Posts by lioxir

  • How let the dm 900 in off status?

    Hi all,


    Possible let the dm 900 in off status, turning on the rear panel power button?

    I have tried but the dm 900 start ONLY in standby mode or full operating not possible let the dm 900' in off status.

    This off status is ok for me because my remote control start both tv and decoder with 2 ir signals, so if the tv is turned on now the dm 900 is turned off because is on.:angry1:

    I normally turn off the power, i never let tv, decoder and also others electronics devices in stand by when i'm not at home.


    thanks

  • Plugin for changing encryption on smart card reader

    Quote from master G

    You can`t change the default encryption of the hardware/smart card reader.

    Thats what softcams like oscam are for. A software version of conditional access modules (CAMS), that works on different encryptions.

    Ok, but for example if i want use a gbox softcam that decrypt irdeto,seca, nagra, via, biss, pvu and that gbox cam is included in the newnigma 2.5 firmware, its necessary connect in the USB port a smargo usb card reader with or without smart card inside? In this way i can obtain a multicam for these decryption systems?

  • How install Binaries file

    The file libusb-1.0.0 is inside that directory lib.

    This is an update the attachment?

    The file oscam svn10505 .....dvbapi libusb.... emu.upx is the binary file for dm 900?

    Another file oscam svn 10505 dm900 solo4k..... patched where is to be copied that file is an update for oscam emu?

  • How install Binaries file

    Yes, i have an oscam file in usr/bin directory.

    So i delete this file then i rename the..... emu.upx file as oscam name file and attribute 755 then copy it in usr/bin?

    But the other file named svn10505..... patched is also a binary file or emu update? where is copied this file?

    What is that command telnet opkg install libusb 1.0.0? is near the link to download the binary file.

  • How install Binaries file

    Please explain how install the arm Binary file for dm 900 and dm 920 dreambox.

    The opkg install libusb 1.0.0. is a command via telnet, but the downloaded binary arm file upx is to be copied in usr/bin directory?


    Thank You

  • Openatv don't open fta channels

    Dreambox DM 900 UHD 4K NEW MODEL 2019


    When i start the dm 900 the open atv logo appear also on the left appear the parabolic dish image flashing

    continuously and show under that move from 13 E to 13E same satellite hot bird position..... I don't know why this! I have a parabolic dish mounted on stab rotor. This blocke screen with open atv logo is about 2 or 3 minutes then suddenly unblock and the channel is visible again.

    The satellite signal is strong i can view the bar of this signal on the lcd display.

    This trouble is not every time i start dm 900 sometimes this block don't appear and the channel is visible soon. Thank you

  • Openatv don't open fta channels

    I have installed version 24/2 but sometimes the fta channel don't open, the open atv logo don't disappear to let view the channel selected.

    Possible downgrade to an older version?

    With older version no problem.


    Thank You

  • info about oscam files

    i see 2 files


    oscam-svn11504-arm_dm900-solo4k-webif-oscam-emu-patched


    oscam-svn11503-arm_dream-webif-dvbapi-ssl-libusb--emu-upx


    are same binary files used for different dreamboxes?


    i see in usr/bin directory a file name oscam what is this file?

    installed is 11503 789


    my db is dm 900 4k uhd


    thanks

  • Fta channel don't open

    I have installed last version of open atv 6.3 date 22/02.

    Happen this.... when i start dm 900 the last channel FTA i have viewed dont open i can see the open atv logo so go to select another fta channel start this channel so i can open again to view. Also the parabolic dish icon flashing is not visible when i change satellite.


    How resolve?


    Thank You

  • Info bar for openatv 6.3

    I have found a beautiful info bar plugin named 'golden blue' its ok it contains all information about a channel very large with big letters and numbers containing in the lower also all the encryption systems used by sat providers.

    Many thanks elton 74 but the skin golden blue for me is very good. I appreciate your suggestion.

    Im looking for now for a plugin that show me the list of all satellites in the polar arch 36E to 36W.

    Selecting using the arrows of remote control a satellite and pressing ok the rotor move to that satellite easily. When i am example on hispasat 30w i can do a search fo new channels.

  • Info bar for openatv 6.3

    I have found a beautiful info bar plugin named 'golden blue' its ok it contains all information about a channel very large with big letters and numbers containing in the lower also all the encryption systems used by sat providers.

  • Info bar for openatv 6.3

    I have downloaded a info bar named dream multimedia for openatv 6.3.

    When i press the ok button appear and let me know all about that channel but i can't see on which satellite i am no satellite icon with name visible. I see many info bar to download do you know one that have this info on it?

    I like also a plugin so for example i press a button and show the list of all satellites available from 36E to 36W and my motor can move directly on that satellite i choosed without using the vhannibal list of channels or others

  • Info bar for openatv 6.3

    I want to know if available to download which name is...... that show exactly on the bar on which satellite i am. Is available a plugin that allows pressing a button on the remote control to show a satellite list and go directly to a satellite? I have a motorized dish.


    Thank You