Posts by eggie

Hi all

My prevoius provider i had oscam working switched provider cant get oscam to work.

below my oscam server

reader]

label=serverxxxx.hopto.xx

enable=1

protocol=newcamd

key=0102030405060708091011121314

device=serverxxxx.hopto.xx,1500

user=exxxxx

password=iQxxxxx

group=1

inactivitytimeout=1

reconnecttimeout=30

lb_weight=100

cccversion=2.1.2

cccmaxhops=10

cccwantemu=1

ccckeepalive=1

oscam config below

[global]

nice = -1

logfile = /var/log/oscam.log

clienttimeout = 5000

fallbacktimeout = 2500

clientmaxidle = 120

cachedelay = 120

bindwait = 120

resolvedelay = 30

serialreadertimeout = 1500

maxlogsize = 10

waitforcards = 1

preferlocalcards = 1

saveinithistory = 1

keepalive = 1

[dvbapi]

enabled = 1

user = linuxsatsupport

boxtype = dreambox

au = 1

[cccam]

port = 12000

version = 2.1.3

build = 3165

reshare = 1

[webif]

httpport = 8888

httpuser =

httppwd =

httprefresh = 15

httpallowed = 192.168.0.0 - 255.255.255.255

debug = 255

[monitor]

appendchaninfo = 1

oscam user below

[account]

user = linuxsatsupport

group = 1

caid = 1841

ident = 1841:000000

au = SKYUK

Can anyone check let me know , i think the config file could be wrong.

any help appreciated it.

Thanks

Eggie

hi all

using mgcamd getting alot of freezing so trying to get oscam to work , but wont work, using Openvix 5.1.022 latest

tried several oscams from my openvix setting but wont work.

heres my setting i am using

oscam config:

[global]

logfile = /dev/tty

clienttimeout = 4000

clientmaxidle = 300

netprio = 1

nice = -1

maxlogsize = 1000

waitforcards = 0

preferlocalcards = 1

dropdups = 1

[dvbapi]

enabled = 1

au = 1

pmt_mode = 0

request_mode = 1

user = linuxsatsupport

read_sdt = 1

write_sdt_prov = 1

boxtype = dreambox

[webif]

httpport = 8888

httpshowmeminfo = 1

httpshowuserinfo = 1

httpshowcacheexinfo = 1

httpshowecminfo = 1

httpshowloadinfo = 1

httpallowed = 127.0.0.1,192.1.0.0-192.168.255.255

http_status_log = 1

[newcamd]

port = 10001@0963:000000

key = 0102030405060708091011121314

mgclient = 1

keepalive = 1

[cccam]

port = 12000

version = 2.1.3

build = 3165

reshare = 1

oscam server:

[reader]

label=XXXXXXXXX.biz

enable=1

protocol=newcamd

key=0102030405060708091011121314

device=XXXXXXXXX,18123

user=XXXXX

password=XXXXX

group=1

inactivitytimeout=1

reconnecttimeout=30

lb_weight=100

cccversion=2.1.2

cccmaxhops=10

cccwantemu=1

ccckeepalive=1

oscam user:

[account]

user = linuxsatsupport

group = 1

caid = 1841

ident = 1841:000000

au = CABLEUK

any help appreciated

Hi master

I thought i got it working , it worked for a few minutes and stopped again. Tried loads of mg configs but wont clear channels. Soon as i use cccam everything works perfect.

So stuck at moment using cccam .

Any help appreciated everything OK ubtil updated my receiver firmware. Receiver gigablue quad plus enigma 2.

thanks

eggie

Hi Abu

Sorry for late reply got it to work just use a different mg config and it worked.

Thanks for help

eggie

hi all

was on openvix 4 image everything fine but no dowloadable plugins were avaiable mgcamd working fine.

Upgraded to openvix 5 image put everything where it should go newcamd list and mgcamd in usr/keys and downloaded

mgcamd 1.35a and mgcamd 1.38 and nothing clearing using same line in cccam eveything works and idea how to get mgcamd to work

my mgcamd here.

# EMM messages

# 00 dont show any EMMs (default)

# 01 show only valid EMMs

# 02 show valid and bad EMMs with complete data display

M: { 01 }

# ECM messages

# 00 dont show anything about ecm

# 01 normal mode, show pids processed, decoded ecm and cw

# 02 verbose mode, show valid and bad ECMs with data

C: { 01 }

# AU

# 00 disable, no emm pids processed

# 01 enable, emm pids always processed for soft-au and shared cards

# 02 auto, emm started only if channel cant be decoded

# 03 process emm pids for network cards update only

A: { 01 }

# key update (sum 01 or 02 with 04)

# 01 update only new keys, default setting

# 02 update all keys (used for valid PMK checking)

# 04 enable TPS au

# + tps SID, which pmt pid contains au pid

U: { 01 }

# config files folder (softcam, autoroll, ignore/priority)

# 00 files in /var/keys

# 01 files in /tmp

T: { 00 }

# network mode, use summ for several clients

# 00 no network (default)

# 01 newcamd netclient

# 02 radegast netclient

# 04 camd3 netclient

# 08 gbox netclient

G: { 33 }

# network retry, use summ for several options

# 00 disable

# 01 retry every new ecm

# 02 try to connect to offline shares every Q: seconds

# 04 try to detect and fast reconnect to lost (and not used atm) server

# + XX messages number and YY seconds to reconnect

# mg will reconnect to server, if no answer to last XX ecm/keepalive or

# if no answer for last ecm or keepalive sent for YY seconds

# set to 0 to disable

N: { 07 }

# network ecm timeout in seconds

K: { 07 }

# newcamd dead routes connect retry, sec

Q: { 10 }

# network shares priority

# 00 gbox, newcamd, radegast, camd3 (default)

# 01 camd3, radegast, newcamd, gbox

# 02 newcamd, camd3, gbox, radegast

P: { 02 }

# on screen display type

# 00 No OSD (default)

# 01 neutrino

# 02 enigma

# 03 relook

# + user password for http auth

O: { 00 }

# on screen display Options, summ of:

# 01 show emu ecm

# 02 show network shares messages

# 04 show decoding failed / fta

# 08 show emm keys update

# + web port to use for osd

S: { 11 } 80

# Log option, summ of:

# 00 off

# 01 network udp log

# 02 log to console

# 04 file, appended ! delete it by yourself, before it eat all your hdd

# + IP udp-port log-file-name

L: { 00 }

# keep ecm cache, seconds

# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,

# for openbox/elanvision users with remote shares make sense to set it higher than default value,

# to not hammer cards while timeshifting or playing crypted recordings.

E: { 15 }

# cache option, summ of:

# 00 Off (default)

# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list

# 02 Ecm data cache, remember CW for (E time

# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart

H: { 04 }

# reread files, summ of:

# 00 No (default)

# 01 reread config file on channel change (including priority and ignore, but not replace/cache)

# 02 reread SoftCam.Key on channel change

# 04 reread SoftCam.Key if file changed

R: { 00 }

# debug, summ of

# 00 off (default)

# 01 debug ecm

# 02 debug emm

# 04 debug network ecm

# 08 debug network emm

# 16 debug network login

# 32 show mem/cpu stats every 1 min

# 64 add timestamp to log messages

D: { 00 }

# box type

# 00 autodetect, change only if you think wrong type detected.

# 01 dbox2

# 02 dreambox

# 03 triple-dragon

# 04 relook

# 05 openbox

B: { 33 }

# Mapping 18xx

# 00 disable mapping

# 01 map 18xx to 1801

Any help appreciated.

Eggie

Hi jensen
Using same splitter my net ISis 40974 wolverhampton but in walsall finally got it working by converting coax to f connector attacvhing direct vm feed found channels but still ABM not working always Tuner timeout Lock any help on ABM appreciated it. Also finding some channels not receiving full signal most betwen 79% to 99% but some only 31% any idea why thst is .

any help appreciated

Thanks
Eggie

Hi all
Used Rf which is the top connection but cant tune anything in always comes back no channels found. Tried the bottom connection same thing . Tried autobouquets same thing. The splitter i am using is 1000mhz 4 way i can get a signal through splitter because if i connect my broadband connection to it my wireless router works through it, but i cant find any channels. Problem is the connectors on back are RF so i cant even put my broadband connection into it to see if that way i get any channels.

All these problems occurred when i moved address couldnt get the quad plus to find cable or sky channels or even operate my motor so sent box back was tested and it was fine. I just cant seem to pick any channels up. Also which cable are you guys using i am just using regular sat cable and making sure inner does not touch outer cable and then using RF connector to connect. I am not having any luck at finding channels always comes back no channels found , it doesnt matter what method i use manual scan auto scan or autobouquets always the same no channels.

Desperate for help any help appreciated please.

Thanks
Eggie

Hi master
thanks for the info i wasnt wanting foriegn channels so softcvam key file no use to me.

Thanks
Eggie

Hi master
Thanks for mg cfg will try later tonight as i am at work so will let u know tonight when I get home after 7pm.

Thanks for your help gladly appreciated

Eggie

- - - Updated - - -

Hi all
Not tested the mg cfg files yet as am at work where does the soft cam key file go ? Also do I need that file and what goes inside the file?

Thanks for all the help everyone appreciate it
Eggie

Hi
I am using openvix apollo the latest image. I need a mg cfg to get the box running I have two n lines. I am using mg cam 1.38 also tried 1.35a but not working at all . The lines work ok in my Vu solo on a cccam cfg but can't get to work in mg cfg . I need a mg cfg to work in gigablue quad plus receiver .

Any help appreciated.

Thanks
Eggie

hi all
where does the mg cfg go in gigablue quad plus please. Tried in usr/keys and also var/keys nothing working.

anh help appreciated

thanks
eggie

Quote from musogeek

Press the audio button on your remote and see if there are any alternative audio streams available, and if there are, try another audio stream. I have noticed that these channels have Dutch and English streams, and Dutch has no sound. You can choose the default stream to use in future by going to menu- setup- system- Auto language selection.

Hi musogeek
Thanks for your tip it worked a treat it only happened when I upgraded BH to 2.0.2

Thanks for your help glafly appreciated.

Eggie

hi all

got a problem i have no volume on two asian channela zee tv and zee pujabi the rest of channels ok using motorised system and also have BH 2.0.2 installed.
changed channel list to most recent problem still there.

any help appreciated.

thanks
eggie