My friend / first khan
Try this version
Exclusive Neutrino3.7.1-MP-DDT-FFTeam-1- 4 -2019 -Spark 7162-Receiver.zip
Check out a topic that's handy for the version
FreeServer Script for Ncam& OScam& Gcam server on Neutrino image
Good luck
Posts by ahmed gazye
-
-
My friend / tromo
This is explained by the device's RAM method. Each system operates separately with separate RAMs
Other than the swap Why they put in device 2x 128MB DDR RAM instead of one 256MB
See Ram with version 113 MB ( 128-MB - 113MB = 15MB) uesd of the system Other than the swap
& free 23 MB
Good luck
-
My friend / first khan
Firstly you must install the image opennfr-5.3 on your device in Internal flash and then you can work in plugin Nvr4X Multiboot As it is a special plugin for it and works only inside it
Do you have it ready
It is an old version and it has no update and its team Stop for the support Spark Devices
Good luck
-
My friend / first khan
I work by cable directly and do not work wifi
But the version has a definition of flash try
Good luck
-
My friend / first khan
of course, yes
It's obvious to see the versions of my device
But with the following condition
For the owners of the processor 7162 You can install the copies on your device On external flash only by Nvr4X Multiboot of opennfr-5.3 and you must install the image on the device to work this plugin this wonderful , which I always recommend to use the wonderful features See is a picture of my device that carries the processor 7162
Good luck
-
My friend / SkullFace
Firstly The manual says the box has 2x 128MB DDR RAM, however the linux reads only 128MB total!!!!
Each one is a separate dedicated system
One is DDR RAM 128MB to the Spark system
One is DDR RAM 128MB to linux system
Each one is 128MB
Try this version It's new and modern
openpli-enigma2-homebuild-spark-20190504_usb.zip by Vasiliks
Good luck
-
My friend / Ifadl
I am not a developer of the version whose owner is the one who did so you can change the image of the boot with by yourself as I did
And I can not change it
Good luck
-
After testing it
Plugin freeserver_3.4 has many problems & crashes
For example
Take off the device is delayed because it download of many files with the Volder Temp & so on
-
-
be careful
attached the Full Plugin freeserver 1.1 modify
After Unpack About the file
Make sure that the file freeserver is not inside another file and that it has taken the 755 Authorization
Enjoy & Good luck
-
freeserver 1.1 modify by scripts freeserver 3.4 Without other additions
freeserver 1.1 modify Gives you the following outputs
files Ncam server, OScam server, Gcam server extension etc / tuxbox / config and also you will find Ccam.cfg extension / usr/ keys by all the servers
With the attached the Plugin freeserver 1.1 modify by me from scripts freeserver 3.4 extension file,add it with program DCC to the following path
usr /lib/ engima2 / python / Plugin / extensions
Then restart your Reciver
Enjoy & Good luck
-
This is my modified on FreeServer 3.4 Script developer Mino6060
First of all, thanks to the Algerian developer Mino6060, I have modified FreeServer Script many times without referring to it and Perhaps he would excuse me
FreeServer 3.4 Script Gives you the following outputs
files Ncam server, OScam server, only not Gcam server extension etc / tuxbox / config and also you will find Ccam.cfg extension / etc by all the servers
But after my modified FreeServer 3.4 Script Gives you the following outputs
files Ncam server, OScam server, Gcam server extension etc / tuxbox / config and also you will find Ccam.cfg extension / usr/ keys by all the servers
the attached file, move it by the program DCC and confirm the replacement to the following path
usr /lib/ engima2 / python / Plugin / extensions / freeserver
To my friends who use the plugin i have modified on the following link
freeserver 1.1 modify by scripts freeserver 3.3 Without other additions
They can follow the same procedure on the plugin to take advantage of new servers
Enjoy & Good luck
-
The new released as 8/5/2019
Download from official website ...
http://pur-e2.club/OU/images/index.php?dir=6.2/fulan/
-
The new released as 8/5 /2019
Download from official website ...
http://pur-e2.club/OU/images/index.php?dir=6.2/fulan/
-
my friends
Mino6060 / said
I found a small error in the previous version, as I did not add the script Foul_freecccamserver.sh
To file
enigma2-plugin-extensions-freeserver_3.4_all
And for those who install the plugin, there is no need to re - install only once again can be added script
In the attachments to the file scri pts located inside the plugin and no need to put chmod permission
Good luck
-
my friends
Possibility to be Missing a file
Make sure the file is in the specified extension
If it does not exist add it
Good luck
-
In advance we thanks Algerian developer Mino6060 to wonderful plugin
New update for Plugin freeserver_3.4
enigma2-plugin-extensions-freeserver_3.4_all ipk
enigma2-plugin-extensions-freeserver_3.4_all ipk
Today is a new update FreeServer 3.4 The update is characterized by the addition of new servers in the main script
And 22 servers according to the choice, as there are those who do not know the use of CronTimers new property and that
Run the Auto_update_Foul_freecccamserver script once enough to activate the update
Automatic for 22 servers and so on at 2 am for anyone who turns off the device before this time adjusts the file
root in etc / cron / crontabs and sets the time it wants
There are also new additions such as the weekly program of football, wisdom of the day, the Koran
Vpn servers more than 200 countries but only 100 servers available so you have to execute the gateway.vpn list script and then choose the country that we want based on the speed of the server and the IP address all available in a table ..
It is best to use an openatv image that contains all the necessary drivers and files.
Now you will find
files Ncam server, OScam server, only not Gcam server extension etc / tuxbox / config and also you will find Ccam.cfg extension / etc by all the servers
Marking is very important
Of carrying the plugin of the previous topic ZYGA Possibility to be Missing a file to download from here And transfer it to the file script in plugin-freeserver
Possibility to be Missing a file
Make sure the file is in the specified extension
If it does not exist add it
For those who want a full plugin
enigma2-plugin-extensions-freeserver_3.4_all.ipk
Good luck
-
-
The new released as 5/5 /2019
Download from official website ...
http://pur-e2.club/OU/images/index.php?dir=6.2/fulan/
-
The new released as 5/5/2019
Download from official website ...
http://pur-e2.club/OU/images/index.php?dir=6.2/fulan/
