[root@localhost ~]# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 076b:3021 OmniKey AG CardMan 3121
Bus 003 Device 002: ID 1ea7:0002
[root@localhost ~]# opensc-tool -l
No smart card readers found.
# In addition to the built-in list of known cards in the
# card driver, you can configure a new card for the driver
# using the card_atr block. The goal is to centralize
# everything related to a certain card to card_atr.
#
# The supported internal card driver names can be retrieved
# from the output of:
# $ opensc-tool --list-drivers
# Generic format: card_atr <hex encoded ATR (case-sensitive!)>
# New card entry for the flex card driver
# card_atr 3b:f0:0d:ca:fe {
# All parameters for the context are
# optional unless specified otherwise.
# Context: global, card driver
#
# ATR mask value
#
# The mask is logically AND'd with an
# card ATR prior to comparison with the
# ATR reference value above. Using mask
# allows identifying and configuring
# multiple ATRs as the same card model.
# atrmask = "ff:ff:ff:ff:ff";
# Context: card driver
#
# Specify used card driver (REQUIRED).
#
# When enabled, overrides all possible
# settings from the card drivers built-in
# card configuration list.
# driver = "flex";
# Set card name for card drivers that allows it.
# name = "My CryptoFlex card";
# Card type as an integer value.
#
# Depending on card driver, this allows
# tuning the behaviour of the card driver
# for your card.
# type = "2002";
# Card flags as an hex value.
# Multiple values are OR'd together.
#
# Depending on card driver, this allows
# fine-tuning the capabilities in
# the card driver for your card.
#
# Optionally, some known parameters
# can be specified as strings:
#
# rng - On-board random number source
#
# flags = "rng", "0x80000000";
#
# Context: PKCS#15 emulation layer
#
# When using PKCS#15 emulation, force
# the emulation driver for specific cards.
#
# Required for external drivers, but can
# be used with built-in drivers, too.
# pkcs15emu = "custom";
#
# Context: reader driver
#
# Force protocol selection for specific cards.
# Known parameters: t0, t1, raw
# force_protocol = "t0";
# }
# Options for OpenCT support
reader_driver openct {
# Virtual readers to allocate.
# Default: 2
# readers = 5;
#
# Limit command and response sizes.
# Default: n/a
# max_send_size = 255;
# max_recv_size = 256;
};
# What card drivers to load at start-up
#
# A special value of 'internal' will load all
# statically linked drivers. If an unknown (ie. not
# internal) driver is supplied, a separate configuration
# configuration block has to be written for the driver.
# Default: internal
# NOTE: When "internal" keyword is used, must be last entry
#
# card_drivers = customcos, internal;
# Card driver configuration blocks.
# For card drivers loaded from an external shared library/DLL,
# you need to specify the path name of the module
#
# card_driver customcos {
# The location of the driver library
# module = /usr/lib/opensc/drivers/card_customcos.so;
# }
# Force using specific card driver
#
# If this option is present, OpenSC will use the supplied
# driver with all inserted cards.
#
# Default: autodetect
#
# force_card_driver = customcos;
# Configuration file for OpenSC
# Example configuration file
# NOTE: All key-value pairs must be terminated by a semicolon.
# Default values for any application
# These can be overridden by an application
# specific configuration block.
app default {
# Amount of debug info to print
#
# A greater value means more debug info.
# Default: 0
#
debug = 0;
# The file to which debug output will be written
#
# Special values 'stdout' and 'stderr' are recognized.
# Default: stderr
#
# debug_file = /tmp/opensc-debug.log;
# debug_file = "C:\Documents and Settings\All Users\Documents\opensc-debug.log";
# PKCS#15 initialization / personalization
# profiles directory for pkcs15-init.
# Default: /usr/share/opensc
#
# profile_dir = /usr/share/opensc;
# CT-API module configuration.
#reader_driver ctapi {
#reader_drivers = pcsc;
module /usr/lib/ctapi/libtowitoko.so {
# CT-API ports:
# 0..3 COM1..4
# 4 Printer
# 5 Modem
# 6..7 LPT1..2
# ports = 0;
# }
#}
# The following section shows definitions for PC/SC readers.
reader_driver pcsc {
# Limit command and response sizes.
# Default: n/a
# max_send_size = 255;
# max_recv_size = 256;
#
# Connect to reader in exclusive mode?
# Default: false
# connect_exclusive = true;
#
# What to do when disconnecting from a card (SCardDisconnect)
# Valid values: leave, reset, unpower.
# Default: reset
# disconnect_action = unpower;
#
# What to do at the end of a transaction (SCardEndTransaction)
# Valid values: leave, reset, unpower.
# Default: leave
# transaction_end_action = reset;
#
# What to do when reconnection to a card (SCardReconnect)
# Valid values: leave, reset, unpower.
# Note that this affects only the internal reconnect (after a SCARD_W_RESET_CARD).
# A forced reset via sc_reset() always does a full powerup.
# Default: leave
# reconnect_action = reset;
#
# Enable pinpad if detected (PC/SC v2.0.2 Part 10)
# Default: true
# enable_pinpad = false;
#
# Use specific pcsc provider.
Default: libpcsclite.so.1
# provider_library = libpcsclite.so.1
}
offf offf still problem.i dont understand i installed all need but still have problem :(
[root@localhost ~]# yum install opensc pcsc-lite ccid
Loaded plugins: fastestmirror, refresh-packagekit, security
Loading mirror speeds from cached hostfile
* base: ftp.dgn.net.tr
* epel: mirror.vit.com.tr
* extras: ftp.dgn.net.tr
* updates: ftp.dgn.net.tr
Setting up Install Process
Package opensc-0.12.2-2.el6.i686 already installed and latest version
Package pcsc-lite-1.5.2-8.el6_3.i686 already installed and latest version
Package ccid-1.3.9-3.el6.i686 already installed and latest version
Nothing to do
and my /etc/opensc.conf
thanks for answer. i using oscam and my config;
[reader]
label = dg
enable = 1
protocol = pcsc
device = 0
caid = 06xx
boxid = xxxxxxxxx
ecmwhitelist = 54,60,57,63
detect = cd
mhz = 600
cardmhz = 600
ident = 06xx:000000
group = 1
blockemm-unknown = 1
my other cards works with same config but just ixxxto card not working i dont understand.
thanks for my help.
hi i installed omnikey 3121 on my Linux. sorry my englesh is not very good.
all cards working on my omnikey but only i***** card not working.how to Works this i***** card on my omnikey.
please help me
thanks.
please !!! I still could not.
[root@localhost ~]# yum install opensc pcsc-lite ccid
Loaded plugins: fastestmirror, refresh-packagekit, security
Loading mirror speeds from cached hostfile
* base: ftp.dgn.net.tr
* extras: ftp.dgn.net.tr
* rpmforge: ftp.fi.muni.cz
* updates: centos.intergenia.de
Setting up Install Process
No package opensc available.
Package pcsc-lite-1.5.2-8.el6_3.i686 already installed and latest version
Package ccid-1.3.9-3.el6.i686 already installed and latest version
Nothing to do
im using centos 6.3
[root@localhost ~]# opensc-tool -l
bash: opensc-tool: no command
[root@localhost ~]#
[root@localhost ~]# yum search opensc-tool
Loaded plugins: fastestmirror, refresh-packagekit, security
Loading mirror speeds from cached hostfile
* base: ftp.dgn.net.tr
* extras: ftp.dgn.net.tr
* rpmforge: ftp.fi.muni.cz
* updates: centos.intergenia.de
Warning: No matches found for: opensc-tool
No Matches found
[root@localhost ~]#
2012/11/14 20:53:52 8D736E0 r ss [pcsc] IFD: Opening device 1
2012/11/14 20:53:52 8D736E0 r ss [pcsc] IO: PCSC establish context for PCSC pcsc_reader 1
2012/11/14 20:53:52 8D736E0 r ss [pcsc] PCSC failed establish context (80100006)
2012/11/14 20:53:52 8D736E0 r ss [pcsc] IFD: ERROR: Can't open 1 device
2012/11/14 20:53:52 8D736E0 r ss [pcsc] Cannot open device: 1
2012/11/14 20:53:52 8D736E0 r ss [pcsc] IFD: Opening device 2
2012/11/14 20:53:52 8D736E0 r ss [pcsc] IO: PCSC establish context for PCSC pcsc_reader 2
2012/11/14 20:53:52 8D736E0 r ss [pcsc] PCSC failed establish context (80100006)
2012/11/14 20:53:52 8D736E0 r ss [pcsc] IFD: ERROR: Can't open 2 device
2012/11/14 20:53:52 8D736E0 r ss [pcsc] Cannot open device: 2
2012/11/14 20:53:52 8D736E0 r ss [pcsc] IFD: Opening device 3
2012/11/14 20:53:52 8D736E0 r ss [pcsc] IO: PCSC establish context for PCSC pcsc_reader 3
2012/11/14 20:53:52 8D736E0 r ss [pcsc] PCSC failed establish context (80100006)
2012/11/14 20:53:52 8D736E0 r ss [pcsc] IFD: ERROR: Can't open 3 device
2012/11/14 20:53:52 8D736E0 r ss [pcsc] Cannot open device: 3
2012/11/14 20:53:52 8D736E0 r ss [pcsc] IFD: Opening device 4
2012/11/14 20:53:52 8D736E0 r ss [pcsc] IO: PCSC establish context for PCSC pcsc_reader 4
2012/11/14 20:53:52 8D736E0 r ss [pcsc] PCSC failed establish context (80100006)
2012/11/14 20:53:52 8D736E0 r ss [pcsc] IFD: ERROR: Can't open 4 device
2012/11/14 20:53:52 8D736E0 r ss [pcsc] Cannot open device: 4
2012/11/14 20:22:24 9600848 r data from add_job action=8 client r ss
2012/11/14 20:22:24 9600848 r ss [pcsc] IFD: Opening device 1
2012/11/14 20:22:24 9600848 r ss [pcsc] IO: PCSC establish context for PCSC pcsc_reader 1
2012/11/14 20:22:24 9602738 h HTTP Server listening on port 988
2012/11/14 20:22:24 9600848 r ss [pcsc] IO: PCSC failed listing readers [1] : (8010002e)
2012/11/14 20:22:24 9600848 r ss [pcsc] IFD: ERROR: Can't open 1 device
2012/11/14 20:22:24 9600848 r ss [pcsc] Cannot open device: 1
2012/11/14 20:22:24 9600848 r ss [pcsc] IFD: Opening device 2
2012/11/14 20:22:24 9600848 r ss [pcsc] IO: PCSC establish context for PCSC pcsc_reader 2
2012/11/14 20:22:24 9602738 h HTTP Server listening on port 988
2012/11/14 20:22:24 9600848 r ss [pcsc] IO: PCSC failed listing readers [1] : (8010002e)
2012/11/14 20:22:24 9600848 r ss [pcsc] IFD: ERROR: Can't open 2 device
2012/11/14 20:22:24 9600848 r ss [pcsc] Cannot open device: 2
2012/11/14 20:22:48 917C928 r ss [pcsc] IFD: Opening device 3
2012/11/14 20:22:48 917C928 r ss [pcsc] IO: PCSC establish context for PCSC pcsc_reader 3
2012/11/14 20:22:48 B6B01CB8 h HTTP Server listening on port 988
2012/11/14 20:22:48 917C928 r ss [pcsc] IO: PCSC failed listing readers [1] : (8010002e)
2012/11/14 20:22:48 917C928 r ss [pcsc] IFD: ERROR: Can't open 3 device
2012/11/14 20:22:48 917C928 r ss [pcsc] Cannot open device: 3
2012/11/14 20:22:48 917C928 r ss [pcsc] IFD: Opening device 4
2012/11/14 20:22:48 917C928 r ss [pcsc] IO: PCSC establish context for PCSC pcsc_reader 4
2012/11/14 20:22:48 B6B01CB8 h HTTP Server listening on port 988
2012/11/14 20:22:48 917C928 r ss [pcsc] IO: PCSC failed listing readers [1] : (8010002e)
2012/11/14 20:22:48 917C928 r ss [pcsc] IFD: ERROR: Can't open 4 device
2012/11/14 20:22:48 917C928 r ss [pcsc] Cannot open device:
im using centos 6.3
[root@localhost ~]# yum search opensc-tool
Loaded plugins: fastestmirror, refresh-packagekit, security
Loading mirror speeds from cached hostfile
* base: ftp.dgn.net.tr
* extras: ftp.dgn.net.tr
* rpmforge: ftp.fi.muni.cz
* updates: mirror2.hs-esslingen.de
Warning: No matches found for: opensc-tool
No Matches found
[root@localhost ~]#
[root@localhost ~]# opensc-tool -l
-bash: opensc-tool: no command
2012/11/14 19:51:22 9A29848 r ss [pcsc] IFD: Opening device 002:006
2012/11/14 19:51:22 9A29848 r ss [pcsc] IO: PCSC establish context for PCSC pcsc_reader 002:006
2012/11/14 19:51:22 9A2B740 h HTTP Server listening on port 988
2012/11/14 19:51:22 9A29848 r ss [pcsc] IO: PCSC failed listing readers [1] : (8010002e)
2012/11/14 19:51:22 9A29848 r ss [pcsc] IFD: ERROR: Can't open 002:006 device
2012/11/14 19:51:22 9A29848 r ss [pcsc] Cannot open device: 002:006
which config ?
[reader]
label = bb
protocol = pcsc
device = 0
caid =
boxid =
force_i***** =
ecmwhitelist =
detect = cd
mhz = 600
cardmhz = 357
ident =
group = 1
blockemm-unknown = 1
my oscam reader
sorry my englesh is not very good.
i have centos 6.3 and omnikey 3121 i installed.
pcsc-lite-acr38u.i686
pcsc-lite-acr38u-devel.i686
pcsc-lite.i686
pcsc-lite-devel.i686
pcsc-lite-doc.i686
pcsc-lite-libs.i686
pcsc-lite-openct.i686
[root@localhost ~]# yum install opensc
Loaded plugins: fastestmirror, refresh-packagekit, security
Loading mirror speeds from cached hostfile
* base: ftp.dgn.net.tr
* extras: ftp.dgn.net.tr
* rpmforge: ftp.fi.muni.cz
* updates: centos.intergenia.de
Setting up Install Process
No package opensc available.
Error: Nothing to do
[root@localhost ~]#
[root@localhost ~]# ps -e | grep pcsc
4054 ? 00:00:00 pcscd
[root@localhost ~]#
[root@localhost ~]# service pcscd restart
PC/SC smart card daemon durduruluyor (pcscd): [ OK ]
Starting PC/SC smart card daemon (pcscd): [ OK ]
[root@localhost ~]#
[root@localhost ~]# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 045e:0084 Microsoft Corp. Basic Optical Mouse
Bus 002 Device 006: ID 076b:3021 OmniKey AG CardMan 3121
Bus 002 Device 004: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
Bus 002 Device 005: ID 045e:0752 Microsoft Corp. Wired Keyboard 400
[root@localhost ~]#
nano /etc/init.d/pcscd
exec=/usr/sbin/pcscd
prog=$(basename $exec)
lockfile=/var/lock/subsys/$prog
PCSCD_OPTIONS=
# Source config
if [ -f /etc/sysconfig/pcscd ] ; then
. /etc/sysconfig/pcscd
fi
start() {
echo -n $"Starting PC/SC smart card daemon ($prog): "
/usr/sbin/update-reader.conf && daemon $prog $PCSCD_OPTIONS
retval=$?
echo
[ $retval -eq 0 ] && touch $lockfile
return $retval
}
. /etc/init.d/functions
stop() {
echo -n $"Stopping PC/SC smart card daemon ($prog): "
killproc $prog
retval=$?
echo
[ $retval -eq 0 ] && rm -f $lockfile
return $retval
}
restart() {
my oscam.server
[reader]
label = bb
protocol = pcsc
device = 0
caid =
boxid =
force_i***** =
ecmwhitelist =
detect = cd
mhz = 600
cardmhz = 357
ident =
group = 1
blockemm-unknown = 1
012/11/13 23:16:08 8D4F6E0 r ss [pcsc] IFD: Opening device 0
2012/11/13 23:16:08 8D4F6E0 r ss [pcsc] IO: PCSC establish context for PCSC pcsc_reader 0
2012/11/13 23:16:08 8D4F6E0 r ss [pcsc] IO: PCSC failed listing readers [1] : (8010002e)
2012/11/13 23:16:08 8D4F6E0 r ss [pcsc] IFD: ERROR: Can't open 0 device
2012/11/13 23:16:08 8D4F6E0 r ss [pcsc] Cannot open device: 0
2012/11/13 23:17:08 8D4F6E0 r ss [pcsc] IFD: Opening device 0
2012/11/13 23:17:08 8D4F6E0 r ss [pcsc] IO: PCSC establish context for PCSC pcsc_reader 0
2012/11/13 23:17:08 8D4F6E0 r ss [pcsc] IO: PCSC failed listing readers [1] : (8010002e)
2012/11/13 23:17:08 8D4F6E0 r ss [pcsc] IFD: ERROR: Can't open 0 device
2012/11/13 23:17:08 8D4F6E0 r ss [pcsc] Cannot open device: 0
please help me what is my problem?
thanks regards
