Davidant had shared it on the Tunisia satellite forum. I couldn't download it today because I wasn't registered. Is this prepared file new? ahmed :)
My friend, the libreader file
Posts by ahmed gazye
-
-
-
This is Special diligence from davidant Thank you for this support For those who like to try
Good luck everyone
-
Hello friend, OSCAM Works Card with CryptoGuard
I do not own the card and have not tried it, and I think it depends OSCAM Settings You can try it or refer to the OSCAM team here
-
513323684.gif
I read this on another site from alkap who modified image SUNGATE TITAN that caused the problems
He is also a member of our forum
Linuxsat VIP
All that happened is that I did not adjust the serial in the image because it does not have powerful IP TV applications such as Spider and Gazelle (I did not pay much attention to it), so they were able to real serial for the device.I will also modified image of SUNGATE TITAN 4K that hit SN, modified again, and I will also challenge the SUNGATE team to attack my device.
Based on the above it was hit by erasing SN sf8008 device From a team SUNGATE or Chinese IPTV platform
-
Good evening you have to take which one for an ultimo 4k, and how to install it since I don't .IPK because I am not very strong thank you
Go For this topic in the forum
-
Try images/sf8008/openeight-6.8-sf8008-20240522_recovery_emmc.zip
-
this image wifi 5370 drever
No go to this forum topic to obtain wifi 5370 drever
ChipGenius_v4_19_0319 to definitions data of usb Wireless lan card & some Drivers Wireless enigma2 system in Spark devices
First of all, most important information you should be aware of is your data of usb Wireless lan card
I offer you a wonderful program that is easy and simple to identify this data
ChipGenius_v4_19_0319
All you do is connect usb Wireless lan card to the computer, open the program, and it shows you all the required dat
linuxsat-support.com/cms/attachment/139535/
After you know the… -
OSCam 11845 EMU 802 - 09/10/2024
Compiled by ME
Weekly release
Oct 09, 2024
oscam-git11845-802@44d9b86c- oscam patched
OsCam Changelogs
Fix build error with non C99 capable toolchains
for armv7 devices (bin only) openssl 3.3.2
new openatv 7.4 /7.5 , pure2 7.4 ,EGAMI 10.5 , OpenBh 5.4.1 , opendroid-7.5, openspa-8.4.001
openssl 3.3.2 +libusb1.0.27+ Lpcsc lite2.2.3+ libdvbcsa 1.1.0.32-1.1.0.64-1.1.0-128 & lib curl 8.10.1+libzlib1.3.1-emu- icam-neon-upx
oscam-git11845-802@44d9b86c-armv7_generic-webif-dvbapi-ssl-libusb-pcsc-libdvbcsa-emu-icam-neon-upx-signed
openssl 3.3.2 +libusb1.0.27+ Lpcsc lite2.2.3+libdvbcsa 1.1.0.32 + lib curl 8.10.1+libzlib1.3.1-emu- neon-upx
oscam-git11845-802@44d9b86c-armv7_generic-webif-dvbapi-ssl-libusb-pcsc-emu-neon-upx-signed
for armv7 devices (bin only)
For py2 & py3 &gx
openssl 1.1.1w +libusb1.0.27+ Lpcsc lite2.2.3+libdvbcsa 1.1.0.32-1.1.0.64-1.1.0-128 + lib curl 8.10.1+libzlib1.3.1-emu- icam-neon-upx
oscam-git11845-802@44d9b86c-armv7_generic-webif-dvbapi-ssl-libusb-pcsc-libdvbcsa-emu-icam-neon-upx-signed 2
openssl 1.1.1w + lib curl 8.10.1+libusb1.0.27+libzlib1.3.1-emu-upx
oscam-git11845-802@44d9b86c-armv7_generic-webif-dvbapi-ssl-libusb-emu-upx-signed
also working on Octagon SF8008 with Define OS Just change the name to oscam-gx
Transfer it via DCC or FileZilla Client To the extension usr/local/bin
You will find it after changing the name in the attachments
for sh4 devices (bin only)
openssl 1.1.1w& libdvbcsa 1.1.0.32& Lpcsc lite1.9.5& libusb 1.0.27 & libzlib1.3.1+ lib curl 8.10.1- emu-icam-upx
oscam-git11845-802@44d9b86c-sh4_generic-webif-dvbapi-ssl-libusb-pcsc-libdvbcsa-emu-icam-upx-signed
Good luck everyone
-
openatv-7.5-sf8008 06/10/2024
Important update
gcc 14.2
glibc 2.40
python3 3.12.6
openssl 3.3.1
G streamer 1.24.8
1_0_1_1B5B_17_6E_DCA0000_0_0_0_20241009041026.jpg
-
Try This is first there is a small button on the back that does the same job Recovery
called / Recovery (Reset)
Turn off the device from the power button, press the button Recovery (Reset) as in the picture. Turn on the device from the power button and continue pressing the button Recovery (Reset) for For some time .
This process is supposed to return the device as new as if it had never been used beforeTry this secondly if it doesn't work first installing openatv-7.4-sf8008-20241008_recovery_emmc.zip
You must unzip the copy and load it to usb load it to the device and enter the recovery flash recovery image
-
Your problem is that you uploaded a modified image to another device ( sungate ) on your device sf8008. Try first Erase all of your device with Hitool Then pass The original Full-dump sf8008
This dump is in a forum topic by one of the members najdine at the following link
Hitool Full dump sf8008-twin and supreme
(openatv-7.5 - 20240914 python: 3.12.5)
https://www.mediafire.com/file…l-dump-by-TBs-tn.rar/file
Or on the following link also from najdine
https://www.mediafire.com/file/pae0...-20240925-Hitool-Full-dump-by-TBs-tn.rar/file
Go to this topic to benefit from the explanation
linuxsat-support.com/cms/attachment/182532/
How to solve the problem of OCTAGON SF8008 stuck on BOOT by yourself?
A thousand thanks to the wonderful / Electro Yassine
The audio is in Arabic to / Yassine
youtube.com/watch?v=faz1KCRQ4e…D8%A7%D8%AAELECTROYASSINE
links Tools
https://www.mediafire.com/file…HiTool-STB-5.0.8.zip/file
https://mega.nz/file/x3RzECQb#…qUFHjKB1CeXWmIrTRhrx3ME1s
https://www.mediafire.com/file…tb48jro/PL2303GT.rar/file
Same explanation for the same topic from the forum openspa … -
-
Your problem is that you uploaded a modified image to another device ( sungate ) on your device sf8008. Try first Erase all of your device with Hitool Then pass The original Full-dump sf8008
This dump is in a forum topic by one of the members najdine at the following link
Hitool Full dump sf8008-twin and supreme(openatv-7.5 - 20240914 python: 3.12.5)
https://www.mediafire.com/file…l-dump-by-TBs-tn.rar/file
Or on the following link also from najdine
https://www.mediafire.com/file/pae0...-20240925-Hitool-Full-dump-by-TBs-tn.rar/file
-
OSCam 11839 EMU 802 - 03/10/2024
Compiled by ME
Weekly release
Oct 03, 2024
oscam-git11839-802@178662a1- oscam patched
OsCam Changelogs
Add support Tongfang3 (NTIC2) CAS (Thanks to nx111)
for armv7 devices (bin only) openssl 3.3.2
new openatv 7.4 /7.5 , pure2 7.4 ,EGAMI 10.5 , OpenBh 5.4.1 , opendroid-7.5, openspa-8.4.001
openssl 3.3.2 +libusb1.0.27+ Lpcsc lite2.2.3+ libdvbcsa 1.1.0.32-1.1.0.64-1.1.0-128 & lib curl 8.10.1+libzlib1.3.1-emu- icam-neon-upx
oscam-git11839-802@178662a1-armv7_generic-webif-dvbapi-ssl-libusb-pcsc-libdvbcsa-emu-icam-neon-upx-signed
openssl 3.3.2 +libusb1.0.27+ Lpcsc lite2.2.3+libdvbcsa 1.1.0.32 + lib curl 8.10.1+libzlib1.3.1-emu- neon-upx
oscam-git11839-802@178662a1-armv7_generic-webif-dvbapi-ssl-libusb-pcsc-emu-neon-upx-signed
for armv7 devices (bin only)
For py2 & py3 &gx
openssl 1.1.1w +libusb1.0.27+ Lpcsc lite2.2.3+libdvbcsa 1.1.0.32-1.1.0.64-1.1.0-128 + lib curl 8.10.1+libzlib1.3.1-emu- icam-neon-upx
oscam-git11839-802@178662a1-armv7_generic-webif-dvbapi-ssl-libusb-pcsc-libdvbcsa-emu-icam-neon-upx-signed 2
openssl 1.1.1w + lib curl 8.10.1+libusb1.0.27+libzlib1.3.1-emu-upx
oscam-git11839-802@178662a1-armv7_generic-webif-dvbapi-ssl-libusb-emu-upx-signed
also working on Octagon SF8008 with Define OS Just change the name to oscam-gx
Transfer it via DCC or FileZilla Client To the extension usr/local/bin
You will find it after changing the name in the attachments
for sh4 devices (bin only)
openssl 1.1.1w& libdvbcsa 1.1.0.32& Lpcsc lite1.9.5& libusb 1.0.27 & libzlib1.3.1+ lib curl 8.10.1- emu-icam-upx
oscam-git11839-802@178662a1-sh4_generic-webif-dvbapi-ssl-libusb-pcsc-libdvbcsa-emu-icam-upx-signed
Good luck everyone
-
Hi, Is there a version with pcsc support ???, thanks.
NO go to this link to find your order
-
OSCam 11837 EMU 802 - 23/09/2024
Compiled by ME
I'm a beginner, not a professional, and I'm just trying to learn
Weekly release
Sep 23, 2024
oscam-git11837-802@9f9870a2- oscam patched
OsCam Changelogs
signing: fix upx decompression
for armv7 devices (bin only) openssl 3.3.1
new openatv 7.4 /7.5 , pure2 7.4 ,EGAMI 10.5 , OpenBh 5.4.1 , opendroid-7.5, openspa-8.4.001
openssl 3.3.1 +libusb1.0.27+ Lpcsc lite2.2.3+ libdvbcsa 1.1.0.32-1.1.0.64-1.1.0-128 & lib curl 8.8.0+libzlib1.3.1-emu- icam-neon-upx
oscam-git11837-802@9f9870a2-armv7_generic-webif-dvbapi-ssl-libusb-pcsc-libdvbcsa-emu-icam-neon-upx
openssl 3.3.1 +libusb1.0.27+ Lpcsc lite2.2.3+libdvbcsa 1.1.0.32 + lib curl 8.8.0+libzlib1.3.1-emu- neon-upx
oscam-git11837-802@9f9870a2-armv7_generic-webif-dvbapi-ssl-libusb-pcsc-emu-neon-upx
for armv7 devices (bin only)
For py2 & py3 &gx
openssl 1.1.1w +libusb1.0.27+ Lpcsc lite2.2.3+libdvbcsa 1.1.0.32-1.1.0.64-1.1.0-128 + lib curl 8.8.0+libzlib1.3.1-emu- icam-neon-upx
oscam-git11837-802@9f9870a2-armv7_generic-webif-dvbapi-ssl-libusb-pcsc-libdvbcsa-emu-icam-neon-upx 2
openssl 1.1.1w + lib curl 8.8.0+libusb1.0.27+libzlib1.3.1-emu-upx
oscam-git11837-802@9f9870a2-armv7_generic-webif-dvbapi-ssl-libusb-emu-upx
also working on Octagon SF8008 with Define OS Just change the name to oscam-gx
Transfer it via DCC or FileZilla Client To the extension usr/local/bin
You will find it after changing the name in the attachments
for sh4 devices (bin only)
openssl 1.1.1w& libdvbcsa 1.1.0.32& Lpcsc lite1.9.5& libusb 1.0.27 & libzlib1.3.1- emu-icam-upx
oscam-git11837-802@9f9870a2-sh4_generic-webif-dvbapi-ssl-libusb-pcsc-libdvbcsa-emu-icam-upx
Good luck everyone
-
Can you make an image for Amiko Viper 4k?
It's an official version of the team you can ask them
-
I put it in the folder where I have the images and on the decoder I go to images and I can't find it to be able to install it
-
to install it you can't find it in the images why? thank you
Download it from the site
