Posts by muta

root@muta:~# bash -x /etc/init.d/oscam start
+ . /lib/lsb/init-functions
+++ run-parts --lsbsysinit --list /lib/lsb/init-functions.d
++ for hook in '$(run-parts --lsbsysinit --list /lib/lsb/init-functions.d 2>/dev/null)'
++ '[' -r /lib/lsb/init-functions.d/20-left-info-blocks ']'
++ . /lib/lsb/init-functions.d/20-left-info-blocks
++ for hook in '$(run-parts --lsbsysinit --list /lib/lsb/init-functions.d 2>/dev/null)'
++ '[' -r /lib/lsb/init-functions.d/40-systemd ']'
++ . /lib/lsb/init-functions.d/40-systemd
+++ _use_systemctl=0
+++ '[' -d /run/systemd/system ']'
+++ '[' -n '' ']'
+++ '[' 1349 -ne 1 ']'
+++ '[' -z '' ']'
+++ '[' -z '' ']'
+++ case $(readlink -f "$0") in
++++ readlink -f /etc/init.d/oscam
+++ _use_systemctl=1
+++ prog=oscam
+++ service=oscam.service
++++ systemctl -p CanReload show oscam.service
+++ '[' CanReload=no = CanReload=no ']'
+++ '[' start = reload ']'
+++ '[' 1 = 1 ']'
+++ set +e
+++ set +u
+++ '[' xstart = xstart -o xstart = xstop -o xstart = xrestart -o xstart = xreload -o xstart = xforce-reload -o xstart = xstatus ']'
+++ systemctl_redirect /etc/init.d/oscam start
+++ local s
+++ local rc
+++ local prog=oscam
+++ local command=start
+++ case "$command" in
+++ s='Starting oscam (via systemctl)'
+++ service=oscam.service
++++ systemctl -p LoadState show oscam.service
+++ state=LoadState=loaded
+++ '[' LoadState=loaded = LoadState=masked ']'
+++ '[' start = status ']'
+++ log_daemon_msg 'Starting oscam (via systemctl)' oscam.service
+++ '[' -z 'Starting oscam (via systemctl)' ']'
+++ log_daemon_msg_pre 'Starting oscam (via systemctl)' oscam.service
+++ log_use_fancy_output
+++ TPUT=/usr/bin/tput
+++ EXPR=/usr/bin/expr
+++ '[' -t 1 ']'
+++ '[' xxterm '!=' x ']'
+++ '[' xxterm '!=' xdumb ']'
+++ '[' -x /usr/bin/tput ']'
+++ '[' -x /usr/bin/expr ']'
+++ /usr/bin/tput hpa 60
+++ /usr/bin/tput setaf 1
+++ '[' -z ']'
+++ FANCYTTY=1
+++ case "$FANCYTTY" in
+++ true
+++ echo -n '[....] '
[....] +++ '[' -z oscam.service ']'
+++ echo -n 'Starting oscam (via systemctl): oscam.service'
Starting oscam (via systemctl): oscam.service+++ log_daemon_msg_post 'Starting oscam (via systemctl)' oscam.service
+++ :
+++ /bin/systemctl start oscam.service
+++ rc=0
+++ '[' start = status ']'
+++ log_end_msg 0
+++ '[' -z 0 ']'
+++ local retval
+++ retval=0
+++ log_end_msg_pre 0
+++ log_use_fancy_output
+++ TPUT=/usr/bin/tput
+++ EXPR=/usr/bin/expr
+++ '[' -t 1 ']'
+++ '[' xxterm '!=' x ']'
+++ '[' xxterm '!=' xdumb ']'
+++ '[' -x /usr/bin/tput ']'
+++ '[' -x /usr/bin/expr ']'
+++ /usr/bin/tput hpa 60
+++ /usr/bin/tput setaf 1
+++ '[' -z 1 ']'
+++ true
+++ case "$FANCYTTY" in
+++ true
++++ /usr/bin/tput setaf 1
+++ RED=''
++++ /usr/bin/tput setaf 2
+++ GREEN=''
++++ /usr/bin/tput setaf 3
+++ YELLOW=''
++++ /usr/bin/tput op
+++ NORMAL=''
+++ /usr/bin/tput civis
+++ /usr/bin/tput sc
+++ /usr/bin/tput hpa 0
+++ '[' 0 -eq 0 ']'
+++ /bin/echo -ne '[ ok '
[ ok +++ /usr/bin/tput rc
+++ /usr/bin/tput cnorm
+++ log_use_fancy_output
+++ TPUT=/usr/bin/tput
+++ EXPR=/usr/bin/expr
+++ '[' -t 1 ']'
+++ '[' xxterm '!=' x ']'
+++ '[' xxterm '!=' xdumb ']'
+++ '[' -x /usr/bin/tput ']'
+++ '[' -x /usr/bin/expr ']'
+++ /usr/bin/tput hpa 60
+++ /usr/bin/tput setaf 1
+++ '[' -z 1 ']'
+++ true
+++ case "$FANCYTTY" in
+++ true
++++ /usr/bin/tput setaf 1
+++ RED=''
++++ /usr/bin/tput setaf 3
+++ YELLOW=''
++++ /usr/bin/tput op
+++ NORMAL=''
+++ '[' 0 -eq 0 ']'
+++ echo .
.
+++ log_end_msg_post 0
+++ :
+++ return 0
+++ return 0
+++ exit 0
root@muta:~#

d893c8029e5f6af0cdb0dac.png
after typing that command

- - - Updated - - -

#!/bin/sh
# Start/stop the OScam daemon.
#
### BEGIN INIT INFO
# Provides: OScam
# Required-Start: $syslog $network $pcscd
# Required-Stop: $syslog $network $pcscd
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: Start and Stop OScam
# Description: OScam init script. This script start and stop OScam.
### END INIT INFO

. /lib/lsb/init-functions

NAME=oscam
DAEMON=/usr/local/bin/$NAME
CONFIG_DIR=/usr/local/etc
PIDFILE=/var/run/oscam.pid
LOG=/var/log/oscam.log
LOGUSR=/var/log/oscamuser.log
LOGCW=/var/log/cw.log
STARTAS="$DAEMON -- -b -c $CONFIG_DIR"

#test -f $DAEMON || exit 0

[ -d $CONFIG_DIR ] || exit 0

echo $NAME

clear_file() {
# Clear log and pid file if exists
if [ -e $PIDFILE ]
then
rm -f $PIDFILE
fi
if [ -e $LOG ]
then
rm -f $LOG
fi
if [ -e $LOGUSR ]
then
rm -f $LOGUSR
fi
if [ -e $LOGCW ]
then
rm -f $LOGCW
fi
}
case "$1" in
start)
clear_file

log_daemon_msg "Starting OScam daemon" "OScam"
start-stop-daemon --start --quiet --exe $DAEMON --startas $STARTAS
log_end_msg $?
;;
stop)
log_daemon_msg "Stopping OScam daemon" "OScam"
start-stop-daemon --stop --quiet --exe $DAEMON
log_end_msg $?
;;
restart)
log_daemon_msg "Restarting OScam daemon" "OScam"
start-stop-daemon --stop --retry 5 --quiet --exe $DAEMON
clear_file
start-stop-daemon --start --quiet --exe $DAEMON --startas $STARTAS
log_end_msg $?
;;
status)
status_of_proc -p $PIDFILE $DAEMON $NAME && exit 0 || exit $?
;;
*)
log_action_msg "Usage: /etc/init.d/OScam {start|stop|restart|status}"
exit 2
;;
esac
exit 0

- - - Updated - - -

if i dont have this command oscam does not start

/usr/local/bin/oscam -b -r2

bc9fae6dfa63d86cb2b8e.png

after changing getting this after command

- - - Updated - - -

/usr/local/bin/oscam -b -r2

found this command on google after searching for "start oscam manually" good news is its now running but i have to put that command every time i switch server on.anyway of making it run auto? the other thing is my client is not connecting.
user config [account]
user = test
pwd = password
uniq = 3
au = whitecard
group = 1,2,3

C: dyndns.org 12222 test password

[global]
serverip = 192.168.1.20
nice = -1
WaitForCards = 1
saveinithistory = 1

[cccam]
port = 12222
reshare = 1
version = 2.3.0
updateinterval = 900


# logging
pidfile = /var/run/oscam.pid
logfile = /var/log/oscam.log
usrfile = /var/log/oscamuser.log
cwlogdir = /var/log/cw.log
maxlogsize = 1000

# web interface
[webif]
httpport = 1234
httpuser = oscam
httppwd = password
httpallowed = 0.0.0.0-255.255.255.255

- - - Updated - - -

650a1.png

thats after the command

05945e5781.png
sorry i am very new to this stuff what im doing wrong i dont know

no its not working.when i switch on server it goes auto exit

- - - Updated - - -

73763521f32.png8583ced4e46620c663da1b531.png

- - - Updated - - -

oscam starts then auto exit

Sent from my iPhone using Tapatalk

If I start oscam this what I get. No I cannot connect to webif. That code to see listening ports I seem to be getting it wrong.

Sent from my iPhone using Tapatalk

oscam fails to start
need some advice please. my debian server oscam is refusing to start. all is upto date.

root@muta:~# ps x
PID TTY STAT TIME COMMAND
1 ? Ss 0:01 init [2]
2 ? S 0:00 [kthreadd]
3 ? S 0:00 [ksoftirqd/0]
4 ? S 0:00 [kworker/0:0]
5 ? S 0:00 [kworker/u:0]
6 ? S 0:00 [migration/0]
7 ? S 0:00 [watchdog/0]
8 ? S< 0:00 [cpuset]
9 ? S< 0:00 [khelper]
10 ? S 0:00 [kdevtmpfs]
11 ? S< 0:00 [netns]
12 ? S 0:00 [sync_supers]
13 ? S 0:00 [bdi-default]
14 ? S< 0:00 [kintegrityd]
15 ? S< 0:00 [kblockd]
16 ? S 0:00 [kworker/0:1]
17 ? S 0:00 [khungtaskd]
18 ? S 0:00 [kswapd0]
19 ? SN 0:00 [ksmd]
20 ? S 0:00 [fsnotify_mark]
21 ? S< 0:00 [crypto]
24 ? S 0:00 [kworker/0:2]
110 ? S 0:00 [khubd]
129 ? S< 0:00 [firewire]
130 ? S< 0:00 [ata_sff]
133 ? S 0:00 [scsi_eh_0]
134 ? S 0:00 [scsi_eh_1]
135 ? S 0:00 [kworker/u:1]
136 ? S 0:00 [kworker/u:2]
137 ? S 0:00 [scsi_eh_2]
138 ? S 0:00 [scsi_eh_3]
139 ? S 0:00 [kworker/u:3]
140 ? S 0:00 [kworker/u:4]
175 ? S 0:00 [jbd2/sda1-8]
176 ? S< 0:00 [ext4-dio-unwrit]
311 ? Ss 0:00 udevd --daemon
374 ? S 0:00 udevd --daemon
375 ? S 0:00 udevd --daemon
403 ? S 0:00 [scsi_eh_4]
404 ? S 0:00 [usb-storage]
426 ? S< 0:00 [hd-audio0]
432 ? S< 0:00 [ttm_swap]
448 ? S 0:00 [kworker/0:3]
452 ? S 0:00 [kworker/0:4]
453 ? S 0:00 [kworker/0:5]
457 ? S 0:00 [kworker/0:6]
1227 ? S 0:00 [jbd2/sda9-8]
1228 ? S< 0:00 [ext4-dio-unwrit]
1232 ? S 0:00 [jbd2/sda8-8]
1233 ? S< 0:00 [ext4-dio-unwrit]
1234 ? S 0:00 [jbd2/sda5-8]
1235 ? S< 0:00 [ext4-dio-unwrit]
1236 ? S 0:00 [jbd2/sda6-8]
1237 ? S< 0:00 [ext4-dio-unwrit]
1513 ? Ss 0:00 /sbin/rpcbind -w
1549 ? S< 0:00 [rpciod]
1551 ? S< 0:00 [nfsiod]
1558 ? Ss 0:00 /usr/sbin/rpc.idmapd
1827 ? Sl 0:00 /usr/sbin/rsyslogd -c5
1851 ? S 0:00 [flush-8:0]
1858 ? Ss 0:00 /usr/sbin/acpid
1894 ? Ss 0:00 /usr/sbin/apache2 -k start
2019 ? Ss 0:00 /usr/sbin/cron
2355 ? Sl 0:00 /usr/sbin/pcscd
2369 ? Ss 0:00 /usr/sbin/sshd
2394 tty1 Ss+ 0:00 /sbin/getty 38400 tty1
2395 tty2 Ss+ 0:00 /sbin/getty 38400 tty2
2396 tty3 Ss+ 0:00 /sbin/getty 38400 tty3
2397 tty4 Ss+ 0:00 /sbin/getty 38400 tty4
2398 tty5 Ss+ 0:00 /sbin/getty 38400 tty5
2399 tty6 Ss+ 0:00 /sbin/getty 38400 tty6
2400 ? Ss 0:00 sshd: root@pts/0
2402 pts/0 Ss 0:00 -bash
2495 ? Ss 0:00 /usr/local/bin/oscam -b -c /usr/local/etc
2498 ? S<l 0:00 /usr/local/bin/oscam -b -c /usr/local/etc
2541 pts/0 R+ 0:00 ps x
root@muta:~# /etc/init.d/oscam status
oscam
[FAIL] oscam is not running ... failed!

please advice
thx

Sent from my iPhone using Tapatalk

need some advice please. my debian server oscam is refusing to start. all is upto date.

root@muta:~# ps x
PID TTY STAT TIME COMMAND
1 ? Ss 0:01 init [2]
2 ? S 0:00 [kthreadd]
3 ? S 0:00 [ksoftirqd/0]
4 ? S 0:00 [kworker/0:0]
5 ? S 0:00 [kworker/u:0]
6 ? S 0:00 [migration/0]
7 ? S 0:00 [watchdog/0]
8 ? S< 0:00 [cpuset]
9 ? S< 0:00 [khelper]
10 ? S 0:00 [kdevtmpfs]
11 ? S< 0:00 [netns]
12 ? S 0:00 [sync_supers]
13 ? S 0:00 [bdi-default]
14 ? S< 0:00 [kintegrityd]
15 ? S< 0:00 [kblockd]
16 ? S 0:00 [kworker/0:1]
17 ? S 0:00 [khungtaskd]
18 ? S 0:00 [kswapd0]
19 ? SN 0:00 [ksmd]
20 ? S 0:00 [fsnotify_mark]
21 ? S< 0:00 [crypto]
24 ? S 0:00 [kworker/0:2]
110 ? S 0:00 [khubd]
129 ? S< 0:00 [firewire]
130 ? S< 0:00 [ata_sff]
133 ? S 0:00 [scsi_eh_0]
134 ? S 0:00 [scsi_eh_1]
135 ? S 0:00 [kworker/u:1]
136 ? S 0:00 [kworker/u:2]
137 ? S 0:00 [scsi_eh_2]
138 ? S 0:00 [scsi_eh_3]
139 ? S 0:00 [kworker/u:3]
140 ? S 0:00 [kworker/u:4]
175 ? S 0:00 [jbd2/sda1-8]
176 ? S< 0:00 [ext4-dio-unwrit]
311 ? Ss 0:00 udevd --daemon
374 ? S 0:00 udevd --daemon
375 ? S 0:00 udevd --daemon
403 ? S 0:00 [scsi_eh_4]
404 ? S 0:00 [usb-storage]
426 ? S< 0:00 [hd-audio0]
432 ? S< 0:00 [ttm_swap]
448 ? S 0:00 [kworker/0:3]
452 ? S 0:00 [kworker/0:4]
453 ? S 0:00 [kworker/0:5]
457 ? S 0:00 [kworker/0:6]
1227 ? S 0:00 [jbd2/sda9-8]
1228 ? S< 0:00 [ext4-dio-unwrit]
1232 ? S 0:00 [jbd2/sda8-8]
1233 ? S< 0:00 [ext4-dio-unwrit]
1234 ? S 0:00 [jbd2/sda5-8]
1235 ? S< 0:00 [ext4-dio-unwrit]
1236 ? S 0:00 [jbd2/sda6-8]
1237 ? S< 0:00 [ext4-dio-unwrit]
1513 ? Ss 0:00 /sbin/rpcbind -w
1549 ? S< 0:00 [rpciod]
1551 ? S< 0:00 [nfsiod]
1558 ? Ss 0:00 /usr/sbin/rpc.idmapd
1827 ? Sl 0:00 /usr/sbin/rsyslogd -c5
1851 ? S 0:00 [flush-8:0]
1858 ? Ss 0:00 /usr/sbin/acpid
1894 ? Ss 0:00 /usr/sbin/apache2 -k start
2019 ? Ss 0:00 /usr/sbin/cron
2355 ? Sl 0:00 /usr/sbin/pcscd
2369 ? Ss 0:00 /usr/sbin/sshd
2394 tty1 Ss+ 0:00 /sbin/getty 38400 tty1
2395 tty2 Ss+ 0:00 /sbin/getty 38400 tty2
2396 tty3 Ss+ 0:00 /sbin/getty 38400 tty3
2397 tty4 Ss+ 0:00 /sbin/getty 38400 tty4
2398 tty5 Ss+ 0:00 /sbin/getty 38400 tty5
2399 tty6 Ss+ 0:00 /sbin/getty 38400 tty6
2400 ? Ss 0:00 sshd: root@pts/0
2402 pts/0 Ss 0:00 -bash
2495 ? Ss 0:00 /usr/local/bin/oscam -b -c /usr/local/etc
2498 ? S<l 0:00 /usr/local/bin/oscam -b -c /usr/local/etc
2541 pts/0 R+ 0:00 ps x
root@muta:~# /etc/init.d/oscam status
oscam
[FAIL] oscam is not running ... failed!

please advice
thx

Quote from able2

some have prob read another forum someone has stated they have HD miovies working again, and will release in 3-5 days, all from a xml file??? ........ ill eat my words if and a big IF it is true and working

this is not jokes section but must admit very funny

suprised sports still 100%

Don't think will work. I stand corrected.

Sent from my iPhone using Tapatalk

internet in Kenya is not capable its very slow. I don't think if its possible to share dstv or ad cards as they are both paired to receiver. any experts to correct me?

Is it possible to get signal of 7w Arica beam in east London ? If yes, what size dish is required? Thanks.

Sent from my iPhone using Tapatalk - now Free

You need to read my friend. Check all tuts that say how to... First try and understand what is cs. I suggest cccam is the easiest of all for a newbie.