The Hisilicon Hi3798MV200 Huawei Quad Core 64 bit ARM chip is the same one that mounts zgemma H series, hitube, octagon etc. etc. he is the problem
Posts by zorro71
-
-
I don't care about the gold, red, white color, I would like them to correct the bug when changing the channel (slow motion effect) of the Hisilicon chip ... before putting other products on the market .. right?
-
I would have preferred an upgrade of the Hisilicon chip .. the slow motion RALLENTY when changing channels is aannoying..
-
9.0.4 is available only donor
-
-
hello of course it works flash and test
:hello
-
-
flash procedures have changed
-
I think there is no support for spark...
I'm sorry
-
ho il dubbio che sia brikkato allora .. cerca su san google forse esiste una procedura particolare che non so'. buona fortuna
-
sicuro che la usb e' compatibile??
-
that I know recovery is not there....
there is a guide for flash
here she is
flash procedure x H9.2H
- Use the FAT32 formatted USB stick - Send the h9 folder and the 2 files (bootargs. Bin and fastboot. Bin) to the already formatted USB stick and then remove it from the PC correctly ...
- turn off Zgemma h9.2h on the back, using the white power button
- push the USB stick into the rear USB port of the h9.2h
-Press and hold the small black RESET button on the back, then
-Press the white POWER button, holding down the RESET button
- let go of the RESET button once you see the flashing LED (changing color between white and red)
-Wait a little'...
WAIT FOR THE LOADING UNTIL THE USB PEN NO LONGER FLASHES AND THE FLASHING OPERATION IS COMPLETED
TURN THE DECODER OFF, REMOVE THE USB AND TURN THE DEVICE ON AGAIN, THE BOOT WILL BE CARRIED OUT WITH YOUR NEW IMAGE LOADED !!
procedura flash x H9.2H
-Usa la chiavetta USB formattata FAT32-Invia la cartella h9 ed i 2 file (bootargs. bin e fastboot. bin) alla chiavetta USB gia' formattata e poi toglierlo dal PC correttamente...
-spegnere Zgemma h9.2h sul retro, utilizzando il pulsante di alimentazione bianco
-spingere la chiavetta USB nella porta USB posteriore del h9.2h
-Premere e tenere premuto il piccolo pulsante di RESET nero sul retro, quindi
-Premere il pulsante bianco POWER, tenendo premuto il pulsante RESET
-lasciar andare il pulsante RESET una volta che si vede il LED lampeggiante (cambiando colore tra bianco e rosso)
-Aspetta un po'...
ATTENDENDETE IL CARICAMENTO FINO A CHE LA PENNA USB NON LAMPEGGERA' PIU' E NON SARA' COMPLETATA L'OPERAZIONE DI FLASHING
SPEGNETE IL DECODER , RIMUOVETE LA USB E RIACCENDETE IL DISPOSITIVO ESEGUIRA' AUTONOMAMENTE IL BOOT CON LA VOSTRA NUOVA IMMAGINE CARICATA!!
ciao :hello
-
hello taha90 this backup is for multiboot?
-
-
thanks is it an multiboot image?
-
-
filomena99 I also use ATV 6.3 but in the multiboot I wanted to put other images .. also opendroid and 'very beautiful .. greetings
-
Hello I mean that for the EU and Quad models the PLI image is available ... while for the TRIO model it is not available.
-
I wanted to know why the Openpli team does not support this receiver model, while the image is available for x Giga UE 4K and Giga Quad 4K model.
-
gorski Yes just for pure2 image the procedure is the same, thank you friend soon :hello