My friends
openvision-enigma2-develop-extralanguage-gstreamer-10.1-r176-spark 7162_usb.zip
Posts by ahmed gazye
-
-
My friends
openvision-enigma2-develop-extralanguage-gstreamer-10.1-r176-spark_usb.zip
-
Could it work with teamblue-6.4-gbquadplus or openvix 5.3.0.35 as flash images? Thank you.
It is better for the plugin to work through its own version, and this will provide you with the possibility to make the plugin in a good way, and you can install what you like on the external flash. The topic is dedicated to devices that are not supported by these teams, and then they have no plugin to work to install copies on the external flash
-
Each of the team opendroid & opennfr that supports your device All you need is to install one of the two versions on your device and use plugin In it These are the links of the download pages for your device. Download what you love and work with the plugin through the copy
https://opendroid.org/7.0/GigaBlue/
-
What is the type of your receiver
-
-
-
dear Bubele
First, I am not a developer, but I am a user
A developer named mino6060 with some friends with him
This is my expectation and the opinion of the person, not the opinion of the developer. I think that it is premature because the teams have not yet developed their copies except for a team openatv
It is still in the beginning of work and takes time for the new version to stabilize to at least the beginning of the new year
Then each event will have a talk
-
-
-
code works to install freeserver on openatv 6.4.from tmp
Ipk file install command
Code:
opkg update
opkg install /tmp/*.ipk
for vusolo2 e2 mips openatv 6.4 full code please,thanks
-
code works to install freeserver on openatv 6.4.from tmp
Ipk file install command
Code:
opkg update
opkg install /tmp/*.ipk
Deb install command
Code:
apt-get update
dpkg -i --force-overwrite /tmp/*.deb
apt-get install --force-yes -f -y
killall enigma2-9
what code works to install freeserver on openatv 6.4. it wont install from sat venus panel or from tmp
-
hd51-tests/ax51_mutant51_BS-DDT-rev1882_HAL-rev1612_NMP-rev13020_NewLayout_swap_multi_usb.zip & multi_usb.zip & ofg tgz _22.04.2020
I do not own the device, but I brought the version for someone who would like to try, so I couldn't help anyone with the setup problems.
Download page
http://dual.franken.bplaced.de/
-
BPanther Administrator
-> OK
-> UNTESTED (automatically built)
-> DEFECTIVE (changes still necessary)Basically:
FLASH -> Flash image for the start from the flash. Write to flash with USB stick.
USB -> Image for starting from a USB stick. Tar.gz is installed on the USB stick with the MBI (MAXI Boot Installer), for example.
EXCEPTION HD51 / ZGEMMA H7 / Bre2ze 4K
FLASH -> Flash image for the start from the flash, intended for an offline update. The content is copied to the box after / tmp and can then be flashed via the Extras menu.
USB -> flash image for starting from flash. Write to flash with USB stick.
MULTI -> Contains the files from Flash + USB in one package.
EXCEPTION VU + DUO 4K / VU + UNO 4K SE / VU + ZERO 4K / VU + ULTIMO 4K / VU + UNO 4K / VU + SOLO 4K
FLASH -> Flash image for the start from the flash, intended for an offline update. The content is copied to / tmp on the box, renamed to kernelX.bin and rootfsX.tar.bz2 (X = partition) and can then be flashed using the Tools menu.
USB -> Contains the files for flashing from the USB stick - SingleBoot.
MULTI -> Contains the files for flashing from the USB stick - MultiBoot.
There are only MultiBoot images for VU + DUO 4K, VU + UNO 4K SE, VU + ZERO 4K, VU + ULTIMO 4K, VU + UNO 4K and VU + SOLO 4K available for FLASH and MULTI. The file names are changed slightly accordingly.
EXCEPTION VU + DUO
FLASH -> Currently not available.
USB -> Contains the files for flashing from the USB stick, but also suitable for an offline update. To do this, copy the content to / tmp on the box and flash it using the Tools menu.
MULTI -> Currently not available.
NOTE on the loader of the HD51 / ZGEMMA H7 / Bre2ze 4K and VU +
The loader version can be queried in Telnet as follows: cat / sys / firmware / devicetree / base / bolt / tag
The update is available for as at 12/07/2020
https://vuuno4k.mbremer.de/FLASH/
-
BPanther Administrator -> OK -> UNTESTED (automatically built) -> DEFECTIVE (changes still necessary)
Basically:
FLASH -> Flash image for the start from the flash. Write to flash with USB stick.
USB -> Image for starting from a USB stick. Tar.gz is installed on the USB stick with the MBI (MAXI Boot Installer), for example.
EXCEPTION HD51 / ZGEMMA H7 / Bre2ze 4K
FLASH -> Flash image for the start from the flash, intended for an offline update. The content is copied to the box after / tmp and can then be flashed via the Extras menu.
USB -> flash image for starting from flash. Write to flash with USB stick.
MULTI -> Contains the files from Flash + USB in one package.
EXCEPTION VU + DUO 4K / VU + UNO 4K SE / VU + ZERO 4K / VU + ULTIMO 4K / VU + UNO 4K / VU + SOLO 4K
FLASH -> Flash image for the start from the flash, intended for an offline update. The content is copied to / tmp on the box, renamed to kernelX.bin and rootfsX.tar.bz2 (X = partition) and can then be flashed using the Tools menu.
USB -> Contains the files for flashing from the USB stick - SingleBoot.
MULTI -> Contains the files for flashing from the USB stick - MultiBoot.
There are only MultiBoot images for VU + DUO 4K, VU + UNO 4K SE, VU + ZERO 4K, VU + ULTIMO 4K, VU + UNO 4K and VU + SOLO 4K available for FLASH and MULTI. The file names are changed slightly accordingly.
EXCEPTION VU + DUO
FLASH -> Currently not available.
USB -> Contains the files for flashing from the USB stick, but also suitable for an offline update. To do this, copy the content to / tmp on the box and flash it using the Tools menu.
MULTI -> Currently not available.
NOTE on the loader of the HD51 / ZGEMMA H7 / Bre2ze 4K and VU +
The loader version can be queried in Telnet as follows: cat / sys / firmware / devicetree / base / bolt / tag
The update is available for as at 12/07/2020
https://vuuno4kse.mbremer.de/FLASH/
-
BPanther Administrator -> OK -> UNTESTED (automatically built) -> DEFECTIVE (changes still necessary)
Basically:
FLASH -> Flash image for the start from the flash. Write to flash with USB stick.
USB -> Image for starting from a USB stick. Tar.gz is installed on the USB stick with the MBI (MAXI Boot Installer), for example.
EXCEPTION HD51 / ZGEMMA H7 / Bre2ze 4K
FLASH -> Flash image for the start from the flash, intended for an offline update. The content is copied to the box after / tmp and can then be flashed via the Extras menu.
USB -> flash image for starting from flash. Write to flash with USB stick.
MULTI -> Contains the files from Flash + USB in one package.
EXCEPTION VU + DUO 4K / VU + UNO 4K SE / VU + ZERO 4K / VU + ULTIMO 4K / VU + UNO 4K / VU + SOLO 4K
FLASH -> Flash image for the start from the flash, intended for an offline update. The content is copied to / tmp on the box, renamed to kernelX.bin and rootfsX.tar.bz2 (X = partition) and can then be flashed using the Tools menu.
USB -> Contains the files for flashing from the USB stick - SingleBoot.
MULTI -> Contains the files for flashing from the USB stick - MultiBoot.
There are only MultiBoot images for VU + DUO 4K, VU + UNO 4K SE, VU + ZERO 4K, VU + ULTIMO 4K, VU + UNO 4K and VU + SOLO 4K available for FLASH and MULTI. The file names are changed slightly accordingly.
EXCEPTION VU + DUO
FLASH -> Currently not available.
USB -> Contains the files for flashing from the USB stick, but also suitable for an offline update. To do this, copy the content to / tmp on the box and flash it using the Tools menu.
MULTI -> Currently not available.
NOTE on the loader of the HD51 / ZGEMMA H7 / Bre2ze 4K and VU +
The loader version can be queried in Telnet as follows: cat / sys / firmware / devicetree / base / bolt / tag
The update is available for as at 12/07/2020
https://vusolo4k.mbremer.de/FLASH/
-
BPanther Administrator -> OK -> UNTESTED (automatically built) -> DEFECTIVE (changes still necessary)
Basically:
FLASH -> Flash image for the start from the flash. Write to flash with USB stick.
USB -> Image for starting from a USB stick. Tar.gz is installed on the USB stick with the MBI (MAXI Boot Installer), for example.
EXCEPTION HD51 / ZGEMMA H7 / Bre2ze 4K
FLASH -> Flash image for the start from the flash, intended for an offline update. The content is copied to the box after / tmp and can then be flashed via the Extras menu.
USB -> flash image for starting from flash. Write to flash with USB stick.
MULTI -> Contains the files from Flash + USB in one package.
EXCEPTION VU + DUO 4K / VU + UNO 4K SE / VU + ZERO 4K / VU + ULTIMO 4K / VU + UNO 4K / VU + SOLO 4K
FLASH -> Flash image for the start from the flash, intended for an offline update. The content is copied to / tmp on the box, renamed to kernelX.bin and rootfsX.tar.bz2 (X = partition) and can then be flashed using the Tools menu.
USB -> Contains the files for flashing from the USB stick - SingleBoot.
MULTI -> Contains the files for flashing from the USB stick - MultiBoot.
There are only MultiBoot images for VU + DUO 4K, VU + UNO 4K SE, VU + ZERO 4K, VU + ULTIMO 4K, VU + UNO 4K and VU + SOLO 4K available for FLASH and MULTI. The file names are changed slightly accordingly.
EXCEPTION VU + DUO
FLASH -> Currently not available.
USB -> Contains the files for flashing from the USB stick, but also suitable for an offline update. To do this, copy the content to / tmp on the box and flash it using the Tools menu.
MULTI -> Currently not available.
NOTE on the loader of the HD51 / ZGEMMA H7 / Bre2ze 4K and VU +
The loader version can be queried in Telnet as follows: cat / sys / firmware / devicetree / base / bolt / tag
The update is available for as at 12/07/2020
https://vuultimo4k.mbremer.de/FLASH/
-
BPanther Administrator -> OK -> UNTESTED (automatically built) -> DEFECTIVE (changes still necessary)
Basically:
FLASH -> Flash image for the start from the flash. Write to flash with USB stick.
USB -> Image for starting from a USB stick. Tar.gz is installed on the USB stick with the MBI (MAXI Boot Installer), for example.
EXCEPTION HD51 / ZGEMMA H7 / Bre2ze 4K
FLASH -> Flash image for the start from the flash, intended for an offline update. The content is copied to the box after / tmp and can then be flashed via the Extras menu.
USB -> flash image for starting from flash. Write to flash with USB stick.
MULTI -> Contains the files from Flash + USB in one package.
EXCEPTION VU + DUO 4K / VU + UNO 4K SE / VU + ZERO 4K / VU + ULTIMO 4K / VU + UNO 4K / VU + SOLO 4K
FLASH -> Flash image for the start from the flash, intended for an offline update. The content is copied to / tmp on the box, renamed to kernelX.bin and rootfsX.tar.bz2 (X = partition) and can then be flashed using the Tools menu.
USB -> Contains the files for flashing from the USB stick - SingleBoot.
MULTI -> Contains the files for flashing from the USB stick - MultiBoot.
There are only MultiBoot images for VU + DUO 4K, VU + UNO 4K SE, VU + ZERO 4K, VU + ULTIMO 4K, VU + UNO 4K and VU + SOLO 4K available for FLASH and MULTI. The file names are changed slightly accordingly.
EXCEPTION VU + DUO
FLASH -> Currently not available.
USB -> Contains the files for flashing from the USB stick, but also suitable for an offline update. To do this, copy the content to / tmp on the box and flash it using the Tools menu.
MULTI -> Currently not available.
NOTE on the loader of the HD51 / ZGEMMA H7 / Bre2ze 4K and VU +
The loader version can be queried in Telnet as follows: cat / sys / firmware / devicetree / base / bolt / tag
The update is available for as at 12/07/2020
https://vuzero4k.mbremer.de/FLASH/
-
BPanther Administrator -> OK -> UNTESTED (automatically built) -> DEFECTIVE (changes still necessary)
Basically:
FLASH -> Flash image for the start from the flash. Write to flash with USB stick.
USB -> Image for starting from a USB stick. Tar.gz is installed on the USB stick with the MBI (MAXI Boot Installer), for example.
EXCEPTION HD51 / ZGEMMA H7 / Bre2ze 4K
FLASH -> Flash image for the start from the flash, intended for an offline update. The content is copied to the box after / tmp and can then be flashed via the Extras menu.
USB -> flash image for starting from flash. Write to flash with USB stick.
MULTI -> Contains the files from Flash + USB in one package.
EXCEPTION VU + DUO 4K / VU + UNO 4K SE / VU + ZERO 4K / VU + ULTIMO 4K / VU + UNO 4K / VU + SOLO 4K
FLASH -> Flash image for the start from the flash, intended for an offline update. The content is copied to / tmp on the box, renamed to kernelX.bin and rootfsX.tar.bz2 (X = partition) and can then be flashed using the Tools menu.
USB -> Contains the files for flashing from the USB stick - SingleBoot.
MULTI -> Contains the files for flashing from the USB stick - MultiBoot.
There are only MultiBoot images for VU + DUO 4K, VU + UNO 4K SE, VU + ZERO 4K, VU + ULTIMO 4K, VU + UNO 4K and VU + SOLO 4K available for FLASH and MULTI. The file names are changed slightly accordingly.
EXCEPTION VU + DUO
FLASH -> Currently not available.
USB -> Contains the files for flashing from the USB stick, but also suitable for an offline update. To do this, copy the content to / tmp on the box and flash it using the Tools menu.
MULTI -> Currently not available.
NOTE on the loader of the HD51 / ZGEMMA H7 / Bre2ze 4K and VU +
The loader version can be queried in Telnet as follows: cat / sys / firmware / devicetree / base / bolt / tag
The update is available for as at 12/07/2020
-
BPanther Administrator -> OK -> UNTESTED (automatically built) -> DEFECTIVE (changes still necessary)
Basically:
FLASH -> Flash image for the start from the flash. Write to flash with USB stick.
USB -> Image for starting from a USB stick. Tar.gz is installed on the USB stick with the MBI (MAXI Boot Installer), for example.
EXCEPTION HD51 / ZGEMMA H7 / Bre2ze 4K
FLASH -> Flash image for the start from the flash, intended for an offline update. The content is copied to the box after / tmp and can then be flashed via the Extras menu.
USB -> flash image for starting from flash. Write to flash with USB stick.
MULTI -> Contains the files from Flash + USB in one package.
EXCEPTION VU + DUO 4K / VU + UNO 4K SE / VU + ZERO 4K / VU + ULTIMO 4K / VU + UNO 4K / VU + SOLO 4K
FLASH -> Flash image for the start from the flash, intended for an offline update. The content is copied to / tmp on the box, renamed to kernelX.bin and rootfsX.tar.bz2 (X = partition) and can then be flashed using the Tools menu.
USB -> Contains the files for flashing from the USB stick - SingleBoot.
MULTI -> Contains the files for flashing from the USB stick - MultiBoot.
There are only MultiBoot images for VU + DUO 4K, VU + UNO 4K SE, VU + ZERO 4K, VU + ULTIMO 4K, VU + UNO 4K and VU + SOLO 4K available for FLASH and MULTI. The file names are changed slightly accordingly.
EXCEPTION VU + DUO
FLASH -> Currently not available.
USB -> Contains the files for flashing from the USB stick, but also suitable for an offline update. To do this, copy the content to / tmp on the box and flash it using the Tools menu.
MULTI -> Currently not available.
NOTE on the loader of the HD51 / ZGEMMA H7 / Bre2ze 4K and VU +
The loader version can be queried in Telnet as follows: cat / sys / firmware / devicetree / base / bolt / tag
The update is available for as at 12/07/2020
https://vuduo4k.mbremer.de/FLASH/
