Posts by ns5150

I thought you may of been on to something then with the tone mode, but I actually made a typo as it is already set to tone mode. Is it possible that there is insufficient space on the flash?

ok, my full tuner config is as follows:

Configuration mode: Advanced
SAtellite: 28.2E
LNB: LNB1
Priority: Auto
LOF universal LNB
Voltage Mode: Polarization
Increased Voltage: NO
Tone Mode: NO
DiSEqc Mode: 1.2
Toneburst: None
Commited DiSEqC Command: None
Fast DiSEqC: No
Sequence Repeat: No
Command order: Committed, Toneburst
Uncommited DiSEqC: None
DiSEqC repeats: None
Longitude: 2.897
West
Latitude: 53.398
North
Use usals for this sat: No
Stored Position: 001

that's a good point, my dish location is in full force of any high winds and I get a few so I think there may have been some movement, I have always struggled with USALS. But I don't see how this would cause this issue I am having? as I stated the problem happens without the dish moving and I have a SNR of 90%+ and a BER of 0%. I have tried restarting the cam but that makes no difference. Could it be image related?

sorry, yeah i have a motorized setup. I have been using a dM500s for a good while now with no issue and also a dm800HD which appears to be very similar when setting up the tuner as per the VU+. From memory (away from home at present), it is setup for DiSEqC 1.2 but I would have to check for the other parameters. what can you suggest to check?

This occurs without switching satellites, if it remains on 28.2 then it will happen.

Thanks

Hey Guys,

Need some help, I recently received a VU+ solo and for some reason the signal becomes 0% when switching between channels. A reboot of the unit resolves the issue for 'x' amount of time. I have blackhole 1.7.2 running, anyone else come across this problem.

Cheers!!!!!!!!!