freddy88 added a new version:
Quotepython2
python3
python3.10
python3.8.5-openspa
freddy88 added a new version:
Quotepython2
python3
python3.10
python3.8.5-openspa
I never wrote that my version works anywhere.
I have open atv 6.4 and it works there.
Try again my version with telnet command and take this Exteplayer 3 file. It is from my version
with the exteplayer 3 is because it (i.e. in the case of Instalation) will be the right exteplayer 3 File from my File in Usr/bin hinkopiert. Aber because just the same Telnetbefehl
opkg install exteplayer3 then this File replaced by another by update from an incorrect File From Vti feed if the exteplayer 3 not more.lass also the Command opkg update away.
My exteplayerdatei is the latest version available (is the version exteplayer3 (67+gitr125+52666ca-r1)
I think it will be feed replaced with another version which is wrong
also
opkg update
opkg install exteplayer3
let go of times
copy this file TS-E2iplayer-2020.05.13.02.tar.gz into the tmp folder of your device with FileZilla Client and execute the following Telnet command with Putty.
(Info FilleZlla and Putty must remain open at the same time)
init 4
rm -rf /usr/lib/enigma2/python/Plugins/Extensions/IPTVPlayer
rm -rf /usr/lib/enigma2/python/Plugins/Extensions/settloader
rm -rf /usr/lib/python2.7/site-packages/pycurl.so
rm -rf /hdd/IPTVCache
rm -rf /media/hdd/IPTVCache
rm -rf /iptvplayer_rootfs
rm -rf /etc/enigma2/iptvplayerarabicgroup.json
rm -rf /etc/enigma2/iptvplayerfrenchgroup.json
rm -rf /etc/enigma2/iptvplayerhostsgroups.json
rm -rf /etc/enigma2/iptvplayerhostsorder
rm -rf /etc/tsiplayer_xtream.conf
rm -rf /etc/vk/0000040c.kle
rm -rf /usr/lib/gstreamer-1.0/libgstifdsrc.so
rm -rf /usr/bin/cmdwrap
rm -rf /usr/bin/duk
rm -rf /usr/bin/e2ibox
rm -rf /usr/bin/exteplayer3
rm -rf /usr/bin/f4mdump
rm -rf /usr/bin/fullwget
rm -rf /usr/bin/gstplayer
rm -rf /usr/bin/hlsdl
rm -rf /usr/bin/rtmpdump
rm -rf /usr/bin/uchardet
rm -rf usr/lib/enigma2/python/Plugins/Extensions/IPTVPlayer/bin/cmdwrap
rm -rf usr/lib/enigma2/python/Plugins/Extensions/IPTVPlayer/bin/duk
rm -rf usr/lib/enigma2/python/Plugins/Extensions/IPTVPlayer/bin/hlsdl
tar -zxvf /tmp/TS-E2iplayer-2020.05.13.02.tar.gz -C /
rm -rf /tmp/TS-E2iplayer-2020.05.13.02.tar.gz
sync
reboot
Please füre the Telnet Command as follows (with these he does not exteplayer 3 update from feed) but keeps mine.
It has to work, I also have open atv 6.4, and Exteplayer3 and everything else works fine for me.
the steps are
1.Removes the service app
2.Install my version
The exteplayer 3 problem is already solved if you simply uninstall the service app before using my version.
Removes the service app
Exteplayer 3 then works without problems
the steps are
1.Removes the service app
2.Install my version
just take my version that works wonderfully.
I have open atv 6.4
you service app worth changing to 50 is not feasible.
It is either by itself or not at all.
Uninstall the service app before you use my version.
The service app is just annoying
see link
yes you have to set the update server to maxbambi and set everything else as you want it
Yes, copy my file with the name TS-E2iplayer-2020.05.13.02.tar.gz into the tmp orner and execute the following Telnet command in the Putty. Confirm the command with the Enter key. The device then restarts and the player is installed and available for extensions
init 4
sed -i '/config.plugins.iptvplayer/d' /etc/enigma2/settings
rm -rf /usr/lib/enigma2/python/Plugins/Extensions/IPTVPlayer
rm -rf /usr/lib/enigma2/python/Plugins/Extensions/settloader
rm -rf /usr/lib/python2.7/site-packages/pycurl.so
rm -rf /hdd/IPTVCache
rm -rf /media/hdd/IPTVCache
rm -rf /iptvplayer_rootfs
rm -rf /etc/enigma2/iptvplayerarabicgroup.json
rm -rf /etc/enigma2/iptvplayerfrenchgroup.json
rm -rf /etc/enigma2/iptvplayerhostsgroups.json
rm -rf /etc/enigma2/iptvplayerhostsorder
rm -rf /etc/tsiplayer_xtream.conf
rm -rf /etc/vk/0000040c.kle
rm -rf /usr/lib/gstreamer-1.0/libgstifdsrc.so
rm -rf /usr/bin/cmdwrap
rm -rf /usr/bin/duk
rm -rf /usr/bin/e2ibox
rm -rf /usr/bin/exteplayer3
rm -rf /usr/bin/f4mdump
rm -rf /usr/bin/fullwget
rm -rf /usr/bin/gstplayer
rm -rf /usr/bin/hlsdl
rm -rf /usr/bin/rtmpdump
rm -rf /usr/bin/uchardet
rm -rf usr/lib/enigma2/python/Plugins/Extensions/IPTVPlayer/bin/cmdwrap
rm -rf usr/lib/enigma2/python/Plugins/Extensions/IPTVPlayer/bin/duk
rm -rf usr/lib/enigma2/python/Plugins/Extensions/IPTVPlayer/bin/hlsdl
tar -zxvf /tmp/TS-E2iplayer-2020.05.13.02.tar.gz -C /
rm -rf /tmp/TS-E2iplayer-2020.05.13.02.tar.gz
opkg update
opkg install exteplayer3
sync
reboot
gilly77 take my version that works and do everything as in the instructions
freddy88 added a new file:
QuoteDisplay MoreTS-E2iplayer-2020.05.13.02 Server maxbambi2 (Maxbambi is back)
Package: enigma2-plugin-extensions-Ts-E2iplayer
Version: TS-E2iplayer-2020.05.13.02.tar.gz
Section: Other
Priority: optional
Architecture: everything
Maintainer: I'm rolfi88 at gitlap and for Nachtfalke and Linuxsat I am freddy88
Repo: Maxbambi = https://gitlab.com/maxbambi/e2iplayer
Description: TS-E2iPlayer / IPTV Player for Enigma2
OE: 2,0
Royalty
Depends on: Python Requests (PyCurl - FFmpeg)
My version is automatically kept up-to-date by updates (set maxbambi to maxbambi server and package types in all types at settings) or version file update fixed by me in the forum. Download here.
!!! Delete old version before !!!
TS-E2iplayer-2020.05.13.02.tar.gz
Gitlab repo maxbambi and works error-free
This version contains which I built myself
Dependency folder iptvplayer_rootfs (PyCurl and FFmpeg) has beenrepaired
and the hosts xxx and tsiplayer and the host Hdfilme.Tv
And was corrected by me from hdfilme.net to hdfilme.cc to hdfilme.cx
Maxbambi's update server has been changed from
old https://gitlab.com/maxbambi2/e2iplayer
To
new https://gitlab.com/maxbambi/e2iplayer
Info:
Only with my new version are updates possible in the future because the old repo is no longer updated
Therefore, please use the latest version of me so that updates will work from the new repo in the future
It has also been replaced the folder contents iptvplayer_rootfs (dependency folder PyCurl - FFmpeg) the old files with the latest files fromme. and thus updated.
Change fix:
All of the following binaries are now always in path usr/bin/
cmdwrap, duk, e2ibox, exteplayer3, f4mdump,fullwget, ffmpeg, gstplayer, hlsdl, rtmpdump, uchardet
and the file libgstifdsrc.so is in /usr/lib/gstreamer-1.0/
and PyCurl-FFmpeg in iptvplayer_rootfs folder in the root directory
Simply enter the following by Telnet command and confirm it at the end with Enter. For complete deletion without the file in the tmp root pond and for installation, the file must first be in the tmp root.
All old leftovers Old files of Iptvplayer,Tsiplayer, E2istream ,E2iplayer and my created player Ts-E2iplayer (maxbambi Zadmario and so on, is included) are completely deleted.
If you don't want to have the grouping of TS-E2iplayer (it will then become the old grouping again
I think my grouping is best suited for the version of T2-E2iplayer that is mine. Is from Tsiplayer.
Simply delete with Telnet with Putty program
rm -rf /etc/enigma2/iptvplayerarabicgroup.json
rm -rf /etc/enigma2/iptvplayerfrenchgroup.json
rm -rf /etc/enigma2/iptvplayerhostsgroups.json
rm -rf /etc/enigma2/iptvplayerhostsorder
rm -rf /etc/tsiplayer_xtream.conf
rm -rf /etc/vk/0000040c.kle
Info:
With the following Telnet command, everything is first deleted from Player (see above) and then and finally the Ts-E2iplayer is installed by itself. (these scrips are final version) Device then restarts. And my player is to be seen in the extensions. You don't need to install binaries:
This message doesn't come at all (and if you press ok 1 times and all dependencies are already available in my version.
Information:
E2iplayer needs more handles.
How to download and install more binaries
Press Ok for Start.
All binaries are already installed with my version
Simply copy the file TS-E2iplayer-2020.05.13.02.tar.gz with Ftp Tool like FileZilla or Dreambox Control Center (DCC) into the root directory into the folder tmp of your device. Ftp program and Telnet must remain open together.( do not close)
Very important my Scrips (Telnet commands only work with PuTTY and not at all with Dreambox Control Center. My script is just too long for DCC (too large)
Then run the following Telnet command:
init 4
sed -i '/config.plugins.iptvplayer/d' /etc/enigma2/settings
rm -rf /usr/lib/enigma2/python/Plugins/Extensions/IPTVPlayer
rm -rf /usr/lib/enigma2/python/Plugins/Extensions/settloader
rm -rf /usr/lib/python2.7/site-packages/pycurl.so
rm -rf /hdd/IPTVCache
rm -rf /media/hdd/IPTVCache
rm -rf /iptvplayer_rootfs
rm -rf /etc/enigma2/iptvplayerarabicgroup.json
rm -rf /etc/enigma2/iptvplayerfrenchgroup.json
rm -rf /etc/enigma2/iptvplayerhostsgroups.json
rm -rf /etc/enigma2/iptvplayerhostsorder
rm -rf /etc/tsiplayer_xtream.conf
rm -rf /etc/vk/0000040c.kle
rm -rf /usr/lib/gstreamer-1.0/libgstifdsrc.so
rm -rf /usr/bin/cmdwrap
rm -rf /usr/bin/duk
rm -rf /usr/bin/e2ibox
rm -rf /usr/bin/exteplayer3
rm -rf /usr/bin/f4mdump
rm -rf /usr/bin/fullwget
rm -rf /usr/bin/gstplayer
rm -rf /usr/bin/hlsdl
rm -rf /usr/bin/rtmpdump
rm -rf /usr/bin/uchardet
rm -rf usr/lib/enigma2/python/Plugins/Extensions/IPTVPlayer/bin/cmdwrap
rm -rf usr/lib/enigma2/python/Plugins/Extensions/IPTVPlayer/bin/duk
rm -rf usr/lib/enigma2/python/Plugins/Extensions/IPTVPlayer/bin/hlsdl
tar -zxvf /tmp/TS-E2iplayer-2020.05.13.02.tar.gz -C /
rm -rf /tmp/TS-E2iplayer-2020.05.13.02.tar.gz
opkg update
opkg install exteplayer3
sync
reboot
Info: Device automatically restarts after confirming this command with Enter.
Before the 1 start of e2iplayer please check whether at servieceapp the number behind the entry
Exteplayer3 not 68 is called but 50
50 must stand there because at 68 hangs Hdfilme.
Hdmovies you have to when you watch a movie and then pause spool back even after pause (2 sec or so) otherwise it crates and sound and image are then no longer synchronous.
If you have made an update in the open atv then always repeat installation of my player so that at service app always stands 50 and not 68.
You can also easily add the serviceapp to original or it commplett.then hdfile runs error-free without getting stuck even after pause it continues without problems the movie. I uninstalled it because it disturbed e2iplayer the exteplayer3. Then you don't have to repeat my telnet command after openatv update.
You should first select the usr/bin folder to back up including plugins and etc enigma2 settings.so that it is restored
If you want to keep all settings then you do not have to execute the sed command telnet sed -i '/config.plugins.iptvplayer/d' /etc/enigma2/settings because if you execute it it always resets the player setting to default setting.
Generally, I am suggesting that with my instalation you always reset the settings with sed -i '/config.plugins.iptvplayer/d' /etc/enigma2/settings because then it is commlet re-installed with settings. And old settings don't bother. einstellungen
Everything is quickly set up again. And if you use the web interface of e2iplayer it is easier to enter passwords or login data.
The following are my settings from etc - enigma2 - copied out at settings
config.plugins.iptvplayer.aac_software_decode=true
config.plugins.iptvplayer.ac3_software_decode=true
config.plugins.iptvplayer.alternativeARMV7MoviePlayer=exteplayer
config.plugins.iptvplayer.alternativeARMV7MoviePlayer0=exteplayer
config.plugins.iptvplayer.autoCheckForUpdate=false
config.plugins.iptvplayer.autoplay_start_delay=0
config.plugins.iptvplayer.buforowanie_m3u8=false
config.plugins.iptvplayer.cmdwrappath=/usr/bin/cmdwrap
config.plugins.iptvplayer.dailymotion_localization=de_DE
config.plugins.iptvplayer.ddlme_lang=de
config.plugins.iptvplayer.defaultARMV7MoviePlayer=exteplayer
config.plugins.iptvplayer.defaultARMV7MoviePlayer0=exteplayer
config.plugins.iptvplayer.deleteIcons=0
config.plugins.iptvplayer.disable_live=true
config.plugins.iptvplayer.dts_software_decode=true
config.plugins.iptvplayer.dukpath=/usr/bin/duk
config.plugins.iptvplayer.eac3_software_decode=true
config.plugins.iptvplayer.exteplayer3path=/usr/bin/exteplayer3
config.plugins.iptvplayer.extplayer_summary=no
config.plugins.iptvplayer.f4mdumppath=/usr/bin/f4mdump
config.plugins.iptvplayer.gitlab_repo=maxbambi
config.plugins.iptvplayer.gstplayerpath=/usr/bin/gstplayer
config.plugins.iptvplayer.hdfull_language=en
config.plugins.iptvplayer.hlsdlpath=/usr/bin/hlsdl
config.plugins.iptvplayer.hostipla=true
config.plugins.iptvplayer.IPTVWebIterface=true
config.plugins.iptvplayer.laola1tv_language=de
config.plugins.iptvplayer.movie4kto_language=de
config.plugins.iptvplayer.mp3_software_decode=true
config.plugins.iptvplayer.myjd_login=
config.plugins.iptvplayer.myjd_password=
config.plugins.iptvplayer.plarform=armv7
config.plugins.iptvplayer.possibleUpdateType=all
config.plugins.iptvplayer.preferredupdateserver=2
config.plugins.iptvplayer.rtmpdumppath=/usr/bin/rtmpdump
config.plugins.iptvplayer.serienstreamto_login=
config.plugins.iptvplayer.serienstreamto_password=
config.plugins.iptvplayer.skylinewebcams_lang=de
config.plugins.iptvplayer.sportstream365_language=de
config.plugins.iptvplayer.uchardetpath=/usr/bin/uchardet
config.plugins.iptvplayer.usepycurl=true
config.plugins.iptvplayer.wgetpath=wget
config.plugins.iptvplayer.xxxwymagajpin=false
config.plugins.iptvplayer.ZablokujWMV=false
Info:
Always leave it on gitlab maxbambi (update server) when setting. Only there does Hdfilme.cx work
When setting the Iptvplayer, you should not set package types to source, but in all ways. All species is even better than just source and better than pre-compolished..
Maxbambi writes on his page
Select the update server Gitlab
Choose my nickname: maxbambi (you can also choose original e2i (no longer updated) or other forks)
Select all file types in packages instead of just being precompiled
Update and click the first Gitlabitem in the list.
Hdfilme still works after update but only with maxbambi
I will always fix my version as soon as I find out the bugs. My version works error-free. It is the same setting menu as included by Maxbambi. The Maxbambi updates are more up-to-date than Zadmario from the hosts.
I have a Dreambox dm920 4k with image Open Atv 6.4
now openatv 6.4 image is on it and before that newnigma 2 image was on it
my version is also available under the following links
see link from Linuxsat forum
and link from the Nachtfalke forum
https://www.nachtfalke.biz/vbdownloa...wnloadid=36643
Enjoy my latest version
:popcorn1::popcorn1:
Select the update server Gitlab
Choose nickname: maxbambi (You can also choose original e2i (no longer updated) or other forks)
select all file types in packages instead of just precompiling
Update and click on the first Gitlabelement in the list.
what do you mean ?? Automatic updates work without error message
linuxsat-support.com/filebase/file/496/
Display MoreI have some problems with the latest E2iplayer versions on OpenATV 6.3 and Vu+ Solo2.
Firstly, at start I get the message that Duktape is deprecated and it needs to be updated, but when I select Yes nothing happens and the message appears over and over again, and to continue to open the plugin I have to choose No.
Then, any section/group I choose I get the message ”There is no hosts in this group” and all the sections (Movies, Cartoons, Music, Sport, Live, English, Polish, French and so on) are empty.
I also tried to install E2iStream after I uninstalled E2iplayer, but it doesn't install no matter if I tried to install from ipk file, SatVenus Panel or OpenATV plugin feed. I would really appreciate some help. Thank you!
you are right friend I (VUsolo2-Blackhole) have some problem but no one seems to fix the ipk provided here in filebase by "egj_soldier"
so look how i work around and make work this very usefull plugin created by always appriciated "samsamsam"
you can download the entire plugin (all folders) from gitlab link of the other appriciated collaborator mosz_nowy:https://gitlab.com/mosz_nowy/e…ster/e2iplayer-master.zip
ftp and go to: usr/lib/enigma//python/plugin/extension/IPTVPlayer and delete this folder if it exist as a former installation
decompress the zip file and ftp the content of (e2iplayer-master) folder in : usr/lib/enigma//python/plugin/extension
as result you'll have : folder named "IPTVPlayer" and files (README.md) (setup.py) (setup_translate.py)
at this point restart GUI and go to green panel and you will find in the plugin list the desired plugin
attention do not try to update the plugin with the function inside plugin ...no...no.. it makes download the update from the gitlab link by zadmario
and this makes turning back to problems (duktape issue..and etc) no....no...no.. do not try
to date I don't know why theese valid coders have not yet fixed this big issue
hope I have helped you and hope someone(zadmario,egj-soldier) will read our complainings and fix the plugin
hi to all
which plugin called green panel is meant ?? Where can I download it ??
Ok I now understand what they meant. Yes it is true these modules Hdfilme.tv and Hd-streams.org (hosthdfilmetv.py and hosthdstreams.py must necessarily be repaired as they said to fix the problem and thus Hdfilme.tv and Hd- streams.org work again. Thank you for your help
Display More.
Please,you can reapair
hd-streams.org ("No valid links available") and synonymous with hdfilme.tv ("No valid links available") does not work
Thanks for the repair
I've not taken over the plugin, I'm just contributing. I only use BBC iPlayer. All the plugin source is available here: https://gitlab.com/e2i/e2iplayer.
These are the modules that you probably need to fix for those two:
https://gitlab.com/e2i/e2iplay…er/hosts/hosthdstreams.py
https://gitlab.com/e2i/e2iplay…er/hosts/hosthdfilmetv.py
:thumbup:
Sorry but this tip does not work Hdfilme.tv and Hd-streams.org. furthermore, there is the error
Please, you can reapair
hd-streams.org ("No valid links available") and synonymous with hdfilme.tv ("No valid links available") does not work
Thanks for the repair
But thanks RonSwanson you wanted to help but it still does not work
hd-streams.org ("No valid links available") and synonymous with hdfilme.tv ("No valid links available") does not work
Thanks for the repair