Posts by tebaa

just seen first page disregard last comments

sounds like one of the tuners is say on 19.2 where as your looking for it to be on 28 not sure how to get to tuner configuration in bh but in vix its
menu-setup-service searching-tuner configuration and you can see both tuners and which one is not on right sat

i think its radio 1 for requests

hi all when i input this. svn co h##p://streamboard.de.vu/svn/oscam/trunk oscam-svn (change ** to tt) i get command not found

can anybody point me in the right direction to solve this cheers tebaa

had changed them for tt

hi all when i input this. svn co h**p://streamboard.de.vu/svn/oscam/trunk oscam-svn (change ** to tt) i get command not found

debian server 64 bit
think it was one of your auto installs i used if i remember ten
i took the oscam from the latest oscam at top of main page this one here
oscam-svn8349-x86_64-pc-linux-webif-libusb-ssl-Distribution.tar

cheers tebaa

hi all tried again to update my oscam by following this .....

download new oscam
stop oscam on your server
ftp to server and rename current oscam to oscam-old for example, just so you will have a copy of it if you need to revert back
ftp new oscam to server
chmod it 755
restart oscam

but it comes up no process when i try to restart it does anybody have any ideas as to where i am going wrong cheers tebaa

vlc does that to mine aswell but windows default player plays it no bother on my lappy .but on main computer its the other way about

just installed this plays all channels but havent any sound .any ideas
cheers tebaa

a wee update tried to update this and got this .oscam: /lib/libc.so.6: version 'glibc_2.14'not found
so just went back to the one above and think i will just stay on it lol

OSCAM 1.20-unstable_svn build #6012 this is what im running in my debian server
i have no issues or problems with it but was just wondering weather i should go to the latest version
or just leave it since its all good
cheers tebaa

dont think you get discount or free postage cos i didnt when i bought two vu duos

can you update it from the x3 lan tool?thats what i used .when it happend

my ***box used to do the same every now and then .used to just reboot it or reflash the firmware and it was all good

ten i am very greatfull for your offer of help and others aswell but timeing was all wrong and then didnt want to ask for help again as i had knocked yous back last time
and thought i would try all over again
cheers tebaa

so this is my full configs

oscam.server

[reader]
label = ***uk
protocol = pcsc
enable = 1
device = 0
#boxid = xxxxxxxx #( not needed as oscam can read *** uk boxid )
mhz = 600
cardmhz = 600
caid = 0963
ident = 0963:000000
group = 1
emmcache = 1,3,2
ecmcache = 1
blockemm-g = 1
blockemm-unknown = 1
blockemm-u = 0
blockemm-s = 0
lb_weight = 101
ecmwhitelist = 0963@000000:3E,4F,42,44,45,47,4E,53,54,56,61,67,62 ,68,69,6A,6B,6E,6D,6F,71,72,73,77,78,74,79,7A,7C,7 D,7E,80,8B,85

oscam.conf

[global]
logfile = /var/local/oscam.log
cachedelay = 120
nice = -1
maxlogsize = 0
saveinithistory = 1

[newcamd]
port = 15500@0963:000000
key = 0102030405060708091011121314
allowed = 127.0.0.1,192.168.0.0-192.168.255.255
keepalive = 1

[webif]
httpport = 15000
httpuser = user
httppwd = password
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255

oscam.user

[account]
user = user
pwd = password
uniq = 2
monlevel = 1
caid = 0963
ident = 0963:000000
group = 1
au = ***uk
blockemm-unknown = 1
blockemm-g = 1
blockemm-u = 0
blockemm-s = 0

............................................
SERVER LISTEN PORT : 52000
ALLOW TELNETINFO: yes
ALLOW WEBINFO: yes
WEBINFO USERNAME :root
WEBINFO PASSWORD :dreambox
TELNETINFO USERNAME :root
TELNETINFO PASSWORD :dreambox
TELNETINFO LISTEN PORT : 16000
WEBINFO LISTEN PORT : 16001
ZAP OSD TIME :0
OSD USERNAME :root
OSD PASSWORD :dreambox
OSD PORT :80
SHOW TIMING : yes
DEBUG : no
NEWCAMD CONF : no
#DISABLE EMM : yes
#EXTRA EMM LEVEL : yes
SHOW EXTENEDED CLIENT INFO : yes
MINI OSD : no
#MINIMUM DOWNHOPS: 1
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
PROVIDERINFO FILE : /var/etc/CCcam.providers
CAID PRIO FILE : /var/etc/CCcam.prio
LOG WARNINGS : /tmp/warnings.txt
SOFTKEY FILE : /var/keys/SoftCam.Key
AUTOROLL FILE : /var/keys/AutoRoll.Key
#STATIC CW FILE : /var/keys/constant.cw
#BOXKEY: /dev/sci0
#SMARTCARD CLOCK FREQUENCY: /dev/sci0 6800000

#N: 127.0.0.1 34001 linuxsat support 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

N: 127.0.0.1 15500 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
F: vu lounge

thats server

...................................................................
this is vu

SERVER LISTEN PORT : 52000
ALLOW TELNETINFO: yes
ALLOW WEBINFO: yes
WEBINFO USERNAME :root
WEBINFO PASSWORD :dreambox
TELNETINFO USERNAME :root
TELNETINFO PASSWORD :dreambox
TELNETINFO LISTEN PORT : 16000
WEBINFO LISTEN PORT : 16001
ZAP OSD TIME :0
OSD USERNAME :root
OSD PASSWORD :dreambox
OSD PORT :80
SHOW TIMING : yes
DEBUG : no
NEWCAMD CONF : no
#DISABLE EMM : yes
#EXTRA EMM LEVEL : yes
SHOW EXTENEDED CLIENT INFO : yes
MINI OSD : no
#MINIMUM DOWNHOPS: 1
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
PROVIDERINFO FILE : /var/etc/CCcam.providers
CAID PRIO FILE : /var/etc/CCcam.prio
LOG WARNINGS : /tmp/warnings.txt
SOFTKEY FILE : /var/keys/SoftCam.Key
AUTOROLL FILE : /var/keys/AutoRoll.Key
#STATIC CW FILE : /var/keys/constant.cw
#BOXKEY: /dev/sci0
#SMARTCARD CLOCK FREQUENCY: /dev/sci0 6800000

#N: 127.0.0.1 10000 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
C: 192.168.1.17 15500 vu lounge

cccam looks like its starting up but still cant connect so im really struggling now to work this out
just not got the faintest idea what to do next. if anybody can help me it would be much appreciated
cheers tebaa

changed configs all ok there but i dont think cccam is starting it was the debain 6 64 bit amd install that i did
could some one tell me how to upgrade or reinstall cccam please
cheers tebaa

hi all it was option 3 that i was going for . i was just trying to setup vu duo and a cpl of bedroom boxs to the debain server with omnikey.
just because i like to play about with the images on vu and the server way means wife and kids still got telly
but i just cant get it at all .i have printed off a rainforrest and read and reread tuts but just cant get it at all
cheers tebaa

right lads i have had a total fecking mind wreck with this gonna start over again .can anybody tell me what i need in my vu duo and then what goes into the debain server
cos right now i could launch the lot out the window. i think i have over complicated things by printing and reading everything that looked if it would help me and now
my pea sized brain is frazziled to pulp.
cheers tebaa