Posts by giorbak

Easy way to clean "config" file without restart enigma.

Do not try to update the plug-in with FTP.

Try to update it from the plug-in itself by selecting the menu items "actualization Zoom" and "confirm the update" .

It will uninstall and install it again, even if the servers have not been changed.

ziko, as I notice, the localized strings are too large to fit in the plugin's main window.

I changed them with other smaller ones. Please finally use this file before releasing the plugin.

Thanks

Re: Greek translation.

Please use this file instead of my previous one.

I made some small changes and will revert if the strings do not fit in the GUI.

Thank you.

Greek translation.

I just installed it and it boots normally.

Τα νέα service references για Στερεά Ελλάδα

With a little difficulty.

Some channels open easily, some others not at all.

Quote from balkanac

Has anyone tried this plugin in older devices?

For example on DM800SE?

Is it installed and works?

On DM800se - OK

Can you swap buttons "Account info" and "Portals" to make it easier to switch from "Portals" to "Live TV"?

Τα picons της Θεσσαλίας.

Θα ανεβάσω και της Κεντρικής Ελλάδας όταν αλλάξουν.

I already installed openpli-8 in the above way as external image to usb stick (whole and not divided), using openmultiboot or multiminiboot.

The image works normally, but I don't have a network connection, either with LAN or WLAN.

I do not know if it is worth dealing with this image because it has no network connection.

I couldn't connect to the internet (even with cable).

But if you want to install it on usb/hdd, there is an easier way than the above

(the image is divided into two parts so that it can be extended to flash and usb/hdd).

1. Download "OpenPLi-enigma2-r8-bartoma55-dm800se-sim2-ssl84D.zip" and unzip it.

2. Copy the file "openpli-enigma2-r8-bartoma55-dm800se-sim2-ssl84D.sh" to the Linux OS and run it.

You'll get "openvision.zip." Open it, it contains the .sh and .tar files.

3. Install "openpli-enigma2-r8-bartoma55-dm800se-sim2-ssl84D.nfi" as usual.

4. Before rebooting, go to the openpli image and delete the following symlinks (shortcuts):

share (usr/), enigma2 (usr/lib/) and python2.7 (usr/lib/).

5. Open "openpli-enigma2-r8-bartoma55-dm800se-save.tar.gz" and copy the folders that contains

in the appropriate places.

You have to install "uudecode" which is in the package "sharutils".

To install this, open a console and type this command:

sudo apt-get install sharutils

It also works with MultiMiniBoot.

Απενεργοποίησε τις εντολές "Επαναλήψεις DiSEqC 1.1" και "Επανάληψη ακολουθίας εντολών"

These drivers are not compatible with Neutrino.

I tried following commands with Telnet:

opkg update

opkg install kernel-module-r8712u

opkg install firmware-rtl8712u

reboot

Modules 3.9.6 have been installed that contain Wlan driver, but in the menu I have no choice for WLAN.

Maybe I'm doing something wrong. I'll try it again.

Network is OK with Ethernet, but there is no wi-fi.

How do I enable WLAN driver (rtl8712u)?

Μenu item "Settings > Extened Settings > Kernel Options" is missing.

In the Receiver Bios you must set the boot order to start the usb before the internal flash.

Read first post, paragraph 4.

-- Make your receiver (dm800se sim2) to boot from usb --.

Click on the link to get detailed instructions on how to do it (Bios configuration - DM 800HD se):

Primary boot source: usb [/autoexec_dm800se.bat]

Secondary boot source: flash

Enable USB support: [ENABLED]

Yes.