don´t work with positioner,for me
Posts by felix dias
-
-
Already works very well
Many thanks
-
My friend ahmed gazye,many thanks
-
Sorry,d´ont clears for me
-
At this time the freeupdater plugin does not work on my dream900 with the pure2 flash
any suggestion??
-
I'm trying it in DM500HD
-
-
It's strange to me.
Try to flash with the image Newnigma2 900HD
-
Many thanks,my friend Dex
-
How can I download it?
-
Page Not Found:unhappy:
-
Yes, downloud
-
-
Try :
Quote4 files are below unzip andDisplay More
go in the folder you will see
bbc_pmt_starter.sh
bbc_pmt_v4.py
enigma2_pre_start.sh
dvbsnoop
use dreambox control centre
send all four files to /usr/bin
right click each file select attributes
tick 755
click ok
now we install the lamedb file
download and unzip the lamedb file
do not have a 27.5 channel on the tv
put it on any other channel while we copy the lamedb over
use dreambox control centre
using ftp go to /etc/enigma2/lamedb (the e2 folder where lamedb resides)
dont open the lamedb file
now click telnet in dcc to put commands in
type init 4
press enter on keyboard
that stops enigma2 running (fta channel freezes)
now click ftp in dcc again
and send the lamedb file to /etc/enigma2 on your box
overwrite the old one
attributes for the lamedb are 644
now click telnet in dcc yet again
type init 3
press enter on keyboard
that starts enigma2 (E2 reboots back to the fta channel you were on)
thats that bit done
now we need to install Cccam2.3.2
see post belowAttached Files
-
I see bbc 27.5ºw, but on DREAMBOX900hd.
-
I installed on my computer the file CP210x_VCP_Win_XP_S2K3_Vista_7_JapharFlasher_1.1.zip,
then I ran the JapharFlasher_1.1 program,
following the instructions here indicated by you
-
Yes - how did you install Japhar Flasher?
Here is a little help from yours truly:
Thanx to ToySoft for directing me to the necessary reboot of my PC, after the drivers did not install the first few times around, plus a bit of exercising of my little grey cells... After a bit of wrangling - I succeeded... This really does work, unlike the previous versions I tried long, long ago, when I was stuck in a similar fashion...
1) One must install the drivers first, then the flasher starts, and if it can't connect - restart your PC, unplug everything USB-wise, try again. It worked in my case.
2) The trick was to retry, if you fail the first time around: direct the re-installation of drivers by choosing the C partition, then it found the drivers and then it all worked!
3) Also, thanx to somebody saying to untick the "LAN/Network" box in the Flasher GUI, i.e. to have the cable plugged in (possibly to detect the box) but not to use the network to flash it, I suppose...
624a0cf.jpgThe flashing is done by a mini USB cable and it is slow - but it worked!!! BRAVO, whomever wrote that! I is 'un 'appy clappy chappy, having my special box back! :)
The only weak point of it is the lack of proper procedure included with the app... ;)
But that's why you have - me...:P:rasta2bigsmoke0gf1::thumbup:
I want to thank you, I needed this file to connect dreamUp to the box.:thumbup:
Thank you for your insistence on collaboration
-
I opened the control panel of windows 10 and noticed that in devices and printers, the dream500hd is installed with a yellow triangle (solve problems);
When clicking on this triangle, the information appears that the dream has no controller.
Is it because of this lack that dremUp or JapharFlasher does not work?
-
I use the browser Firefox
-
I followed the procedure carefully in mine... ;)