hi.
a gold card wont open these 4k channels, you need a rainbow silver card, these are not that common.
Posts by Clive01
-
-
hi all
I spent most of my day yesterday looking at this, i took the v box outside near the dish, put one cable into the stb and watched dubai racing, no problem, i then added the v box and bang.
Im now 99% certian, its the fault the v box is spilting the signal all be it very slightly, that is causing this.
I wanted to make sure it wasnt anything in the house causing the issue, things like sound bars, phones etc etc.
Im only getting 48% quailty with a little ber with no v box connected, the signal stays around the sam, but the ber goes up quite a bit.
I guess if i want to watch 7 west, ill just have to remove the v box.
I did try not even plugging the v box into the mains socket, but have the dish feed going into it, and the problem was still there. -
i wonder which picture is with the v box connected, and which one there was no v box connected
-
hi, im using a
TWIN INVERTO BLACK ULTRA LNB LMB DUAL DOUBLE SATELLITE LOW NOISE HIGH GAIN 2 WAY.
I know a dect phone can give issues, i did try unplugging that, made no difference, i do have the v box, next to some other electicial stuff, like tv satellite stbs, dab radion, dvd recorder sound bar, so maybe that is worth a try to unplug them.
i might even try a different lnb maybe the same as you use, or are we using the same one, i dont recall ever seeing anything about 4 or 5 g being blocked on my lnb box, that it came in
thanks for your replies, gives me a few things to try.
i have tried a different v box, as i have another one here, but that also caused the same issues
-
Display More
Okay just done blind scan of 7 west - 1.2 CM in the Essex area, using VU ultimo 4k with AVL 6222 tuner and Primesat Vbox connected
Dubai Racing 1 HD - SNR - 9.5 DB
Dunai Sports 2 HD - SNR - 9.6 DB
Dubai Sports 1 HD - SNR - 9.6 DB
Dubai One HD - SNR - 9.7 DB
Not any break up with those channels.
But.....
Kurdsat HD - 11449 H 27500 5/6, this has a lot of breakup despite a SNR of 9.2 DB, tomorrow will try without the Vbox connected to here to see if it is any better ?
On most sats 9.2 DB would not be an issue for me.
As you say the Vbox should not really be affecting things, but is dose slightly reduce signal, perhaps that is enough if your marginal on signal anyways......
thanks, sounds like the same thing, i have some channels with 50% quality but freezing, yes on other satellites i have 44% quality with no freezing.
I do get some same numbers of ber on 7 west, not all channels but some.
Dubai Racing 1 HD - SNR - 8.5 DB to 9.0 DB here 50% quality but some freezing, not lots but some ber going from 0 to 66 with v box installed
-
hi thanks
its the dubai racing channel hd all channels on freg 12418 h 3/4, dubai one hd is also effected
There are no breaks in the cable, they go into the v box directly, the only reason i joined the cable is its easier for me to use a joiner to take away the v box from the satellite circuit for testing.
I cant understand why they dont freeze, with no v box in circuit add it, then i get freezing.
-
Hi, i have a strange issue, wondered if anyone has any ideas.
I have a channel master 1.2 metre dish, all satellites are fine, from 53 east to 30 west, but for some reason 7 west is given me problems.
If i to to 7 west, i get a picture some fregs are ok others have freezing and high ber.
If i take out the v box and join the 2 cables from the LNB the picture is fine, no problems at all.
Put the cables back into the v box, and i get bad freezing again, and also high ber.
Ive tried a new LNB different v box, replaced the cable no luck, i dont know if it is becasue when the cables go into the v box, like almost like the signal is being spilt.
Anyone got any ideas, its really bugging me. i know 7 west is weak in the uk, but why is the picture fine with no v box connected.
-
whath, happen with tcm movies on astra 28 east , ecm i have but black screen ....
tcm stopped broadcasting, channel has creased transmissions
-
Hi, does anyone know for certain, if digialb uses Lpk as well as cwpk in there conax encryption??
Thanks -
hi, i have 2 alsat gbox positioners, both are working fine, but both have the same problem, the display on the front, is missing parts of the digits that show the position in the window, like p10 see attached,
Anyone know what is likely to be the problem, you cant buy these now, and the modern versions are not very good, i would like to get these repaired, if it is worth it.
My guess is its not the display itself, but might be wrong.
anyone any ideas?
thanks
-
are these news channels in full hd or just sd, i have scanned 5 east,and confirm they are broadcasting on that satellite now, its a very strong signal in the uk
-
On 15ºW, keys 00 & 01 are updated with EMM, and create cw0 and cw1 every few seconds, but black screen.
It's a config problem?
no, oscam-emu not support ECM mode for 15W
ok thanks, maybe someone can fix, so it does work.
-
On 15ºW, keys 00 & 01 are updated with EMM, and create cw0 and cw1 every few seconds, but black screen.
It's a config problem?
hi, can you post the whole keys for this package, is there any keys needed as well as the auto update key?
As im not getting no keys landing here
thanks
-
2023/04/07 20:13:37 2BE31EB9 r (emu) Key not found or invalid: P ****0067 00
2023/04/07 20:13:37 2BE31EB9 r (emu) ECM failed: Key not found
2023/04/07 20:13:37 42972369 c (ecm) dvbapi (0E00@000000/0000/0067/48:9143383B6DC1B77B7FE42B2213292847): not found (1 ms) by emulator
2023/04/07 20:13:37 42972369 c (dvbapi) Demuxer 0 restarting decoding requests after 2 ms with 1 enabled and 0 disabled ecmpids!
2023/04/07 20:13:37 42972369 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1771 ANY CHID PMTPID 1120 VPID 1121
2023/04/07 20:13:38 2BE31EB9 r (emu) Key not found or invalid: P ****0067 00
2023/04/07 20:13:38 2BE31EB9 r (emu) ECM failed: Key not found
2023/04/07 20:13:38 42972369 c (ecm) dvbapi (0E00@000000/0000/0067/48:4066F7528B253AB7985B6D5F3461FCEE): not found (1 ms) by emulator
2023/04/07 20:13:38 42972369 c (dvbapi) Demuxer 0 restarting decoding requests after 2 ms with 1 enabled and 0 disabled ecmpids!
2023/04/07 20:13:38 42972369 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1771 ANY CHID PMTPID 1120 VPID 1121
2023/04/07 20:13:39 2BE31EB9 r (emu) Key not found or invalid: P ****0067 00
2023/04/07 20:13:39 2BE31EB9 r (emu) ECM failed: Key not found
2023/04/07 20:13:39 2BE31EB9 r (emu) Key not found or invalid: P ****0067 00
2023/04/07 20:13:39 2BE31EB9 r (emu) ECM failed: Key not found
2023/04/07 20:13:39 42972369 c (ecm) dvbapi (0E00@000000/0000/0067/48:889B630942C951DCB108DF0976B9233E): not found (1 ms) by emulator
2023/04/07 20:13:39 42972369 c (ecm) dvbapi (0E00@000000/0000/0067/48:017E19769D11D1D5A71B15A067F163B1): not found (3 ms) by emulator
2023/04/07 20:13:39 42972369 c (dvbapi) Demuxer 0 restarting decoding requests after 2 ms with 1 enabled and 0 disabled ecmpids!
2023/04/07 20:13:39 42972369 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1771 ANY CHID PMTPID 1120 VPID 1121
2023/04/07 20:13:40 2BE31EB9 r (emu) Key not found or invalid: P ****0067 00
2023/04/07 20:13:40 2BE31EB9 r (emu) ECM failed: Key not found
2023/04/07 20:13:40 42972369 c (ecm) dvbapi (0E00@000000/0000/0067/48:C5A68F7ABB270D8B01F39F60D57E0878): not found (1 ms) by emulator
2023/04/07 20:13:41 42972369 c (dvbapi) Demuxer 0 restarting decoding requests after 2 ms with 1 enabled and 0 disabled ecmpids!
2023/04/07 20:13:41 42972369 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1771 ANY CHID PMTPID 1120 VPID 1121
2023/04/07 20:13:41 2BE31EB9 r (emu) Key not found or invalid: P ****0067 00
2023/04/07 20:13:41 2BE31EB9 r (emu) ECM failed: Key not found
2023/04/07 20:13:41 42972369 c (ecm) dvbapi (0E00@000000/0000/0067/48:199D9BAD7941653E87446EF05A6D9117): not found (1 ms) by emulator
2023/04/07 20:13:42 42972369 c (dvbapi) Demuxer 0 restarting decoding requests after 2 ms with 1 enabled and 0 disabled ecmpids!
2023/04/07 20:13:42 42972369 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1771 ANY CHID PMTPID 1120 VPID 1121
2023/04/07 20:13:42 2BE31EB9 r (emu) Key not found or invalid: P ****0067 00
2023/04/07 20:13:42 2BE31EB9 r (emu) ECM failed: Key not found
2023/04/07 20:13:42 42972369 c (ecm) dvbapi (0E00@000000/0000/0067/48:611E668CAAE86EE222751975C305B592): not found (1 ms) by emulator
2023/04/07 20:13:43 42972369 c (dvbapi) Demuxer 0 restarting decoding requests after 2 ms with 1 enabled and 0 disabled ecmpids!
2023/04/07 20:13:43 42972369 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1771 ANY CHID PMTPID 1120 VPID 1121
2023/04/07 20:13:43 2BE31EB9 r (emu) Key not found or invalid: P ****0067 00
2023/04/07 20:13:43 2BE31EB9 r (emu) ECM failed: Key not found
2023/04/07 20:13:43 42972369 c (ecm) dvbapi (0E00@000000/0000/0067/48:F7752405B729896E00D55B3DE8D5C5F8): not found (1 ms) by emulator
2023/04/07 20:13:44 42972369 c (dvbapi) Demuxer 0 restarting decoding requests after 2 ms with 1 enabled and 0 disabled ecmpids!
2023/04/07 20:13:44 42972369 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1771 ANY CHID PMTPID 1120 VPID 1121
2023/04/07 20:13:44 2BE31EB9 r (emu) Key not found or invalid: P ****0067 00
2023/04/07 20:13:44 2BE31EB9 r (emu) ECM failed: Key not found
2023/04/07 20:13:44 42972369 c (ecm) dvbapi (0E00@000000/0000/0067/48:000DBFA726008BD058B3F6129D43E191): not found (1 ms) by emulator
2023/04/07 20:13:45 42972369 c (dvbapi) Demuxer 0 restarting decoding requests after 2 ms with 1 enabled and 0 disabled ecmpids!
2023/04/07 20:13:45 42972369 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1771 ANY CHID PMTPID 1120 VPID 1121
2023/04/07 20:13:45 2BE31EB9 r (emu) Key not found or invalid: P ****0067 00
2023/04/07 20:13:45 2BE31EB9 r (emu) ECM failed: Key not found
2023/04/07 20:13:45 42972369 c (ecm) dvbapi (0E00@000000/0000/0067/48:E7D18FDC5AF22B4540D5C7F1BC41D7CF): not found (1 ms) by emulator
-
hi is there anything else i need to add to the softcam key, the local host dont seem to even try to take the powervu on these news channels on 15 west, yet 9 east powervu works fine
thanks
-
Hi, just wondered if anything has changed on this package now, i did a scan on 15 west last night, and saw these news channels, i wondered if these work on the powervu emu or not.
thanks
-
Display More
Hi all, thanks for the replies, so from the above on a 1.2 metre dish, not much point in changing it.
I get 7 west, most channels are ok, but some i dont get until the night time, i wondered if this new LNB would help, i cant go any bigger than a 1.2 metre dish, so alwats hoping a new LNB would give me a little more signal.
Thanks,
A LNB is worth a try, it is a cheap test if you cant go bigger, i wish i could go bigger (think i would get divorced if i did) and i have the same issue on 7west....
I found with this invertor lnb it worked best for me when closer to the dish, IE push it in the LNB holder closer to the dish face than you would normally.
TBH i too have heard good things about this https://www.tvcorner.com/en/an…sal/golden-media-204p.php As suggested by jojoz
Would be interested in your results if you do try that one.
hi, i brought one of them about 6 months ago. lasted 10 minites on my dish, very satellite has a lower quailty reading with that LNB, changed back and readings back to what i normally get.
-
Hi all, thanks for the replies, so from the above on a 1.2 metre dish, not much point in changing it.
I get 7 west, most channels are ok, but some i dont get until the night time, i wondered if this new LNB would help, i cant go any bigger than a 1.2 metre dish, so alwats hoping a new LNB would give me a little more signal.
Thanks,
-
Hi, which LNB is better, for a low signal,using a channel master 1.2 metre dish
i have the black ultra 40mm lnb, at the moment:
but wondered if i would gain anything from getting this newer version which is the inverto pll 40mm lnb
Both lnbs are the twin version
thanks
-
Hi, not sure why, but i did a reboot of the hard drive and stb and now all working with the logs etc, all working.
thanks for the replies anyone gave me
