Posts by ahmed gazye
-
-
In advance we thanks Algerian developer Mino6060 to wonderful plugin
New update for Plugin freeserver_3.7
fix all problems
Now you will find
files Ncam server, OScam server, Gcam server extension etc / tuxbox / config and also you will find Ccam.cfg extension / usr/ keys & etc by all the servers
enigma2-plugin-extensions-freeserver_3.7_all.ipk
-
The new released as 21/5 /2019
Download from official website ...
http://pur-e2.club/OU/images/index.php?dir=6.2/fulan/
-
The new released as 21/5/2019
Download from official website ...
http://pur-e2.club/OU/images/index.php?dir=6.2/fulan/
-
-
Dear friends
Please notice It is better to
-gave all the file in Plugin freeserver_3.6 permission 755 To work well
-that all images it can not work with the Plugin After experimenting with the best image work of the Plugin function is
openatv
openesi
-after the installation of the Plugin is better
to restart your Reciver
who face a problem in loading the Plugin
Like the following mistake
Plugins are not available:
Extensions/FreeServer (no module Named boxbranding)
Try the next solution
Scroll the attached file to the path of usr / lib / enigma2 / python and then restart ..
Or execute orders:
opkg update
opkg install boxbranding
Good luck
-
-
My friend / Melgas
These are three config files for three emu you have only one Oscam Emu
You need to add only your own all Oscam config , & SoftCam
It is preferred
to avoid any difference in settings between the programmers and this way does not matter where to read the files that Emu needs because it exists in the two tracks
etc / tuxbox / config
&
usr / keys or var / keys Depending on the path of your version
Download the attached file
To these two tracks
Good luck
-
My friend / esuo2
In the humble opinion In the light of the different hardware and copies and plugin and emu in the end, everything is subject to experience you can try and work of best ways after the experience
Good luck
-
Notic
if you used
enigma2-plugin-extensions-bissfeed-autokey_20190516-r1.1
Plugin bissfeed-autokey Plugin for updating blades for auto
Add these lines to oscam config
Code:
[webif]
httpport = 8888
httpuser = oscam
httppwd = oscam
httplocale = en_EN.utf8
httphideidleclients = 0
httpallowed = 127.0.0.1,192.168.0.0-192.168.0.255,192.168.1.0-192.168.1.255
Good luck
-
The best config to most important of EMUS ncam& oscam& gcam
Dear friends
These settings of my device works excellence to open most of the channels, to most important of EMUS ncam& oscam& gcam if one loved their experience and tells us about the experience to benefit all with the name of the version and the device Preferably and not a command For everyone to benefit
3emu config ncam& oscam& gcam.rar
Good luck
-
My friend / esk_saban
It's a disadvantage of a weak download site but you should try more than once and wait
See the download is already weak but the duplicate will be downloaded
But will be patiently able to download seeThis is the file after the download
Good luck
-
Another wonderful by Vasiliks on 17/05/2019 for the copy of the developed Openpli
openpli-enigma2-homebuild-spark-20190517_usb
This is a new update to the previous version and wonderful on 12-18-27 / 4 & 4/5/2019 compiled from the most developed version and the new update
Updated extplayer to version 68, gstreamer to version 1.17.0.1.
So the version became even more wonderful and even preceded copies of other teams with the updates
The version is dedicated to the 7111 processor you can set on the external flash card
plugin NFR4XBoot or plugin imagemanager
But suitable for processor 7162 as you will see later
To access the DCC version
user = root
password = root
openpli-enigma2-homebuild-spark-20190517_usb
https://giclub.tv/index.php?ac…loads;sa=downfile&id=4068
For the owners of the processor 7162 You can install the copies on your device On external flash only by Nvr4X Multiboot of opennfr-5.3 and you must install the image on the device to work this plugin this wonderful , which I always recommend to use the wonderful features See is a picture of my device that carries the processor 7162
Good luck
-
My friend / Master G
Sorry, the replies were done at the same time so I did not see your response
Good luck
-
My friend / MrTS69
For this version you need OSCam from Professor MOHAMED_OS
oscam-svn11518-sh_4-webif-emu-r796.zip
After unpacking the file, move the contents of by the programDCC
To track
var / emu
& gave him permission 755
Good luck
-
The new released as 16/5 /2019
Download from official website ...
http://pur-e2.club/OU/images/index.php?dir=6.2/fulan/
-
The new released as 16/5/2019
Download from official website ...
http://pur-e2.club/OU/images/index.php?dir=6.2/fulan/
-
My friend / davodeni
Create a folder and name it emu
in track
var
Put all the emus inside it
& gave him permission 755
Good luck
-
freeserver 1.1 modify by scripts freeserver 3.5 Without other additions
FreeServer 3.5 Script Gives you the following outputs
files Ncam server, OScam server, only not Gcam server extension etc / tuxbox / config and also you will find Ccam.cfg extension / etc by all the servers
freeserver 1.1 modify FreeServer 3.5 Script Gives you the following outputs
files Ncam server, OScam server, Gcam server extension etc / tuxbox / config and also you will find Ccam.cfg extension / usr/ keys by all the servers
With the attached the Plugin freeserver 1.1 modify by me from scripts freeserver 3.5 extension file,add it with program DCC to the following path
usr /lib/ engima2 / python / Plugin / extensions
Then restart your Reciver
freeserver 1.1 modify v 3.5.rar
Enjoy & Good luck
-
This is my modified on FreeServer 3.5 Script developer Mino6060
First of all, thanks to the Algerian developer Mino6060, I have modified FreeServer Script many times without referring to it and Perhaps he would excuse me
FreeServer 3.5 Script Gives you the following outputs
files Ncam server, OScam server, only not Gcam server extension etc / tuxbox / config and also you will find Ccam.cfg extension / etc by all the servers
But after my modified FreeServer 3.5 Script Gives you the following outputs
files Ncam server, OScam server, Gcam server extension etc / tuxbox / config and also you will find Ccam.cfg extension / usr/ keys by all the servers
the attached file, move it by the program DCC and confirm the replacement to the following path
usr /lib/ engima2 / python / Plugin / extensions / freeserver
& gave it permission 755
To my friends who use the plugin i have modified on the following link
freeserver 1.1 modify by scripts freeserver 3.5 Without other additions
They can follow the same procedure on the plugin to take advantage of new servers
Enjoy & Good luck
