Posts by ahmed gazye
-
-
My friend / sergio60
How does it not work and was working before What is the error message that appears to you
Did you update the version of Enigma?
Or you install a new plugin or change the skins you were using previously
Without the error message, we do not know its causes and treatment
-
My friends
new Spark devices sti7111 for amiko8900-PurE2-6.5 for test as at 21/3/2020
Download from official website ...
http://www.pur-e2.club/OU/images/index.php?dir=6.5/fulan/
Good luck
-
My friends
new Spark devices sti7162 for amikoalien-PurE2-6.5 for test as at 21/3/2020
Download from official website ...
http://www.pur-e2.club/OU/images/index.php?dir=6.5/fulan/
Good luck
-
My friend / orion_bilo
I do not own the device, but I have transferred the copy to you those who like the experience, and this is an update of the previous version on the above and the team’s page on the following topic, the way to download from the team page
You can view it and contact the team if you have a note
BPanther Administrator
-> OK
-> UNTESTED (automatically built)
-> DEFECTIVE (changes still necessary)Basically:
FLASH -> Flash image for the start from the flash. Write to flash with USB stick.
USB -> Image for starting from a USB stick. Tar.gz is installed on the USB stick with the MBI (MAXI Boot Installer), for example.
EXCEPTION HD51 / ZGEMMA H7 / Bre2ze 4K
FLASH -> Flash image for the start from the flash, intended for an offline update. The content is copied to the box after / tmp and can then be flashed via the Extras menu.
USB -> flash image for starting from flash. Write to flash with USB stick.
MULTI -> Contains the files from Flash + USB in one package.
EXCEPTION VU + DUO 4K / VU + UNO 4K SE / VU + ZERO 4K / VU + ULTIMO 4K / VU + UNO 4K / VU + SOLO 4K
FLASH -> Flash image for the start from the flash, intended for an offline update. The content is copied to / tmp on the box, renamed to kernelX.bin and rootfsX.tar.bz2 (X = partition) and can then be flashed using the Tools menu.
USB -> Contains the files for flashing from the USB stick - SingleBoot.
MULTI -> Contains the files for flashing from the USB stick - MultiBoot.
There are only MultiBoot images for VU + DUO 4K, VU + UNO 4K SE, VU + ZERO 4K, VU + ULTIMO 4K, VU + UNO 4K and VU + SOLO 4K available for FLASH and MULTI. The file names are changed slightly accordingly.
EXCEPTION VU + DUO
FLASH -> Currently not available.
USB -> Contains the files for flashing from the USB stick, but also suitable for an offline update. To do this, copy the content to / tmp on the box and flash it using the Tools menu.
MULTI -> Currently not available.
NOTE on the loader of the HD51 / ZGEMMA H7 / Bre2ze 4K and VU +
The loader version can be queried in Telnet as follows: cat / sys / firmware / devicetree / base / bolt / tag
-
My friend / mika
I do not own the device, but I have transferred the copy to you those who like the experience, and this is an update of the previous version on the above and the team’s page on the following topic, the way to download from the team page
You can view it and contact the team if you have a note
BPanther Administrator -> OK -> UNTESTED (automatically built) -> DEFECTIVE (changes still necessary)Basically:
FLASH -> Flash image for the start from the flash. Write to flash with USB stick.
USB -> Image for starting from a USB stick. Tar.gz is installed on the USB stick with the MBI (MAXI Boot Installer), for example.
EXCEPTION HD51 / ZGEMMA H7 / Bre2ze 4K
FLASH -> Flash image for the start from the flash, intended for an offline update. The content is copied to the box after / tmp and can then be flashed via the Extras menu.
USB -> flash image for starting from flash. Write to flash with USB stick.
MULTI -> Contains the files from Flash + USB in one package.
EXCEPTION VU + DUO 4K / VU + UNO 4K SE / VU + ZERO 4K / VU + ULTIMO 4K / VU + UNO 4K / VU + SOLO 4K
FLASH -> Flash image for the start from the flash, intended for an offline update. The content is copied to / tmp on the box, renamed to kernelX.bin and rootfsX.tar.bz2 (X = partition) and can then be flashed using the Tools menu.
USB -> Contains the files for flashing from the USB stick - SingleBoot.
MULTI -> Contains the files for flashing from the USB stick - MultiBoot.
There are only MultiBoot images for VU + DUO 4K, VU + UNO 4K SE, VU + ZERO 4K, VU + ULTIMO 4K, VU + UNO 4K and VU + SOLO 4K available for FLASH and MULTI. The file names are changed slightly accordingly.
EXCEPTION VU + DUO
FLASH -> Currently not available.
USB -> Contains the files for flashing from the USB stick, but also suitable for an offline update. To do this, copy the content to / tmp on the box and flash it using the Tools menu.
MULTI -> Currently not available.
NOTE on the loader of the HD51 / ZGEMMA H7 / Bre2ze 4K and VU +
The loader version can be queried in Telnet as follows: cat / sys / firmware / devicetree / base / bolt / tag
-
my friends
Please note that the program installs versions with the extension tar.gz For external flash& zip For internal flash
The backup is also created with the same extension tar.gz For external flash& IMG image For internal flash
-
ChipGenius_v4_19_0319 to definitions data of usb Wireless lan card & some Drivers Wireless enigma2 system in Spark devices
First of all, most important information you should be aware of is your data of usb Wireless lan card
I offer you a wonderful program that is easy and simple to identify this data
ChipGenius_v4_19_0319
All you do is connect usb Wireless lan card to the computer, open the program, and it shows you all the required dat
After you know the data of usb Wireless lan card
You should search for and save their drivers on the computer and add them to the versions of the enigma2 that are not available
Attachments are some popular definitions
1 - The definitions with extension ipk are installed The known way
2 - Compressed files after unzip them, transfer them bu the DCC programTo the extension
etc > Wireless
gave him the permit 755
3 - Compressed files named Wireless.ko after unzip them, transfer them bu the DCC programTo the extension
lib> modules1>2.6.32.61- stm24-.217>kernel>drivers>net>Wireless
gave him the permit 755
then restart the device
-
-
-
-
-
-
-
-
The update is available for today 19/3/2020
-
My friend / Octa8on
With attachments 3 boxbranding from version opennfr-6.4 in spark path
usr/lib/enigma2/python
-
explanation STB_Admin_Tool_Morly v2.4.4.1 One of the best programs for creating a multi-boot & more through Windows system
Revival of the old beautiful programs
First of all, we thank the developer Morly of plugin for this wonderful work
Yes, it is there are some programs to do this, but sometimes it does not work good and needs some experience,
but programs offer you a simple and easy way for creating a multi-boot & more through Windows systemThis is the latest version of the program -STB_Admin_Tool_Morly v2.4.4.1- through Windows system Complete contains dll missing files
as the developer stopped issuing new releases, and a team also stopped issuing copies due to the passage of financial hardship,
we hope to return quickly to his previous era, as he provides us with wonderful copies
These are the devices that the program supports
With attachments you will find the program STB_Admin_Tool_Morly v2.4.4.1 After decompressing it, you will find the program Complete contains dll missing files as shown in the double-click on the icon, and it will open
The program settings will be done as shown in the picture You will make the program settings as you see
ip recever / user Copy it that you are working on / password Copy it that you are working on / connect
If the flash is divided before working on the program, as in this case, this drop-down menu will appear to you to choose where to install the program on the flash, which is, of course, the lunux Swab Partition for Flash
The program will open for you, wait until all the functions of the program are loaded, until all jobs appear in green at the bottom of the program
The job download for the program is complete, and the jobs appear below the program, all in green You can now work on any job you want in the program Which appears to you on the north of the program
These are the functions of the program
Welcome : Shows program data and functions It displays program data and functions and enables you to make program settings
flsha : 1 - Let you The version files you are working on Install, move or erase whatever you want from it
2 - flash tool
3 - backup tool
Disk / mb : With it, you can divide the flash from 1 to 14 Partition equal parts You can also view the contents of the flash, install copies, and make a backup1 - manage partions
Settings as shown in the picture You will be shown all the flash on the flash and the names of copies installed on it & mount for it
2 - partions editor
divide the flash from 1 to 14 Partition equal parts
Choose the number of copies as you like, then mouse click on the green check mark
After the end of divide the flash should
You have to choose one partition to be the Partition Swap, prefer the first or last as you like until it is clear
3 - image install wizard
image install
Or image install
Stand on partions If you want to install the version of the mouse click, you will be presented with a drop-down list chosen
plugins : To install or delete plugins Or Driver
Channel List Editor: For adjustment to channels, by adding and removing
cont-man: Restore data from an archive
bootargs : booting To copy in the flash In two ways
logging : To delete or add
Telnet : To write and execute commands as Linux
box states : Device data and the version that you are working on
-
-
My friend / aa7590
What's new?
if problem in hyperterminal Still there, you can download another version of the program and try again
If the problem is not solved, you should go to a specialized technician to recharge the internal flash with a file u-boot through the JTAG because he has the expertise and he have tools to do
