wget -O simplebuild – http://s3.is-by.us/now.sh is also not working what's the alternative link?
Posts by alatas
-
-
Stupid question i'm trying to watch tsmedia from my et7500 without hard drive. It's not possible right? Because I don't have enough space. Which plugin is recommended to use to watch directly from server if you don't have hdd?
-
Where can I find the newly compiled oscam ? /opt/s3 and then?
-
I have installed openatv 5.0 on a Sab Unix Triple can't manage to work Oscam installed the softcam feed but still no luck? How can I solve this problem?
-
I would like to know what the differences are between these. Correct me if I'm wrong but LB white services are working only if you have local cards am I right?
Previously I've had both enabled and less NOK's and time outs. A friend of mine said that I should only enable LB Whitelist Services.I've LB Mode=10 2 local cards (red light and viasat) and 8 peers.
And what about these:
Reopen Invalid:
Force always reopen:I've both enabled is that ok?
-
Why are my messages removed everytime?
- - - Updated - - -
Put each caid in it's own group and use
preferlocalcards = 1
lb_mode = 1Please take a look at my configuration. After changing preferlocalcards I've more lag than before.
-
This thread is a bit confusing buddy, and you have multiple caid's in the same group, this is something I've never done nor would I
In my opinion you need to sort out your setup/configs/groups etc so that means keep reading, we can't help if we don't know what you want to do.
Yes I have 2 locals my bad I didn't say this before, but these locals are almost worthless that's the reason why I didn't mention them. These locals are not watched by many clients.So how should I set my groups?
What I want is having lag free tv watching. Sometimes I have low ecm but lag while another proxy has higher ecm but no lag.
What do you need else I'm able to post more of mt configs?
- - - Updated - - -
I've now set all of the readers (11) in a different group
- - - Updated - - -
Basically if I'm still not clear. I've timeout while having low ecm's on some reader. I want to have my oscam request immediately new ecm when having a time out.
Please at least tell me if it's needed to use lb mode 1 or better to use lb mode 10 or lb mode 0 and is it needed to use preferlocalcards=1
- - - Updated - - -
Will some please confirm my last message?
-
What exactly are you trying to do with the proxies make them get used more or less ,if you add a caid to the proxy it will only clear the caid you give it even if it has multiple caids , you also may in effect filter what you use from proxies this way via caid and groups rather than actual load balancing because this will only balance use /speed etc and not services , you may also add a services list and then from there apply what services will be taken from each proxy , this i think will be the best answer but lot of work with multiple caids , loadbalancing isnt really what you seem to be needing but what sync has said about caids and groups will be the fastest way to filter , services lists more specific
I make already use of oscam. services. I've for each caid sids, provider is empty like this for example.
caid:1843
provider:
srvid:
5354,4657,47973,787 etc etcSo for my situation it's better to disable lb mode?
lb mode=0 or
lb mode=10 which is better then?In reader I've already left caid and ident empty for each only marked the services they provide. Not sure if I need to mark the white list to?
Anyway so I don't need to use lb mode right?
Sometimes I've a reader with lower ecm but it's more laggy than other reader which have higher ecm. Oscam is constantly switching between readers but it's not great to watch something which has lower ecm and more glitching and lag.
This is the reason why I was looking how to solve this with loadbalancing,but I see that I'm wrong. Anyway how can I solve my problem which I've described above.
Thanks very much!
This is my oscam conf what cam I add to this or change?
I'm using a desktop as server.[global]
logfile = /var/log/oscam.log
fallbacktimeout = 1600
unlockparental = 1
nice = -1
maxlogsize = 100
waitforcards = 0
block_same_ip = 0
block_same_name = 0
lb_mode = 1
lb_save = 100[cache]
[cccam]
port = 13000
nodeid = EC0C763910151400
version = 2.3.0
reshare_mode = 1
ignorereshare = 1[webif]
httpport = 15000
httpuser = xxx
httppwd = xxx
httprefresh = 15
httppollrefresh = 10
httphideidleclients = 1
httpallowed = 127.0.0.1,1.1.1.1-244.244.255.255,87.213.234.36,77.169.214.119,82.157.147.190
httposcamlabel = xxxx- - - Updated - - -
I'm currently using 6 groups. So it's eventually better to have each proxy in a different group 1 to 9
I've now some readers in the same group like proxy 1,2 in group 1
proxy 3,4 in group 2
proxy 5 in group 3
proxy 6 in group 4
proxy 7, 8 in group 5
proxy 9 in group 6
- - - Updated - - -
This is my oscam.server
You can see I've 2 local cards redlight and viasat 093e
[reader]
label = redlight
description = Redlight HDTV Elite Fusion / Serial: Reader 250
protocol = smartreader
device = 002:004
smargopatch = 1
autospeed = 0
cacheex_allow_filter = 0
caid = 0500
boxid = D5235B16
boxkey = D5235B16D5235B16
detect = cd
mhz = 534
cardmhz = 600
ident = 0000:043800
group = 1[reader]
label = Server_101
description = CanalDigitaal
protocol = cccam
device =
user =
password =
services = canal_digitaal_nl,!fox_sports_2
lb_whitelist_services = canal_digitaal_nl
inactivitytimeout = 30
group = 2
blockemm-unknown = 1
blockemm-g = 1
cccversion = 2.3.0
cccmaxhops = 0
cccmindown = 1
ccckeepalive = 1
cccreshare = 1
cccreconnect = 1200
audisabled = 1
auprovid = 00006A[reader]
label = Server_102
description = TVVlaanderen, ***=D, ***-E, ***link
protocol = cccam
device =
user =
password =
services = mtv_unlimited,***_link,***_deutchland,***_digital_(uk),tv_vlaanderen
lb_whitelist_services = mtv_unlimited,***_link,***_deutchland,***_digital_(uk),tv_vlaanderen
inactivitytimeout = 30
group = 2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
cccversion = 2.3.0
cccmaxhops = 0
cccmindown = 1
ccckeepalive = 1
cccreshare = 1
cccreconnect = 0
audisabled = 1[reader]
label = Server_101x
description = Canal Digitaal
protocol = cccam
device =
user =
password =
services = canal_digitaal_nl,!fox_sports_2
lb_whitelist_services = canal_digitaal_nl
inactivitytimeout = 30
group = 3
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
cccversion = 2.3.0
cccmaxhops = 0
cccmindown = 1
ccckeepalive = 1
cccreshare = 1
cccreconnect = 700
audisabled = 1
auprovid = 00006A[reader]
label = Server_102x
description = TVVlaanderen, ***=D, ***-E, ***link
protocol = cccam
device =
user =
password =
services = mtv_unlimited,***_link,***_deutchland,***_digital_(uk),tv_vlaanderen
inactivitytimeout = 30
group = 3
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
cccversion = 2.3.0
cccmaxhops = 0
cccmindown = 1
ccckeepalive = 1
cccreshare = 1
cccreconnect = 700
audisabled = 1[reader]
label = Canal Digitaal, 1843
description = Canal Digitaal, 1843
protocol = cccam
device =
user =
password =
services = hd+,canal_digitaal_nl,!fox_sports_2
lb_whitelist_services = hd+,canal_digitaal_nl
inactivitytimeout = 30
group = 2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
cccversion = 2.3.0
cccmaxhops = 2
cccmindown = 1
ccckeepalive = 1
cccreshare = 1
cccreconnect = 1200[reader]
label = Digiturk
description = Digiturk, Canal Digitaal, Tv Vlaanderen
protocol = cccam
device =
user =
password =
services = canal_digitaal_nl,tv_vlaanderen,digiturk
lb_whitelist_services = canal_digitaal_nl,tv_vlaanderen,digiturk
inactivitytimeout = 30
group = 4
blockemm-g = 1
lb_weight = 300
cccversion = 2.3.0
cccmaxhops = 2
cccmindown = 1
ccckeepalive = 1
cccreshare = 3
cccreconnect = 0
auprovid = 0000C0[reader]
label = viasat
description = Viasat 5F6ACB21 - 0 1600834337 4 / Reader 6DCC92F
protocol = smartreader
device = 002:005
smargopatch = 1
caid = 093E
boxid = 0CB666EC
boxkey = 068EA357068EA357
detect = cd
mhz = 534
cardmhz = 369
ident = 093E:000000
group = 7
emmcache = 1,1,0[reader]
label = Multiple Caids
description =
protocol = cccam
device =
user =
password =
services = nc+_(seca),nc+_(conax),nc+_(mix),cyfrowy_polsat,tnk,tnk_-_smart_hd,tnk_hd,orange_polska,cs_link,mtv_unlimited,***_link,***_italia,***_deutchland,canal+_esp,telesat,canalsat,***_digital_(uk),hd+,canal_digitaal_nl,tv_vlaanderen,bis,tntsat,austriasat,srg_ssr,orf_digital,elite_hd_10+,freex_tv,sct_+_penthouse_hd,digiturk
lb_whitelist_services = ***_digital_(uk),canal_digitaal_nl,tv_vlaanderen,digiturk
inactivitytimeout = 30
group = 6
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
cccversion = 2.3.0
cccmaxhops = 2
cccmindown = 1
ccckeepalive = 1
cccreshare = 1[reader]
label = Multiple Caids
description =
protocol = cccam
device =
user =
password =
services = nc+_(seca),nc+_(conax),nc+_(mix),cyfrowy_polsat,tnk,tnk_-_smart_hd,tnk_hd,orange_polska,cs_link,mtv_unlimited,***_link,***_italia,***_deutchland,canal+_esp,telesat,canalsat,***_digital_(uk),hd+,canal_digitaal_nl,tv_vlaanderen,bis,tntsat,austriasat,srg_ssr,orf_digital,elite_hd_10+,freex_tv,sct_+_penthouse_hd,digiturk
inactivitytimeout = 30
group = 5
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
cccversion = 2.3.0
cccmaxhops = 2
cccmindown = 1
ccckeepalive = 1
cccreshare = 1[reader]
label = Multiple Caids
description =
protocol = cccam
device =
user =
password =
services = nc+_(seca),nc+_(conax),nc+_(mix),cyfrowy_polsat,tnk,tnk_-_smart_hd,tnk_hd,orange_polska,cs_link,mtv_unlimited,***_link,***_italia,***_deutchland,canal+_esp,telesat,canalsat,***_digital_(uk),hd+,canal_digitaal_nl,tv_vlaanderen,bis,tntsat,austriasat,srg_ssr,orf_digital,elite_hd_10+,freex_tv,sct_+_penthouse_hd,digiturk
lb_whitelist_services = ***_digital_(uk),canal_digitaal_nl,tv_vlaanderen,digiturk
inactivitytimeout = 30
group = 6
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
cccversion = 2.3.0
cccmaxhops = 2
cccmindown = 1
ccckeepalive = 1
cccreshare = 1What should I change
? -
I've read that multiple times, but I can't find a clear explanation in it to use it with remote proxies only. That's why opened a topic about it. I've searched a lot about this but couldn't find something for my situation. I see some people using lb weight 1000 and the of streambord says max 500.There is a lot of miscommunication. -
what do you mean each caid in own group I have multiple caids in each remote reader. Preferlocalcards=1 I don't have any locals why should I set it on 1 . Anyway thanks for replying
- - - Updated - - -
To make it more clear
From a friend with local cards Proxy 1: Canal Digitaal
From a friend with local cards Proxy 2:
Canal Digitaal backup of proxy 1 with different ipFrom a friend with local cards Proxy 3:
Tv vlaanderen, *** uk, *** de,From a friend with local cards Proxy 4:
Tv vlaanderen, *** uk, *** de backup of proxy 3 different ipFrom a friend with local cards Proxy 5:
Canal Digitaal, HD+ Deutschland 1843Proxy 6:
Digiturk, Canal Digitaal, Tv vlaanderenProxy 7:
Multiple caids from a to zProxy 8:
Multiple caids from a to z
Proxy 9:
multiple caids from a to z
so I have currently all of them at lb weight 100
and I use lb mode 1
preferlocalcards = default.
I make use of oscam services without caid and ident
-
Hello can someone please explain me how to use loadbalancing in oscam server with proxies.
I have in total 9 proxies.
7 of them are containing Canal Digitaal (2 of them are having local cards from a friend)
all of the others are having multiple caids (2 of them are having local cards only from a friend)I'm using lb mode 1
I have all of the reader at lb weight 100
and I make use of oscam.servicesthank you
I've read a lot but I can't find anything how to use loadbalancing with proxies.
-
[global]
logfile = /var/log/oscam.log
fallbacktimeout = 1600
unlockparental = 1
nice = -1
maxlogsize = 100
waitforcards = 0
block_same_ip = 0
block_same_name = 0
lb_mode = 1
lb_save = 100I have 2 local cards lb weight 100.
4 proxies from friend server lb weight 500 mainly Canal Digitaal.
4 proxies from others lb weight.Before the lb_mode was 10. I've changed it to 1 is this better? I've 4 proxies with a lot of caids.
I have global config oscam 0 local cards like proxied. Is it better to switch this to 1 or 2?
Please can someone help me I'm a newbie with oscam and stuff.