Posts by hecha71

Quote from hamihoo

Hi, i bought new DM920 UHD. I want to flash OpenATV 6.5 pure image, not backed up (like openatv-6.5-vuultimo-20210418_usb.zip) on this site http://images.mynonpublic.com/…5/index.php?open=vuultimo ........ To my DM920, is it this image on this site is safe to flash it to DM920 directly to the internal flash? please i need advise before i flash it. Thanks

only a fool will fill in images from the alliance or similar ones in dreamboxes 9xx in the internal flash, if you want to restore the receiver later, then fill in .And for such images there is a BA plugin, it's up to you of course

Quote from spartaco

all cams don't work, before putting jobs around please try them first thanks

everything works, look for the problem in your configs cams

Взаимодействие с другими людьми

Quote from uncinogb

openpli-enigma2-8.0star-dm500hd_Japhar_v6_GStreamer_1.18.3_20210227

This image is installed without problems, but it does not start, and the reason for this is Sim Japhar, I do not see any other reason

Quote from seagen

Install this servicepack and the lcd should now work in standby modus

Great job! After the update, the display in standby mode works as it should, Thank you!!!

Quote from uncinogb

How do you install with the usb? Do you install the image first and then a memory expander pugin to allocate memory on the usb?

the first thing I did was modify the receiver(everything is in the screenshots and under the spoiler, the truth is in Russian, I think it will not be difficult to translate using Google translator), and then you can install any normal image for this model and, of course, the flash expander plugin

The DM500HD has a standard USB remote connector, but the USB controller is set to

the disabled state because it misses the 5V overcurrent protection on

the pin (max1823 on the DM800 for example), and therefore does not meet

the USB specification.

By removing a resistor (or two), you can enable chip support, but connecting USB devices will be rough, there will be no current protection over the 5v supply. You can

imagine what might happen.

Removing the resistors means that you will lose the warranty and everything that happens after that will be at your own risk, no one will take responsibility for

your actions.

My receiver only had one resistor R1011 (0 ohms), however, in case you have

there is also R1010, you should delete both.

all links are broken, what did you throw garbage on the forum?! I can't download the image!!!

Guys, I made a revision of the receiver, because with the new images in the receiver there is not enough memory and you need a USB port to expand the memory. Under the spoiler all the information

Quote from uncinogb

Hi, is this image for original sim? I have an A8P sim which is supposed to be identical to original. Would it work on it?

Many thanks

Hi, I have an 800se with the same A8P simulation-all the images for the a8p are installed and working without problems, so you can install and on the 500hd images for the original with your A8P simulation

Quote from emosim

We are building a new version 8.0star, with more recent libraries, perhaps that one will be even better ;o), but still a lot of work to do. The OpenPLi 7.3star is already working well, but plugins for DMM images will have difficulties to work, still if its the same OE (Pyro).

Emo

I recommend trying this plugin https://gisclub.tv/plaginy-585…dorik1972)-chast-2-84859/

Quote from jocke90s

Hi.
Do you know Any better image that works better with dreambox one?

any image of a dream os, Merlin, Peter Pan, Dream Elite, NN2...

Quote from Melgas

Я использовал несколько вариантов: пользователь и пароли. Безуспешно.

а в образе пробовали установить пароль? меню-настройки-системный пароль

Merlin 01.04.21

:rasta2bigsmoke0gf1:

900- https://feed.dreamboxtools.de/…erimental-20210401.tar.xz

920- https://feed.dreamboxtools.de/…erimental-20210401.tar.xz

Quote from Melgas

Thanks for the information.

So I will do: I will install PeterPan (OE2.5).

But I only find Image of 2018.

Quote from Melgas

DM920UHD-4K

Мерлин-4 OE2.5

I do not recommend installing this image, it has not been updated for a long time, the team believes that not enough changes have passed to do something..

from the images of dream OS current: official image, NN2, Dream elite, PiterPen:rasta2bigsmoke0gf1:

I never use such tuner settings in the receivers on the Enigme2 as you have in the photo

I would set the tuner settings this way and no other way

look at my screenshot

1 advanced mode

2 satellite-30w, lnb-1, Diseqc -1.0 Committed diseqc command-AA

satellite-13E, lnb-2, Diseqc -1.0 Committed diseqc command-AB

satellite-19E, lnb-3, Diseqc -1.0 Committed diseqc command-BA

Взаимодействие с другими людьми

Quote from soomar

Followed instructions getting same error .

you will create BarryAllen before Christmas with your own methods

you were given a link.. install the gutemine channel, prepare, format the section where you will install the BarryAllen plugin ... And from the gutemine channel install BarryAllen

why it is better to install from the gutemine plugin - because all the rights to the BarryAllen plugin belong to-Gutemine

Взаимодействие с другими людьми

Quote from soomar

Hello I was getting the below error while trying to install BarryAllen on Dm 900 uhd

Barry Allen MultiBoot Plugin installation error on Dreambox DM920

BIOS

do all the manipulations with the receiver to get the ip address, then on the computer in the command line enter telnet xxxxx and click on the keyboard input you get into the bios there activate flesh sector recovery-enabled

Quote from wika

Blackhole 6.4 BH DM920 OE2.5

http://tunisia-dreambox.info/R….4-20200923-dm920_web.zip

today I switched to this build-an online update arrived..after the update and reboot, the receiver started with the default skin. I chose skin BH everything is fine ..check with yourself what changes were made to the image after the update

Quote from felix dias

how transfer to image ?

unzip the archive anywhere on your computer connect the receiver and the computer via FTP with the DCC or Total commander program and move the display folder to the specified path in the post above

P.S. here is another option in the archive there is a large selection of display skins..you can change the Menu-Settings-User interface-Receiver display-Skin