Posts by fevgatos

  • SkyQ Skin by Chababu

    Quote from Taximonkey

    OK thanks for the info. Its a shame cos it took me a while to get it set up just right and with that skin it looks excellent.
    Anyone know how to change the skin to 1.4 without having to reinstall the full image again.
    Thanks.


    Hi mate , you can deleted it ,and reinstall other version without reinstall full image again ,I got both them SKY NEW latest ,and skyq,


    /usr/share/enigma2 the deleted the folder with skyQ,


    regards Nick

  • cable tuner proble

    [quote='twotabs','https://linuxsat-support.com/index.php?thread/&postID=362867#post362867']hi nick im in ireland using vm, i know i dont have net id but when i scan using cablebrutforce i get all vm channels,plus i have all freq so i can manualy put them in and still get missing sd channels saying tuned failed,but when i put single cable tuner back in do scan on cablebrutforce 6875-6900 i get all vm channels back and all viewing non saying tuned failed i thick problem with twin tuner maybe band width like when i manually tune freq 418000- 428000 on single tuner tunes fine on the twin tuner says tuned failed on them freq cheers[/QUO


    Hi mate, i got the same box you have , but here in uk. we have net id as well, and i use to scan ABM it take 2 minutes maybe less ,i use OPENPLI ,So you have add 2 hybrid tuners at VU DOUO 2,I dont think is tuner ,the are genuine and the are good ,why not try like this,on screen shot,but still you need NET ID ,I am not VM engineer ,if is for satellite yes ,


    Regards Nick

  • cable tuner proble

    Quote from twotabs

    hi nick did scan took 1 and half hr and still 80 channels missing say lifetime animal planet i do cablebrutforce scan on my freq and tunes in everything notice tonight freq418 on twin cable tunner wont tune but on single cable tuner it will i have tuner c-d both set to cablebrutforce 6875-6900 after auto cable scan i have manual freq too which i scaned and didnt pull the other 2 channels i said earlier i was missing this is for c-d tuners both set this way cheers thick something up with tuner dont have net id for were i am use cablebrutforce gets everything in on single cable tuner but not this twin one958dcfd55c7daf9208.jpg


    Hi mate ,yeah i can see ,sorry for asking, what cable provider is yours , cablebrutforce are many ,you still missing your NET ID, and i can see you don't have ABM


    Regards Nick

  • cable tuner proble

    Quote from twotabs

    hi guys in ireland using vu duo2 using obh image getting 175 channels on single cable tuner which is the amount we have , got twin cable tuner installed now i did scan only getting 80 channels weird, tryed different image now vix and still only pulling in 80 channels on twin cable tuner,so stuck single one back in 175 cable channel any ideas is there something missing like a config or something cheers


    Hi mate ,the tuners must work perfect,i think the configuration must be ok , other way you will not get nothing, make screen shot your tuner configuration and upload here , and we can see, try AutoBouquetsMarker how many channels will get, when you do scan ,


    regards Nick

  • MAG 254 - channels stops working after 10 seconds HELP

    Quote from ZagorTN

    Hi newbie here need HELP.
    I just got MAG254 couple days ago and i have tried to put in some m3u playlist.
    Everytime i start any of channels from playlist it works for about 10 sec and shuts down. I have tried couple different m3u playlist with same results.
    Buffer is around 3000ms and i have changed DNS to 8.8.8.8.
    Connections is 100/10mb, fiber IPTV.


    PLS Help


    Hi mate , better use portal , not the m3u playlist ,

  • buy dm800se Hd or dm520???

    Quote from abu baniaz

    If buying a new receiver, I would not be invest in the 400MHz CPU receivers. They are very old.


    Me to mate , if i buy i will choose Miraclebox Premium ULTRA, Premium ULTRA is one of the fastest receivers on the market (2 x 1300 MHz) with up to three tuners, OLED, Full HD and Bluetooth support.


    regards Nick

  • Zgemma H2.H with Virgin Internet No Virgin TV

    Quote from stevo88

    So i currently have a vu solo2 but thinking of switching to a Zgemma H2.H for the HD. I have virgin media internet but my box at the wall only has 1 cable coming out of it which goes straight to my router. How do i connect the Zgemma H2.H and will it work as iv not set up any TV with virgin?


    Also do i connect 1 satellite line from dish and 1 cable line to the H2.H and add a sat sea lion and cable sea lion? Once this is done is functionality on the box same as with a H2.S but just with HD available?


    1)Hi mate, sorry to bother you, my opinion is,keep VU+SOLO2 Then buy VU+ Turbo USB Tuner DVB-C/T2,and you don't need Zgemma H2.H, Zgemma H2.H never have quality of VU+SOLO2 ,so you got after DVB-S and DVB-C one same box ,
    2)for the source of cable ,you need 2-3 Way Cable Splitter for Virgin Media,then you are full of 2 provider plus you got VM HD,
    This is my opinion mate ,


    regards Nick

  • OpenPLi4-oe2-800se-sim2-2015-04-22-sam backup


    Hi mate , for what kind of reason you buy the box , for DVB-S or DVB-C, explain more info, if you bought it for cable, that box if fine , you have to confing it for your country cable provider, if you bought for satellite, that box wont work , you need to buy DVB-S Tuner, then reflash again ,then conifing you tuner ,with single lnb, multy lnb, or motorise system what ever you want , then send all the channels buy dreamset , please let ask know ,


    regards Nick

  • Dish Size increase if Multiswitch added to setup ?


    Hi mate , you need Inverto Quad ULTRA L.N.B,and Labgear Enhanced Multiswitch dependent how many feeds you want ,


    regards Nick

  • mg camd and pli 4.0 ,cant open channels ?

    Quote from patch

    i have dreambox 500 HD running open pli 4.0 , i have downloaded Mg camd 1.38 from plugins and tried to use an N line in the newcamd.list , but nothing opens . how can i tell if Mg camd is running on the DM 500 HD . When i go to softcam setup and MG camd is at the top , when i highlight it and press green button to ok it , i get message saying Softcam setup... . and this stays on screen . is this correct or is Mg camd not installing ? thanks


    You need the mg_cfg { e2 }

  • [DOWNLOAD] SLY.NEW Skin with Cool TV Guide For Open Pli, Open ATV or HD freaks

    Quote from tarizo41

    I have installed your fabulous skin on my openblackhole 0.1 vu+ duo2, ¡t works very well but i can ,t see information about ecm time anywhere nor infobar nor second infobar ..thanks for your work


    Hi tarizo41, that's al right , don't have on sky image genuine ecm , this mean you have one of this sky skin install on your box , this isn't very important ecm, you can find other way to see it ,


    regards Nick

  • [DOWNLOAD] SLY.NEW Skin with Cool TV Guide For Open Pli, Open ATV or HD freaks

    Hi mate, thanx for quick respond , is not extract when i telnet the ipk , i reflash the box again but not ,
    this is all ,i just istall the 2.3 verision again ,please let me know if you can . :72::72::72::72::72:



    regards Nick


    - - - Updated - - -


    Hi Chababu, thanx a lot mate for your support ,i manage to make it work after so trying,cause when i telnet it the cannot extract , what i don i install the ipk file , the telnet with command but not successful, then i extract the ipk file with 7-zip the get the sky new 2.5 folder and send it to usr/share /E2 then restart E2, now is working,


    thanx a lot mate


    regards Nick

  • [DOWNLOAD] SLY.NEW Skin with Cool TV Guide For Open Pli, Open ATV or HD freaks


    Hi Chababu, thanx for you great job , we appreciate what you do, i use to have the last sky skin V.2.3 on VU+DUO2 Openpli image no prob e toll , and i was try the latest one , but something goes wrong , i delete the old folder ,ftp /usr /share/enigma2/, reboot the box , then install the v2.5 , i put ipk on temp the telnet it , install successful, but when i go to choose the skin ,there isn't on the skin folder the skin i install , is anything we can do , cause at moment come back to v.2.3, ,anyway is anything we ca do , please let me know

    regards Nick