thats some result
Posts by kianiadnan
-
-
hi Lizard
i have installed today on pli image latest
and its showing in menu same like picture nord vpn connector 3%
but when ever i select country then left side 1% or 4% tcp or udp some message come after some time when i traslate this its says not available try another may i am wrong but it is come in diffrent language kindly help me from there how i setup nord vpn please
-
NordVPN-Connector v 0.3
Function extension:
Representation of the respective server load
Optional presentation of the plugin in the menu
Optional presentation of the server load in the menu
Display if Killswitch is active
Display of the currently used public IP address on the Internet
Page-by-page scrolling with Page buttons now possible
Various fixes regarding killswitch
Other fixes
Under Settings, additional options have been added:
Show plugin in the menu:
This will display the plugin "NordVPN Connector" in the menu area for quicker selection,
For this setting to take effect, a GUI restart is necessary.
Show server usage in the menu:
With this setting you can display the current utilization of the currently used server in the menu item.
This point is currently marked as "Experimental", since the current load of the server is determined at the menu call,
there may be a momentary delay in the display of the menu, but this also depends on which VPN server (country) is currently being used,
the delays have different effects.
This point is to be regarded as "Nice to have", who has problems with it or who it bothers, can / should disable this setting.
List sorted by server load:
This will sort the server selection list in ascending order of server load, to help make selecting a suitable server faster.
Screenshot of the menu:
Screenshot of server selection (sorted):
In the open server selection above, the view of the server loads is updated every 60 seconds and sorted accordingly when sorting.
Thanks LizardNordVPN-Connector v 0.3
Function extension:
Representation of the respective server load
Optional presentation of the plugin in the menu
Optional presentation of the server load in the menu
Display if Killswitch is active
Display of the currently used public IP address on the Internet
Page-by-page scrolling with Page buttons now possible
Various fixes regarding killswitch
Other fixes
Under Settings, additional options have been added:
Show plugin in the menu:
This will display the plugin "NordVPN Connector" in the menu area for quicker selection,
For this setting to take effect, a GUI restart is necessary.
Show server usage in the menu:
With this setting you can display the current utilization of the currently used server in the menu item.
This point is currently marked as "Experimental", since the current load of the server is determined at the menu call,
there may be a momentary delay in the display of the menu, but this also depends on which VPN server (country) is currently being used,
the delays have different effects.
This point is to be regarded as "Nice to have", who has problems with it or who it bothers, can / should disable this setting.
List sorted by server load:
This will sort the server selection list in ascending order of server load, to help make selecting a suitable server faster.
Screenshot of the menu:
Screenshot of server selection (sorted):
In the open server selection above, the view of the server loads is updated every 60 seconds and sorted accordingly when sorting.
Thanks LizardNordVPN-Connector v 0.3
Function extension:
Representation of the respective server load
Optional presentation of the plugin in the menu
Optional presentation of the server load in the menu
Display if Killswitch is active
Display of the currently used public IP address on the Internet
Page-by-page scrolling with Page buttons now possible
Various fixes regarding killswitch
Other fixes
Under Settings, additional options have been added:
Show plugin in the menu:
This will display the plugin "NordVPN Connector" in the menu area for quicker selection,
For this setting to take effect, a GUI restart is necessary.
Show server usage in the menu:
With this setting you can display the current utilization of the currently used server in the menu item.
This point is currently marked as "Experimental", since the current load of the server is determined at the menu call,
there may be a momentary delay in the display of the menu, but this also depends on which VPN server (country) is currently being used,
the delays have different effects.
This point is to be regarded as "Nice to have", who has problems with it or who it bothers, can / should disable this setting.
List sorted by server load:
This will sort the server selection list in ascending order of server load, to help make selecting a suitable server faster.
Screenshot of the menu:
Screenshot of server selection (sorted):
In the open server selection above, the view of the server loads is updated every 60 seconds and sorted accordingly when sorting.
Thanks Lizard -
hi
i am running open pli at vu ultimo 4k kindly help me to install patch for sky de etc.
i tried so far but nothing is working for me
i am looking working osacm with icam patch and kindly step to step guide best regards
-
many many thanks its sorted you are awesome
This is just debug information.
The png file is corrupted. The pngs must be a full 32bit or an compressed 8bit png.
That png has been corrupted before so probably found it's way back into the .ipk file
extract the attached .zip file and with ftp copy to folder
usr/lib/enigma2/python/Plugins/Extensions/JediMakerXtream/skin/fhd/default/images
Overwrite the progress.png file and problem should be solved
This is just debug information.
The png file is corrupted. The pngs must be a full 32bit or an compressed 8bit png.
That png has been corrupted before so probably found it's way back into the .ipk file
extract the attached .zip file and with ftp copy to folder
usr/lib/enigma2/python/Plugins/Extensions/JediMakerXtream/skin/fhd/default/images
Overwrite the progress.png file and problem should be solved
-
hi there
i have installed it in vti enigma 2 distribution it says error please find attached in picture kindly advice how i fix that please
-
no problem :) enjoy it :)
kindly get me advise for best image best you think in your opinion please
i mean best enigma 2 distributor for example vti or pli or atv or black hole etc.
-
i am really thank full
i am also fed up with o vix its really annoying
kindly suggest best customised image i will install and then try vpn etc.
manay ,many thanks
-
sorry not found with ifconfig also
that really weird
-
no error at all
it seems installtion goes ok but nothing happend after reboot no plugin installed named zer tier
-
i am sorry i do not knew you send me personal message
silly question where i can access personal msg i checked everywhere there no option i can check personal message anyway no problem
out come of installation
i checked every where its look zerotier not been installad i think i have may be issue in image nothing installed even after installation been completed succefully on ipks may be
-
Thanks
I have run newer version zerotier_1.6.5-r0.5_armv7ahf-neon.ipk)
Result are Below
rm /tmp/pkg-installed.tmp; echo ">>> DONE <<<";
rm: can't remove '/tmp/pkg-installed.tmp': No such file or directory
>>> DONE <<<
root@vuultimo4k:~#
Install Package:
Copy source file...
Transfer finished.
Install...
done.
###################################################################root@vuultimo4k:~#
-
1. you need to write what Enigma2 distribution you are using... not every Enigma2 distribution has this ZeroTier in its feed / server... although it has already been compiled to work under Linux set-top boxes, it depends on the compatibility of system libraries
2. VPN networks are not for IT illiterates... it is to neccessary to know yat least the simple knowledges about computer networking... unfortunately
hi
i am using open vix image vu ultimo 4k
-
1. you need to write what Enigma2 distribution you are using... not every Enigma2 distribution has this ZeroTier in its feed / server... although it has already been compiled to work under Linux set-top boxes, it depends on the compatibility of system libraries
2. VPN networks are not for IT illiterates... it is to neccessary to know at least the simple knowledges about computer networking... unfortunately
i am hoping little help as you are doing and really thank full i will be able to accomplished operation i am using VU Ultimo 4K image open vix
-
Hi dudes. I recommend to use a simple and free - ZeroTier. Just create your free account on the ZeroTier website. Only very small and negligible restrictions are used there !!! ZeroTier VPN works on all known platforms (including Linux and also Enigma2 set-top boxes). Join the ZeroTier VPN network is a matter of one command in Enigma2 (via the Linux Shell). Then just enable the new appropriate VPN client via the ZeroTier website (i.e. on the website with your ZeroTier account). VPN settings are also made via the ZeroTier website (in your free account).
thanks i have created basic account but not so technical so unable to install it on my box kindly when you time little explain please
-
what vpn do you use and where can i buy it for the price described a lifetime subscription ?
you can also answer me in pm
tank's
HI I HAVE TOLD BY ONE OF THREAD USER THAT YOU LATELY BOUGHT FASTEST VPN AND CONFIGURED IT FOR YOUR BOX KINDLY HELP ME TO CONFIGURE IT ALSO PLEASE AS I HAVE DIFFCULTY I HAVE FOLLOWED ALL INSTRUCTIONS BUT OPEN VPN NOT KEPT RUNNING AND ANOTHER ISSUE IS I AM UNABLE TOINSTAL IPK FOR OPEN VPN I HAVE MANUALLY CREATE FOLDER IN ETC AND PUT CONM FILE FOR TCP AND USER AND PASS KINDLY HELP
-
any other plugin or way to install
-
thats the result kindly help
rm /tmp/pkg-installed.tmp; echo ">>> DONE <<<";
rm: can't remove '/tmp/pkg-installed.tmp': No such file or directory
>>> DONE <<<
root@vuultimo4k:~#rm /tmp/pkg-installed.tmp; echo ">>> DONE <<<";
>>> DONE <<<
root@vuultimo4k:~#
Install Package:
Copy source file...
Transfer finished.
Install...
done.
###################################################################
-
i tried above strinmg not working for me please advice
root@vuultimo4k:~# wget http://nordvpnconnector.dd-dns.de/nvpnc-installer_ipk.s
-O - | /bin/sh
--2022-04-23 13:04:53-- http://nordvpnconnector.dd-dns.de/nvpnc-installer_ipk.
h
Resolving nordvpnconnector.dd-dns.de... failed: Name or service not known.
wget: unable to resolve host address ‘nordvpnconnector.dd-dns.de’
-
NordVPN-Connector Update Version 0.4 r12
Fix:
- fix problem ps command with zombie-processes in openatv
Hello and thank you for this plugin, really good for who wants to run nordvpn in enigma2, works flawlessly on Octagon sf8008....
may i have plugin for vu ultimo 4k box please