Posts by yortiz1979

Quote from abu baniaz

What worked?

One advice was to use 40980

The other was to go through all of them until you find one that works

to offer more help to this threat i have also test 40980 using TELWEST and also works fine. It does not work on exCW. Hope this could help the comunity and anyone on crystal palase/ croydon/ bromley area. Being said that with 40980 using TELWEST it found 580 channels only and if using ALL SYSTEM it only finds few channels. Using 40979 with ALL SYSTEM just bring few channels whilst using PURE 495. All this stest were performed this morning 10/05/18@8:45am

Quote from abu baniaz

What worked?

One advice was to use 40980

The other was to go through all of them until you find one that works

i sticketed to croydon 40979 and update the xml file and the turner worked and my vm bouquet were created. About my question if can i use update conf file from now or not what do you advise?

Quote from abu baniaz

As above, the surest method is to check on an official receiver.

Try 40980. Somoene else posted issues about 40979 on another forum, he was in 40980

If you cannot get official receiver, then you have to go through all of them one by one. I have adapted the provider file to have a frequency you posted. You should not get a tune failed message.

Extract the xml file,

transfer to /usr/lib/enigma2/python/Plugins/SystemPlugins/AutoBouquetsMaker/providers

Delete the providers.cache file in /usr/lib/enigma2/python/Plugins/SystemPlugins/AutoBouquetsMaker/providers/

In ABM select a net ID ,

Run ABM (make sure there is no no swap)

Select a different bouquet, go back to Entertainment bouquet.

Check If BBC 1, BBC 2, ITV, CH4 and CH 5 in that bouquet work. If they do, great.

If no, select a different NetID, run ABM, select a different bouquet, go back to Entertainment check the 5 FTA channels.

Continue until you get a NetID where the 5 channels work

Display More

Yesss!! GREAT!!

ABU you are star all channels work fine, checked bbc on entretainment bouquet and it works fine!!

quick question, shoud i perform from now one - UPDATE CONF FILE ? or NOT??

THANK you very much ABU na d i hope that this post help others facing the same problem!!

I only have two turner one for sat (A) internal + one for cable (B) = Vu+ Usb. When B is desable (A) works just fine! so defenetely is an issue with Turner (B)

Any way i will stick to your instructions!

Guys i can only thank you both of you gor all this great help! I guess i will have to try all these area code since i only have broadband only and i dont have any person that i could ask any question! I will try this new xml tomorow. Ight when back at home and will gove u some feed back. As for now the issue i have is that i keep having the message that the turner is not working with ABM if it responds with ABM im sure it will go fine! Thanks again

Quote from abu baniaz

Are you sure you are using the correct NetID?

im not sure what my net id is:

What is the most accurate way to know?

- i live in London Crystal Palace, on my VM contract the area code is 03

- on ABM the closest available area is croydon!

Could you please help me to identify my correct NETID??

Thx

Quote from abu baniaz

If you are sure that 40979 is your NetID, go to /usr/lib/enigma2/python/Plugins/SystemPlugins/AutoBouquetsMaker/providers

and edit the following file

cable_uk_virgin.xml

Change the frequency="411000" to any of the following

frequency="603000"

frequency="611000"

frequency="619000"

frequency="627000"

Delete the providers.cache

and then run ABM again.

ABM uses QAM 64 frequencies for tuning, although it will work on any frequency.

Display More

I FLLOWED ALL STEPS AND unless i did something wrong it does not work the ABM :(

Quote from abu baniaz

If you are sure that 40979 is your NetID, go to /usr/lib/enigma2/python/Plugins/SystemPlugins/AutoBouquetsMaker/providers

and edit the following file

cable_uk_virgin.xml

Change the frequency="411000" to any of the following

frequency="603000"

frequency="611000"

frequency="619000"

frequency="627000"

Delete the providers.cache

and then run ABM again.

ABM uses QAM 64 frequencies for tuning, although it will work on any frequency.

Display More

great i have all channels working through manual scan, im editting right now the file, only frequency 619000 was present on the xml file. i will run this later and give you a feedback. but so far really happy that you helped me and that i can also be of any help!!

Quote from abu baniaz

Virgin have been upgrading /changing pure areas. The frequencies change.

Change tuner config to UK, VIrgin All systems.

Remove Cable services:

channel up, green for satellite, highlight cable services, menu, remove cable services, restart.

Perform a scan, then restart, upload both lamedb5 and lamedb files to the thread.

Which NetID are you in?

Display More

Hi followed your steps and it founded 603 channels. closest area code is croydon 40979.

i have added the lamedb files

temp virgin uk cable.zip

Quote from pauldb

you mean a twin sat or twin cable??, or just 1 sat and one cable,,, have you turned the sat tuner off and see if ABM works?? with cable only,could be a driver issue as well with the external tuner, as for anything else,im at a loss

one sat and one cable. the one creating usues is the usb TURBO from vuplus. as said before has been working fine for three month until may the first that not all channels are working and cant perform ABM since im getting the message that the (FAILES TO TUNE VIRGIN(UK) on turner b.

please check the followin:

the turner is correctly configured

you can receive the specified frecuency

(turner b is the extrernal usb turbo from vuplus

hi pauldb yes i do have a twin turner, i have a vu+ zero 4k with latest OPENVIX which come with internal sat tunner and i bough the extrernal cable turner. it has been working fine since march and startet creating issues after may the first. Im aware that HD channels are not FTA and i have oscam in place. there are still channels that i can watch but some other when your click like bbcHD etc the led on the turner turns RED.

i have the same issue using openvix on vu plus zero 4k, this started after may 1st, i know sky made some changes dont know if virgin also made some changes too