Code:
v.1.0.3c
- fix oscam-config.h -> config.h
- prepare startup cortexA8/A9 ARM build
v.1.0.3d
- fix oscam-ecm+emm.c
please del/Patches/*
Code:
v.1.0.3c
- fix oscam-config.h -> config.h
- prepare startup cortexA8/A9 ARM build
v.1.0.3d
- fix oscam-ecm+emm.c
please del/Patches/*
here you go
try the latest HDMU e2 image for the alien2 and see how it worked out.
you are right 8820 is a non Linux box.
and you have tryed sparkeditor.
use dreamboxedit
works great on my alien2 and vu+solo2
here you go
HDMUSkin zu finden unter /usr/local/share/enigma2
HDMUCenter zu finden unter /usr/lib/enigma2/python/Plugins/Extensions
no this will not work on the solo2.
use only images for the solo2 and make then a backup.
and introduce yourself here : Forum Gateway - Powered by DnP Firewall
Try another image for the vu+solo2 like vti or openvix or openaaf.
look here and try : http://linuxsat-support.com/am…-new-flashing-alien1.html
Instructions for the emergency: uboot new flashing
There are increasing reports of users that shooting up the boot loader or corrupt, although this should be impossible due to read-only ;)
The box gets stuck in the episode at boot time (display: boot) no longer boots up, no matter if spark or Enigma.
Normally, this is a case of warranty.
You can save postage and time but by you yourself new overrides in case of emergency the submarine.
Attention: only for users with some clue in matter > everyone else please the box send to repair!
Instructions:
What is needed?
Null modem cable
Hyper terminal program (Windows XP: start > Accessories > communications > HyperTerminal)
Note: starting with Windows Vista, HT is no longer part of Windows, but there are freeware.
Emergency-HowTo: override bootloader
==================================
Use only in case of an emergency!
-Switch off box, then connect to PC/laptop via null-modem cable (RS232)
-Start HyperTerminal and create new connection
-> select correct COM interface
-> Bits per second: 115-200
-> Flow control: no
-Then transfer > Send file
-Select correct uboot-xxx.bin
-Log: Ymodem
-Click send!
> now before turning on the box!
-When you turn hold button [OK] to [FORC] appears
-then left arrow [<] press
-RS232 appears on the display
Now is the transmission, which should take about 2 minutes.
Turn off not prematurely or other maneuvers at this stage!
Flash at your own risk!
Thx to the RSP team for the uboot-alien
yes it is working with the alien2
fine you sorted it out
don`t forget to update to 1.2.51 e2 boot upgrade.
switch the box off and hold the ok button pressed
when you see forc than press the upper button,you will see spar(k) and press ok.
then the box will boot in spark.
boot into spark
i think you must try the 1.2.51 e2 boot upgrade.
and then try to flash e2 again.
can you boot into spark.
have you try another image like HDMU or pkteam
Wich e2 image are you trying to flash.
first post
introduce yourself here : Forum Gateway - Powered by DnP Firewall
read this is helpfull
http://linuxsat-support.com/am…ading-spark-firmware.html