Posts by ajerizteasi

I want to ask if it's possible to create a multiboot menu on my dreamone, not between 2 or more images, but between coreelec (on sd card) and an image flashed on the dreamone. Now before starting with this, I flashed the gemini factory image

Someone can help me with this matter?

Thanks in advance.

Moreover I've found this tutorial, but it doesn't specify if it's possible to switch from coreelec (flashed on sdcard) to any image ( flashed on dreamone). Must I follow the instructions of this guide or someone can help me better?

Alan Turing: Multiboot Dreambox OE2.6

Alan Turing es un plugin para imagenes Dreambox OE2.6, en este caso para modelos dreambox ONE o TWO, que nos permite tener varias imagenes diferentes en…

jungle-team.com

Thanks in advance.

Hi,

I've found what I need here

Opendreambox 2.6 – AIO: Nuevas imagenes Dreambox Amlogic

Opendreambox 2.6 – AIO son las nuevas imagenes para receptores Dreambox con cpu amlogic, en la actualidad Dreambox one y Dreambox Two. Se denominan…

jungle-team.com

Firstly I've installed the image and secondly I've followed this tutorial to install Kodi:

Instalar kodi 19 en Dreambox one ultraHD

En receptor Dreambox one ultraHD es posible la instalacion de kodi 19 gracias a emanuel del team dreambox, en este articulo vamos a desarrollar su instalacion.…

jungle-team.com

Thanks a lot.

Hi, it's possible to install Kodi on my Dreambox One Ultra HD, my linux receiver?

If yes, what image must I install firstly on the receiver?

Is there any tutorial or instructions to proceed once the image is installed?

Currently I'm running newnigma 2 and my problem is that when I try to connect with it using putty, putty returns me "acces denied" .

Thanks in advance

Where can I find this plugin for the Android receiver Amiko A6 combo 4k? If it isn't available, is there any alternative to this plugin?

Thanks in advance

Hi,

I've installed this image on my dreambox one. But how can I install pluto tv on this image?

Previously I've installed this extension on images PeterPan and Merlin and it is working properly. But when I try to install a downloaded pluto tv .ipk via FTP (/tmp folder) on this openbh image and restart the dreambox one, Pluto TV is missing.

In addition, I installed plutotv on open atv image, but it doesn't work properly.

Thanks in advance.

I've flashed to my dreambox one the image Dreamelite 7.1 with Oscam 11682. Now I'm interested in watching the Abertis channels (Hispasat 30W). Is there any tutorial with the detailed explanations to decrypt these channels?

Thanks in advance.

File does not exist. Can you reupload it, plz?

Thanks in advance.

auto-reply : problem solved

After changing batteries , I press the button "MODE" and suddenly the button changes its light from green into blue. Then I can handle the receiver with the remote.

Thanks.

Hi,

The remote control of my Dreambox One Combo doesn't respond when I press the buttons. I've tried reinstalling OpenPli 8.0 image, but I can not finish the new configuration because the problem with the remote is still persisting. And when I press some buttons, then the circular button "MODE" at the top center appears lighted in green. What can I do for now?

Thanks in advance

Emo,

Could you give me a repository of images for the Dreambox One Combo UHD?

Is there any link/web with alot of flashable images for this model?

P.S In order to avoid any errors in the near future

Thank you all

Thanks alot. I've returned the dreambox to Amazon, then Amazon will refund me the money and I rebuy the same product. Anyway I 'll save these new instructions in case needed.

Yes, thank you. But when I type the ip address of the box I can only acceed to it via Openwebif, not to recovery console.

Are there another different steps/instructions in order to do this flash online recovery?

Thanks in advance.

I can acceed via Openwebif to the dream, so I know its IP address. I've configured OpenVision with my mobile device and now I need help about flashing a new OpenPli or Openatv image.

Thanks in advance.

By the way I've connected the dream to my PC with Lan cable and then try to hold on the button searching for the rescue mode, but the lights sequence when switch on and off and hold on the button is as follows:

1.- blue

2.- green

3.- red (after several minutes)

And also of this my tv is not supported by 4k but I can say that when I flashed the openpli 8.0 , it was able to show on screen the ip address of the dreambox, and in the previous moment of the unfortunate flash to openvision the tv screen showed the ip address. So because of this, I think that the problem is not on tv...

It''s possible to flash image using a pendrive or usb?

Thanks for help

I only have a tv which is not 4k, sorry. But the real problem at the moment is that I can't see the ip address of the dream, so it's impossible to enter via ftp, putty and so...

Must I buy another Dreambox One Ultra HD?

Thanks for the advice one more time.

I followed the steps 1 to 4 and the dreambox showed green light, not red light. I can't connect with putty. But after a few, red light has appeared. I still can't acceed to the rescue mode. Maybe this tutorial won't be the solution.

Quote from emosim

Quote from ajerizteasi

Hi,

I'm trying to flash an openvision e2 image (maybe wrong image?) for my new dreambox one ultra hd combo. It seems that I failed, because at this time the box doesn't show any picture on tv screen and then I can't acceed to the rescue mode. When I switch on/off from the rear of the box, the receiver shows its current lights (blue, white, green, red and so...) but I don't know what to do.

Any help please? Is there a chance to recover my dreambox one ultra hd?

The image that I've tried to flash is the first of this list

https://www.enigma2.net/catego…/dreambox/dreamox-one-4k/

Thanks in advance.

Display More

openvision is trash for DreamOne/Two/Seven, use instead OpenPli, OpenATV, OpenBH or PurE2.

Emo

Display More

Thanks for the advice, Emo , but at this moment I need any solution for my problem. Previously I had OpenPli 8.0, but I wanted to try another new image and because of this, I'm now wxperiencing this problem with my Dream One Ultra HD. By the way, I find these steps on the forum:

Step 1: Get a SD-Memorycard and put into your computer.

Step2: When asked by Windows choose format, and choose format "Fat" not Fat32!!!

Step3: After format is finnished right click with your mouse on the SD Card device icon and cange label of the SD Card to DREAMBOOT

Step4: Now put the card in to the SD Card slot of your DM One UHD and power up.

Step5: Sometimes you get just a black screen and sometimes you get an option menu on your TV Screen.

Step6: Now connect with Putty choose Serial connection to your DM One UHD and if asked login with root then type without the run recovery_from_flash

This should clear your fault flash and put the DM One UHD into Recover Mode and you can flash new image from your Web Browser.

Are these instructions a solution to my problem?

By the way, where does the Dreambox One Ultra HD have the SD card slot specified on the Step 4?

Sorry, but quite a few hours ago, I was able to watch tv programs with my Dreambox One Ultra HD connected to my Sony Bravia . The problem is not on the TV, I think. Now the Dreambox One shows red light...

Hi,

I'm trying to flash an openvision e2 image (maybe wrong image?) for my new dreambox one ultra hd combo. It seems that I failed, because at this time the box doesn't show any picture on tv screen and then I can't acceed to the rescue mode. When I switch on/off from the rear of the box, the receiver shows its current lights (blue, white, green, red and so...) but I don't know what to do.

Any help please? Is there a chance to recover my dreambox one ultra hd?

The image that I've tried to flash is the first of this list

https://www.enigma2.net/catego…/dreambox/dreamox-one-4k/

Thanks in advance.

Autoreply: I've connected the receiver to the Ethernet instead of the Wi-FI and TV shows the IP address.