Is it possible to do online update or we must flash new image ?
The author of the image did not give any recommendations, I think that you can update online and reinstalling is not required
Posts by hecha71
-
-
my solution, I put a 120 mm Noctua fan on the top cover, temperature max 45 degrees
everyone solves the CPU cooling problem the way they can or as they think is right.
-
dm920 - Python 3.12.4 - openpli-develop - homebuild ! 20240720 From Satpong
- Python 3.12.4, GCC 14.1, OpenSSL 3.3.1
- ServiceApp, FFmpeg 7.0.1, GStreamer 1.24.5
- Ciplus, OScamstatus, OScam 11809
- OpenWebif, EPG-Import, File Commander, YouTube 1220
- blindscan, cablescan, fastscan, terrestrialscan
- feed dm920/drivers/settings/picons/skins/plugins -
What is the CPU temperature on your Dreambox 920? I'm using an Openvix 6.6 image and it shows 71 degrees for me.
Bro, it's not about the images, look at the different images, the temperature difference is plus or minus 2-3 degrees. The reasons why 4k content is currently working, of course, is that the temperature will be higher if the satellite channel is lower, much depends on the load on the processor cores.When I bought the receiver, it was about the same - from 70 to 86 degrees. The first thing I did was disassemble the receiver, and it turned out that during assembly one of the radiator mounting bolts was not twisted by almost one turn. When I tightened the bolt, the temperature did not rise above 65, but then I installed a cooler from dream 800se. And you can see it at the moment in the screenshots.. But everything you do yourself is at your own risk... Good luck!!!
-
dm920 - Python 3.12.4 - openpli-develop - homebuild ! 20240716 From Satpong
to prevent a blind scan crash, replace the file List.py along the way /usr/lib/enigma2/python/Components/Sources and restore Enigma-everything works.. Many thanks to Dorik1972- pepsik for the hint.
From Satpong - "Thanks, lines added and included in online image upgrade"
upgrade from menu =
Menu - Setup - Software update
or
Menu - Plugins - Software management - Software update
telnet command =
opkg update && opkg upgrade -
Good evening folks.,Just installed this Image,but cant download nothing from Pugins ,and got this message......error:opkg download_backend:Failed to download.
Come on, are you sure about what you wrote? look at the screenshots, and if you don't succeed, then go and put this dumpster - DM920UHD : OpenPLi 8.xStar 20240718 GSt 1.20.5 and download the plugin for yourself there for sure everything is there
Everything is clear to me, either you do not understand how to use telnet or you are a troll sent by toysoft to spoil other people's topics.
But thanks anyway, let all users look at the truth.
-
I used 7zip programmes to change the format and solved the problem
Well done... created the problem myself and solved it myself
-
I got it from the link you provided
Where will I get it?
How strange you areThe whole issue is closed..
-
Look at the official images of all the teams showing ..openatv && egami && pure2
They are all in tar.bz2 format we communicate like a blind person with a deaf person -I ask you again where did you get what is highlighted in yellow in your screenshot?..all the images that I or the author of the image posted in the public in the tar.gz format which is a plugin Barry Allen understands perfectly.And let 's get to the point , and the fact that that archive with the image has been downloaded or re - archived somewhere by you or someone has nothing to do with this topic ,
-
I'm not talking about dcc
Enter through Barry Allan as the image will not appear for you to installbecause the file format isn't tar.bz2
Well, I'm telling you the same thing......of course, Barry Allen does not understand the tar format from where you got it in this format, I have 2 versions, the first one I outlined in my previous message, the second option someone once again packed the image in tar.bz2 format into an archiver and it turned out to be an archive in the archive.That is, in tar image in tar.bz2 format
Bro, I have no idea where you got what you highlighted in yellow, all the images that the satpong compiles and provides with the public are in the correct format.
-
The file format ( tar ) is not recognized by the plugins barryallan
It should be like this tar.bz2
Dear, here in the screenshot is everything that is quietly installed in barry Allen without any problems, except that it is highlighted in red-this is an image backup made by the barry Allen plugin when the image was open pli. Before installing a new image or creating a backup of an existing image, you need to switch to the image that you installed in the receiver's flash memory, that is, to the dream OS image.And from this image, install any image or make a backup.Good luck!!!
-
Does FBC Tuner support blind scan, yes or no?
Brother, I do not know the answer to your question because I do not have such a tuner in my receiver, I'm sorry.If you have such an opportunity, then check on your receiver.
-
thanks again.
Many thanks to - pepsik
-
Hi,
blind scan does not work on my device
I have fbc tunerI think the tuner has nothing to do with it, but to accurately judge, you need a crash log. that's where my blind scan fell into the crash, everything is fixed. if your receiver falls into a crash after replacing the file, you need a crash log.
-
I replaced the blindscan files but the result is the same but I 'll keep on trying and if I find out anything helpful I'll share it here,thanks.
to prevent a blind scan crash, replace the file List.py along the way /usr/lib/enigma2/python/Components/Sources and restore Enigma-everything works.. Many thanks to Dorik1972- pepsik for the hint.
-
dm920 - Python 3.12.4 - openpli-develop - homebuild ! 20240716 From Satpong
- Python 3.12.4, GCC 14.1, OpenSSL 3.3.1
- ServiceApp, FFmpeg 7.0.1, GStreamer 1.24.5
- Ciplus, OScamstatus, OScam-emu, OScam 11805
- OpenWebif, EPG-Import, File Commander, YouTube 1220
- blindscan, cablescan, fastscan, terrestrialscan
- feed dm920/drivers/settings/picons/skins/pluginsopenPLi-Py3-dm920-20240716.tar.gz
-
Is it possible to make the plugin work without the service app?
-
you can't do anything other than criticize, if I hadn't read would the files and bouquets have been installed, my advice to you is - if you can't help - at least don't get in the way, leave it to people who know what to do
I will delete this plugin because I have convinced myself that there is no point in wasting my time anymore
I suggest if you read and did not understand anything, check the link on your computer -this is the first thing to do-if the channels do not work, then DNS substitution in the network or VPN plug-in. if the app service opens, install the system plugin and try to change the playback player. and most importantly, where is the login of the plugin that you were supposed to show here?
Good luck!!!
P.S. When the author makes this plugin paid, then you can even shout and demand. And everything is based on the author's enthusiasm, so it's a voluntary matter if you don't want to use it.
p.s.s.I am working with DNS substitution because there is a fight against piracy and the Internet provider blocks any third-party links and addresses, although the first versions of this plugin worked without any manipulation of the settings in the image.
in the last screenshots, everything works with these settings.The image does not matter, it works on any image that is installed in my multiboot.
Good luck!!!
-
more than 3 hours, I can't get a specific answer, this is not normal
Dude, you need to read the topic from the beginning -it has all the answers to your questions, but you're too lazy to read.
and I perfectly understand the author, he was tired of poking his nose into the posts of this topic where all this was solved.And more. where is the log of the plugin that you had to show the author?
-
my good friend hecha71 if you don't like (totally respectful this) go to something else...don't get stuck there are so many other options buddy
I understand perfectly well that you are tired of raking the topic according to the author's complaints, it's not that I don't like this image, but in the position of the author, who misleads users and tells lies.And on my post, which explains how to solve the problem, he writes all sorts of nonsense. DM920UHD : OpenPLi 8.xStar 20240319 GSt 1.20.5 That's how simple it is to solve the problem with the normal operation of his image in the barry allen multiload plugin.But for some reason, I and the barry Allen plugin are guilty of this.
If I'm wrong about something, I can always admit my mistake and apologize, which I wish everyone.
