Just having a read up on wiki, am I right in saying that the emms are switched off at the moment to the card, ?
Does anyone know which ones of the above should be set to zero ? to allow the emms to be sent to the card ?
Thanks
Al
Posts by Big Al
-
-
Hi Jim/Bob
about 6 weeks now they expire on the 17/1/17, im getting a bit worried now.
Sorry Bob, where would I check the emms to the card, im brand new to oscam after using cccam for the last 10 years :dumb:Ive just found this in oscam.server
[reader]
label = SKYUK
protocol = internal
device = /dev/sci1
caid = 0960
boxid = **********
detect = cd
mhz = 450
cardmhz = 2700
group = 1
emmcache = 1,3,2,0
blockemm-unknown = 1
blockemm-g = 1
saveemm-u = 1
saveemm-s = 1 -
Hi Guyz
I wonder if anyone can advise, im using an oscam file posted by master g, all Sl* channels are clearing as they should, but my entitlements havent been updated since I started using oscam, dvapi, is set to on as standard in the files of master G, am i missing something or should the card get the entitlements itself
Al -
Hi Guyz
I wonder if anyone can advise, im using an oscam file posted by master g, all Sl* channels are clearing as they should, but my entitlements havent been updated since i started using oscam, dvapi, is set to on as standard in the files of master G, am i missing something or should the card get the entitlements itself
Al -
I did it in DCC mate, but later found that it hadnt uploaded it to oscam, i did some digging and managed to load it via oscam webinf, thanks for the reply mate.
Im now onto setting oscam to AU the card for me, its a steep learning curve, ive manged to convert my f lines into oscam and there working for my son and daughter , im getting there -
Guyz
I wonder if anyone can advise please, Im brand new to oscam from CCCam ,ive just installed the latest version of oscam as posted by Master G in the last few days here :
http://linuxsat-support.com/sh….php/119264-cccam-v-oscamIt says in that thread just insert your reader, Ive done a search and ive copied this in from one of his previous posts
####oscam.server####
[reader]
label = SKYUK
protocol = internal
device = /dev/sci0
caid = 0960
boxid =
cardmhz = 2700
mhz = 450
detect = cd
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-g = 1
saveemm-u = 1
saveemm-s = 1Oscam is running, it sees the card ive inserted the box Id but the sports and movies are not clearing, i know ive done something wrong but cant see what, any one see anything please
Thanks
Al -
Master g,
I have a mate of mine over the pond, in his house he has a main box, and 5 older boxes, all with cards in, is it likely the old boxes would have paired the cards to them ? or is it a new it only the newer boxes
Al -
Hi G,
thanks so much for your help on this,
Ive just followed your last bit of advice, the reason why cccam did not work earlier when I added the box key in, was i didnt change the frequency to what you posted,
should read better, ( its my old eyes mate honest )SMARTCARD CLOCK FREQUENCY: /dev/sci0 3750000
cccam working well, I will continue to experiment with oscam, as many say its the way forward,
thanks again
Al -
Hi G,
thanks so much for your help mate,
ive added my boxkey into oscam all channels now clearing ( An old dog can learn new tricks LOL )
Now next step is adding my f lines in, i share with my two kids,Ive found the cccam to oscam converter you posted mate, ive converted the filnes, but when i go to log into the web interface for your oscam its asking for username and password, so i cant get in.
I was going to add them via DCC into oscam user, but there is a config file in there, so didnt look like the right place to add them so i lost my nerve.Have i followed the advice, correctly so far mate, convert the F lines into oscam format with your converter, then copy and paste them into oscam user somehow ?
Thanks
AlAl
Al -
Hi G,
Thanks for the reply, Ive loaded it into cccam 2.30, on my vusolo 2, ive loaded your oscam config from page 1, and activated that oscam file on my vu, it clears non premium, channels fine, but wont clear, movies sport etc, so im not sure how, i load the box key into your oscam file, i downloaded your ipk for the blackhole image,
i never changed over to oscam as i found it a little confusing, so sorry for the dumb questions mate, allso, will your config use the cccamcfg on my box, as i share with my kids, or do i have to laod the clines into oscam- - - Updated - - -
Hi Guyz
Ive found a thread on here,
http://linuxsat-support.com/sh…php/110193-CCCAm-to-OSCAM
which explains a lot,
thanks
Al -
guyz
ive been using cccam for years, but sl* changed my old sd box over today as it has blown up, ive now got a red card, ive uploaded the oscam files form post one on my vu solo 2, the oscam file is running and will clear sl*1 etc, but no movies or sport, ive got my boxkey i think i have to get it into oscam somehow, BUt ive no idea hoe to load it into oscam, i know how to do it in ccam but its different i take it
al -
Ill take a look at those thanks very much G
Al -
I did G, ive fully rebooted a couple of times, but hes still popping up on cccam info with NOK next to his name now and again,
-
i know mate, but it took me 7 years to learn ccccam :06:, I think oscam is beyond my old years mate
-
Guyz
Im running a blackhole image on my Vu solo 2, The cfg file is an old one that i add in to my cccam file as its setup, BUT Im looking to add in a list into the Sid assign (reject requests) but with the cfg file being from 2.12, the section isnt in the file does anyone have a Blank 2.30 cfg file pleaseThanks
Al- - - Updated - - -
found it on the site Guyz,
thanks
Al- - - Updated - - -
Guyz
Im hitting a brick wall, Ive been given a list of Sids to reject, see belowSMARTCARD SID REJECT: /dev/sci0 { 0f45,0f41,0f1f,0f69,0f30,0f10,0f3e,0f4c,0f23,0f21, 0f1e,0f44,0f24,0f1c,0f4e,0edc,0f04,0eef,0f1b,0f2e, 2710,0f50,0f68,0f40,0ede,0ef8,0f2d,0f1d,0f0e,0516, 0ee6,0f17,0f4a,0f0d,0eeb,0f3c,0ee8,0eea,0ee7,0c1d, 0f1a,0f0a,0ee9,0f3d,0f47,0f3c,0fc4,0f4d,0f25,0fa3, 0eda,0edf,0f26,0f46,0f49,0fa1,0eee,0ef0,0fa4,0ef2, 0ef3,0faa,0efb,0efc,0f16,0f15,0f19,0eed,0fc9,0f2c, 0f42,0f43,0f28,0f3f,0f5c,0f5d,0f5e }
As when I have a client who is trying the HD channels on S*y uk, and its getting NOK in the cccam info page, apparently this can cause major glitching to occur, ive put the Sids in to be rejected, but hes still showing as 0963:000000:d3c9 (nok)| 0.067s , should they be able to connect or should cccam block them completey ?
or should it still show as NOK
many thanks Guyz
Al -
Hi Mate
Sorry to ask a newbie question ive just had a new solo 2 delivered, to install this as a fresh image, or do I restore the back up ?
al -
-
-
Hi Mate
Ill take this for asking, as long as we can sort out a way of payment and delivery, im very wary of sending £160 to anyone that I dont know, and im sure you dont want to send first without payment,
where are you based mate ?
are you on any other forums like Av forumsAfter looking closely at the picture mate, the receiver, seems to have some marks on it, just to confirm, you are selling the brand new Vu solo 2 you won on here ?
best regards
Al