Card this in CAK7 new session key pairing : Nagra Merlin
OScam Public not support .. ECM encrypted
Card this in CAK7 new session key pairing : Nagra Merlin
OScam Public not support .. ECM encrypted
Hi
Please your can said me how can send cache from CSP to OScam
Config in CSP and Config in OScam
Thank
It's very doubtful that you will find an answer to your question here..... this forum is mostly for European sats. The posting of keys is not allowed on the forum as per the rules.......
The intention is not to publish keys, the intention if anyone knows how to extract the keys can lend that service, turn to you in europe because there are providers that have the same encryption system and you have more knowledge and experience and that's not helping South America.
Salu2
Hello
I am in search of private solution to the provider in South America
Telefonica Movistar Provider
Encryption: Nagra
CAID: 1861
Need service CWPK keys extraction and Oscam Private Version keys work with CWPK, is that there is a private version of that Oscam.
This is AZclass S1000 and AZclass S926 they not found with Newcamd ..
this receiver have Newcamd but not Found .. Only Found CCCAM ..
I need conected to CSP Server this receivers in CCCAM .. this receivers only Found with CCCAM Clients
Hi .
how can user cccam user with CSP Server
CSP only found Newcamd and Mgcamd
but need config for CCCAM clients
Please Thank
I regret to say that I still have the same problem, now that installing the driver is no longer displayed as OFF if not as shown in the picture
count again my problem ...
Oscam is working well .. there comes a time that the card stops sending CW valid user, you see the window of oscam and apparently this does not show the problem well, but is not sent cw user (not found).
way readers and reread button 7c81f435cb24a93beacf6e.jpg and see the reader as in the picture CARDOK (not entitlements) 9b8235a486712.jpg
I have to disable and re enable the reader to make the card work again .. this can happen 1-4 times a day and I'm desperate .. I need some solution
Linux PC
Intel Core i3
4 GB Ram DDR3
250 Hard Disk
Hub USB DLink 7 Port
Readers = Omnikey 3021 - 3121
Linux Debian 6.0.7 - 64 Bits
Oscam SVN - 8917
############################################################
OSCAM GLOBAL
Web interface support: yes
Touch interface support: no
SSL support: no
DVB API support: no
Anti-cascading support: no
I***** guessing: no
Debug mode: no
Monitor: no
Loadbalancing support: no
CW Cycle Check support: yes
LCD support: no
LED support: no
IPv6 support: no
Cache exchange support: yes
camd 3.3x: no
camd 3.5 UDP: no
camd 3.5 TCP: no
newcamd: yes
CCcam: yes
CCcam share: yes
Pandora: no
ghttp: no
gbox: no
radegast: no
serial: no
constant CW: no
Reader support: yes
Nagra: yes
I*****: no - no EMM support!
Conax: no - no EMM support!
Cryptoworks: no - no EMM support!
Seca: no - no EMM support!
Viaccess: no - no EMM support!
NDS Videoguard: no - no EMM support!
DRE Crypt: no - no EMM support!
TONGFANG: no - no EMM support!
Bulcrypt: no - no EMM support!
Griffin: no - no EMM support!
DGCrypt: no - no EMM support!
cardreader_phoenix: no
cardreader_internal_azbox: no
cardreader_internal_coolapi: no
cardreader_internal_sci: no
cardreader_sc8in1: no
cardreader_mp35: no
cardreader_smargo: yes
cardreader_pcsc: yes
cardreader_smartreader: yes
cardreader_db2com: no
cardreader_stapi: no
###################################################
OSCAM CONFIG.
[global]
loghistorysize = 4000
logfile = /var/log/oscam/oscam.log
clienttimeout = 3000
fallbacktimeout = 2200
clientmaxidle = 0
nice = -1
maxlogsize = 10000
preferlocalcards = 1
dropdups = 1
block_same_ip = 0
block_same_name = 0
usrfile = /var/log/oscam/user.log
cwlogdir = /var/log/oscam/cw/
emmlogdir = /var/log/oscam/emm/
ecmfmt = c=p=s=l
[cache]
max_time = 12
cwcycle_check_caid = 1861
[newcamd]
port = 9999@1861:007311
key = 0102030405060708091011121314
mgclient = 1
[cccam]
port = 2560
nodeid = 0BBBE89B10A5214A
version = 2.0.11
[webif]
httpport = 29000
httpuser = xxxxx
httppwd = xxxxx
httprefresh = 10
httphideidleclients = 1
httpallowed = 10.0.0.2,10.0.0.3,10.11.11.2,0.0.0.0-255.255.255.255
##########################################################
OSCAM SERVER
[reader]
label = card3
protocol = pcsc
device = 2
caid = 1861
boxkey = xxxxxxxxxxxxxxxxxxxxxxxxxxxx...
rsakey = xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx.....
ecmwhitelist = 1861@007311:89
detect = cd
ident = 1861:000000,007311
group = 3
emmcache = 1,3,2
blockemm-unknown = 1
################################################################3
OSCAM USER
user = card3
pwd = 123
description = card3
group = 3
#################################
Thank You by Help
would like to know how information .. omnikey few linux I can connect to PC?
follow the instruction to download the driver from the official website of omnikey and so far is working perfect.
hopefully it stays like that,
thanks to everyone that your opinions may contribute to the solution of my problem .. this is a great forum with the help of all of you
The problem is very easy to fix mate, this commonly happens with N3 cards when people use the default pcsc drivers... go onto the omnikey's official website and download their drivers for your omnikeys, install and reboot, problem solved. I had sthe same problem with my N3 Rom 142's.
could you give me the instruction to install the drivers
thanks
I tell them that the debian install and update to the latest version of oscam, especially in this day, it worked well for 2 hours and again the problem continues
I used.. omnikey 3121 and 3021
the card may be saturated and off ?
Nagra 3 card...i would recommend you use sbox with your card but if thats not an option then which version of oscam are you currently using as i would update it to the latest binary and see how that goes.
I take it this does work albeit temporary so your camid/boxkey and rsa are all correct?
MK
Hi
CAMID is OK
BOXKEY is OK
RSA is OK
I have installed Simplebuild script and I update one time by week ... In this moment have oscam svn-8886 update today
and have same problems
Hi..
oscam I have the problem that after a few hours of run good comes time card is disabled or off, but appears OK Card or reset the card appears in the OFF state (XX entitlements). look picture
then I have to remove the card and re-introduce readers to return to work well, spend a few hours and come back and feel the same, the order is irrelevant but all have problems, but not all the time
I have Linux PC
Ubuntu 13.04
Intel Core i3
4 GB Ram
Hard Disk 250 GB
Help me please
Thank you
Hi
I have 2 card with same company Telefonica Colombia and Telefonica Brasil
CAID 1861 Telefonica Colombia
CAID 1802 Telefonica Brasil
same Provider ID 007311 for the 2 brasil and Colombia
as I configure oscam to work with two CAID different of the same company ??
thank by help