanks
Hall
don't forget we are on clone dm
after install pkt before reboot, ftp to your receiver ,delete 3.2-dm800se dir, from /lib/modules/ (pkt image)
and put there the one from flash image (openbh)
reboot
read......
.....NOTE openmultiboot, boot any image with the same kernel-modules as is on flash you can install any my image and any image base on pli
for any image base to openatv must change kernel-modules to pli..
Hi
But.. I seem to remember that in that folder there are also the files for the trialtuner. Am I wrong?
Hall
Display MoreYes , but you must read.........
4.now ftp to your receiver and move open-multiboot-upload folder to /media/usb replace
give permissions 755 on inside files
5.move any nfi image to /media/usb/open-multiboot-upload (one for every time)
6.edit unpack-nfi.sh file in the last line and replace "OPENSPA" with your prefer name for image
if use hdd must change WORKDIR and INSTALLDIR
7.telnet to /media/usb/open-multiboot-upload and give this command $ ./unpack-nfi.sh
Wait about 10 min and( you can see on terminal finish of job) your new image extracted to /media/usb/open-multiboot dir
8.reboot your box
9.On openmultiboot interface you can see new images select the new and press Ok
YOUR RECEIVER REBOOT ON NEW MULTIBOOT IMAGE.
Hello @parageria
I followed your instructions step by step.
Installed image via telnet.
Checked via ftp for existence of root folders.
I rebooted and selected PKT image in the openmultiboot interface.
But unfortunately when I had to load the new image and restart ...decoder was blocked.
Now I am forced to read the usb with another decoder and delete image unless you give me some advice......
Thanks
Hall
Thank you very much @parageria
I will try on my return home with your instructions.
On my Vu+ I use multiboot and I have many images (also PKT).
How many images can I upload to DM800SE-SIM2-84D ?
Does it depend on the capacity of the usb ?
Regards
Hall
Display MoreDisplay MoreHello @parageria
Im using your image OpenBH on 4 HDSE in flash and openSpa 7.1 in multiboot
All was ok
Now i wanted to add PKT like a second image on multiboot but...
I pressed ok
but appeared the new image PKT in the multiboot list like was all ok
I chosed PKT in openmultiboot manager to boot with this image but it didn't start....
Any Solutions?
Thanks
Hall
OMB dont install nfi images
must use OPENBH-0.6-DM800SE-SIM2-84D-OPENMULTIBOOT-PARAGERIAGS
Hi @parageria
i'm already using as a flash your image OPENBH-0.6-DM800SE-SIM2-84D-OPENMULTIBOOT-PARAGERIAGS
Thanks
Hall
Hello @parageria
Im using your image OpenBH on 4 HDSE in flash and openSpa 7.1 in multiboot
All was ok
Now i wanted to add PKT like a second image on multiboot but...
I pressed ok
but appeared the new image PKT in the multiboot list like was all ok
I chosed PKT in openmultiboot manager to boot with this image but it didn't start....
Any Solutions?
Thanks
Hall
New Update
Hyperion 7.1 SVN-4265
Update with BluePanel Download Actualization
FTP login: root
passwd: pkteam
:smiling: Hall900
Tanks @Panda555 for your great contribution
I have HYperion image and and I can choose various options to install e2iplayer :
zadmario, maxbambi and others....
when a lot of time goes by I don't always remember which version I installed and I don't know a way to know which version I have ....
Thansk
Hall
Hello to all
With the latest update zadmario 07.05 the updates posted from the good blackmores, panda555, and jackpotsat uploaded by hand by me (through ftp)
disappear and even icons and even xxx disappear.
Does it happen to you too?
I lost xxx icon
:cool1:
New Update
Hyperion 7.1 SVN-4264
Update with BluePanel Download Actualization
FTP login: root
passwd: pkteam
:smiling: Hall900
but it is not mandatory :)
we will try to fix----------------------
try now
I tried but it doesn't work....
Since I have exodus also on KOdi can I extract the script from there?
Thanks
Hall
if it works it means that the oscript has installed it, the console would have given you an error otherwise instead of finished execution
and then why do you have to select the blank line if it gives you green screen? I just don't understand some questions
:sadgun:
If I wrote "I can't play exodus because it says the scripts are missing" mean it didn't work !
"Last thing ... In install addon (green button) in Missing required scripts, there is the last line that appears empty and if pressed gives a green screen as a result..."
This is a forum, and the purpose is to help other users to solve problems and not make errors like the one I reported.
Regards
Hall
