Posts by uncle-nice

My cccam on the box keeps connect then diconnect after few second what am i doing wrong below is my cccam config and other settings

SERVER LISTEN PORT : *****
WEBINFO USERNAME : *****
WEBINFO PASSWORD :*****
TELNETINFO USERNAME : *****
TELNETINFO PASSWORD : ******
TELNETINFO LISTEN PORT : 16000
WEBINFO LISTEN PORT : 16001
ZAP OSD TIME : 3
OSD USERNAME :***** left this as default
OSD PASSWORD : ****** left this as default
OSD PORT : 80
#SHOW TIMING : yes
#MINI OSD : yes
DEBUG : yes
NEWCAMD CONF : no
#DISABLE EMM : yes
#EXTRA EMM LEVEL : yes
#SOFTKEY FILE : /var/keys/SoftCam.Key
#AUTOROLL FILE : /var/keys/AutoRoll.Key
#STATIC CW FILE : /var/keys/constant.cw
#CAID PRIO FILE : /var/etc/CCcam.prio
PROVIDERINFO FILE : /var/etc/CCcam.providers
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
MINIMUM CLIENT VERSION : 1.7.0
MINIMUM DOWNHOPS: 1
SERIAL READER : /dev/ttyS0
SMARTCARD CLOCK FREQUENCY : /dev/ttyS0 3570000
TRY ALL CHIDS : /dev/ttyS0

N: 127.0.0.1 10000 test1 test2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

[global]
logfile = /var/log/oscam.log
cachedelay = 120
nice = -1
preferlocalcards = 1

[newcamd]
port = 1****@0963:01****
key = 0102030405060708091011121314
keepalive = 1

[webif]
httpport = 8888
httpuser = *****
httppwd = ******
httprefresh = 5
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
httpdyndns = ********.dyndns.info
httphideidleclients = 1

[account]
user = *****
pwd = *****
group = 1
monlevel = 0
au = ***uk
services = entertainment_extra_and_***_anytime+
caid = 0963
ident = 0963:01****
keepalive = 1

[reader]
label = reader-2
protocol = mouse
device = /dev/ttyUSB0
device_out_endpoint = 0x81
services = entertainment_extra_and_***_anytime+
caid = 0963
ecmwhitelist = 3E,4F,42,44,45,47,4E,53,54,56,61,67,62,68,69,6A,FFFFFFFF,6E,6D,6F,71,72,73,77,78,79,7A,7C,7D,7E,80
detect = cd
mhz = 357
cardmhz = 357
ident = 0963:01*****
group = 2
emmcache = 1,3,2
blockemm-unknown = 1
saveemm-unknown = 1
ccchop = 1
auprovid = 1F1F1F

If my usb detail is on server: Bus 002 Device 003: ID 1004f:0001
What will i put here as usb port no:/dev/ttyS

Quote from seamouse

uder reader u can set the volts

Sorry mate didnt reply on time what do you mean set the volt

if pull the card out i get disconnected and My Oscam doesnt have mhz = 357 or cardmhz = 357 this strange my reader status says unknown by the way am on debian server 6 Unix starttime: 1345324613
Starttime: 18.08.2012 22:16:53
Version: 1.20-unstable_svn Rev. 7209
Max PID: unlimited

Mr Ten Below

my package is Entertainment Extra and *** Anytime+

now this thread your talking about this http://linuxsat-support.com/os…uk-sid-assign-reject.html

ok after my hard work i finally did it as you can see below Entitlement info but i dont have full package only entertainment is that why am still channelscrambled even on *** 1 which am subscribe on ok guys help me out to close the book on this chapter please.

Welcome to CCcam 2.1.3 server

card reader /dev/ttyS0
handled 0(0) ecms and 0(0) emms
Nds card 3688ea1

Entitlement info
003 29-09-2012
00b 29-09-2012
0010 29-09-2012
001d 29-09-2012
b765 29-09-2012
b766 29-09-2012
b772 29-09-2012
b773 29-09-2012
b846 29-09-2012
b860 29-09-2012
b968 29-09-2012

18/08/2012 23:08:04 B72049A0 c sa*** (0963&010***/0000/125D/62:7A90): not found (120 ms) by ***uk
18/08/2012 23:08:06 B72049A0 c sa*** (0963&010***/0000/125D/62:7A90): not found (120 ms) by ***uk
18/08/2012 23:08:09 B72049A0 c sa*** (0963&010***/0000/125D/62:8BA7): not found (120 ms) by ***uk
18/08/2012 23:08:11 B72049A0 c sa*** (0963&010***/0000/125D/62:8BA7): not found (120 ms) by ***uk
18/08/2012 23:08:13 B72049A0 c sa*** (0963&010***/0000/125D/62:8BA7): not found (120 ms) by ***uk
18/08/2012 23:08:15 B72049A0 c sa*** (0963&010***/0000/125D/62:8BA7): not found (120 ms) by ***uk

[global]
logfile = /var/log/oscam.log
cachedelay = 120
nice = -1
preferlocalcards = 1

[newcamd]
port = 10***@0963:010***
key = 0102030405060708091011121314
keepalive = 1

[webif]
httpport = 8888
httpuser = *****
httppwd = *****
httprefresh = 5
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
httpdyndns = myserver.dyndns.info
httphideidleclients = 1

[account]
user = ****
pwd = *****
group = 1
monlevel = 0
au = ***uk
caid = 0963
cccignorereshare = 0

1 USB Infinity Phoenix problem

Hi this morning I asked myself how had can this be now i rebuilt the Ubuntu Oscam i got it running i get connected as you can see my log file below now as you can see my infinity phoenix still cant connect i changed all the USB port physical plus no is connected front port but don’t what i will call this port Bus 002 Device 004: ID 104f:001

4cd58.jpg

2012/08/16 22:51:10 7C003120 r ***uk [mouse] Cannot open device: /dev/ttyUSB1
2012/08/16 22:54:58 1928EE0 c client connected to 10002 port
2012/08/16 22:54:58 1928EE0 c encrypted newcamd:10***-client 82.19.**.*** granted (test, au=off)
2012/08/16 22:54:58 1928EE0 c user test authenticated successfully (generic)
2012/08/16 22:54:58 1928EE0 c AU disabled for user test
2012/08/16 23:00:07 1928EE0 c test (0963&010***/0000/1268/62:5AAB): rejected user ident (1 ms) (0/0/0/0) (no card support 0963:010***)
2012/08/16 23:07:14 8C0008C0 h Refresh Clients requested by WebIF from 192.168.0.4
2012/08/16 23:07:21 8C0008C0 h Refresh Clients requested by WebIF from 192.168.0.4
2012/08/16 23:08:11 8C0008C0 h Refresh Clients requested by WebIF from 192.168.0.4
2012/08/16 23:08:19 8C0008C0 h Refresh Clients requested by WebIF from 192.168.0.4
2012/08/16 23:08:27 1928EE0 c test (0963&010***/0000/1268/62:EB88): rejected user ident (1 ms) (0/0/0/0) (no card support 0963:010***)
2012/08/16 23:12:25 1928EE0 c test (0963&010***/0000/1268/62:3493): rejected user ident (1 ms) (0/0/0/0) (no card support 0963:010***)
2012/08/16 23:12:33 8C0008C0 h Refresh Clients requested by WebIF from 192.168.0.4
2012/08/16 23:14:08 1928EE0 c test (0963&010***/0000/1268/62:E711): rejected user ident (1 ms) (0/0/0/0) (no card support 0963:010***)
2012/08/16 23:15:15 8C0008C0 h Refresh Clients requested by WebIF from 192.168.0.4
2012/08/16 23:15:16 1928EE0 c test (0963&010***/0000/1268/62:6D59): rejected user ident (1 ms) (0/0/0/0) (no card support 0963:010***)

2 ten below tut confusing me

the part i copy below where do you put this info sorry if i ask to many question but it took long before i figure out that i needed to change username and password on cccam.config
To optimize your servers performance and security there are some other settings to add to both the c & f lines,I recommend you start with the following on your flines

F: linuxsat 10Bel0w 2 0 0 { 0:0:2 } { } { } yorpeersdnsaddress

This will give you the best performance i will now try and explain what these numbers mean

The 2 0 0

The 2 means that the peer will get all cards at a maximum of 2 hops away from you.

The first 0 means that the peer gets no emus from you. Change to 1 to get peer?s emu.

The other 0 means that the peer is not allowed to send us emm. Change to 1 to take peer?s emu. Please note that there has to be a corresponding entry in the in the server you are sharing with.Cccam is capable of its own emu these are the optimal settings.

The { 0:0:2 }

The 2 means that the peer can reshare your card once.Change to 1 for no reahsare,3 for 2 reshare ect,ect.

The IP or DNS address at the end of the F line

The IP Address at the end of the F:line makes sure that only the specified peer connects to your server. This is known as locking the fline and is very important against hackers.

Cccam is capable of its own emu work so there is no point using your peers or vice versa.
The safest way to share is receive emm from only the person you trust most - YOURSELF

Extra cline settings

You should resrtict the amount of hops you receive from your peers as anything above hop 3 is virtually unwatchable,ideally you want to using hop1 and 2 only this is done by adding the following after the cline you recieve from your peer.

No { 0:0:2 }
This means you recieve your peers local and hop 1
if you are sharing without a local make this No { 0:0:3 }

Later on
Once you have most of the cards you want in hop1 and there are still some hop2 cards you use it is possible to take only the cards you want from hop2 to further improve the speed of your server.To do this add the caid of the provider like this

C: anyone.dyndns.org 12000 anyuser anypass no { 0:0:1, 0963:0:2, 093b:0:2 }

This takes the peers local plus sly uk & sly italia from hop 2

as you can see am connected plus all my friends are connected to my server connected card 1 but channels say scrambled what did i miss or doing wrong
c7203b9d416.jpg

my configuration

[global]
logfile = /dev/null
nice = -1
preferlocalcards = 1

[monitor]
hideclient_to = 15
appendchaninfo = 0

[newcamd]
port = 10***@0963:010***
key = 0102030405060708091011121314

[webif]
httpport = 8888
httpuser = *****
httppwd = *****
httprefresh = 5
httpallowed = 127.0.0.1,192.168.0.0-192.168.0.254
httpdyndns = myserver.dyndns.info

[global]
logfile = /dev/null
cachedelay = 120
nice = -1

[newcamd]
port = 10***@1234:000005
key = 0102030405060708091011121314

[cccam]
port = 100***
version = 2.0.11
nodeid = 7F836E07102F13EA

[webif]
httpport = 8888
httpuser =*****
httppwd = *****
httprefresh = 5
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
httpdyndns = *******.dyndns.info
httphideidleclients = 1

Does the above make any sense lol

Quote from mrgmx

You will have to elobarte a bit more buddy?

How may Cards? You say your card reader is disabled but mention Card 1????

So your box is connected and online ....but User out of your Network is Offline??????

Need some more info mate! or Configs? (omit any sensitive info)

Display More

I only have one card S**UK reader phoenix USB/Serial when i disconnect the from reader my box disconnects and 0 card this is nightmare

# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn build #7209
# Read more: http://streamboard.de.vu/svn/o…on/doc/txt/oscam.conf.txt

[global]
logfile = /dev/null
cachedelay = 120
nice = -1

[newcamd]
port = 10***@1234:000005
key = 0102030405060708091011121314

[cccam]
port = 100***
version = 2.0.11
nodeid = 7F836E07102F13EA

[webif]
httpport = 8888
httpuser =*****
httppwd = *****
httprefresh = 5
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
httpdyndns = *******.dyndns.info
httphideidleclients = 1

Does the above make any sense lol

seems like i connected through serial because when i take off the card fro the reader it disconnect the on the box

15/08/2012 22:21:45 B7006908 c thread B6FCFB70 ended!
15/08/2012 22:21:45 B70081F8 c WARNING: invalid client tcp_conn_close()
15/08/2012 22:21:45 B70081F8 c anonymous disconnected from 82.19.**.**
15/08/2012 22:21:45 B70081F8 c thread B6FC3B70 ended!
15/08/2012 22:21:57 B7006908 c client connected to 100** port
15/08/2012 22:22:17 B7006908 c WARNING: invalid client tcp_conn_close()
15/08/2012 22:22:17 B7006908 c anonymous disconnected from 82.19.**.**
15/08/2012 22:22:17 B7006908 c thread B6FC3B70 ended!
15/08/2012 22:23:28 B7006908 c client connected to 100** port
15/08/2012 22:23:48 B7006908 c WARNING: invalid client tcp_conn_close()
15/08/2012 22:23:48 B7006908 c anonymous disconnected from 82.19.**.**
15/08/2012 22:23:48 B7006908 c thread B6FC3B70 ended!
15/08/2012 22:23:49 B70081F8 c client connected to 100** port
15/08/2012 22:23:49 B70081F8 c encrypted newcamd:100**-client 82.19.**.** granted (sae**, au=off)
15/08/2012 22:23:49 B70081F8 c user sae** authenticated successfully (generic)
15/08/2012 22:23:49 B70081F8 c AU disabled for user sae**
15/08/2012 22:25:52 B70081F8 c user sae** reached 120 sec idle limit.

Am using debian strange thing my box is connected card 1 but on server my cardreader is disabled plus user is offline this is confusing

sorry Debain strange thing is my card reader is disable but am connected card 1 through Newcamd this confusing and and user on my server says offline but on box connected card 1.

Quote from mrgmx

The file should be in var/etc

edit the Cccam.channelinfo file in something like Notepad ++ (download if you havent got)
(use something like winscp and login to server....locate the file and edit)

Copy and paste the latest ChannelInfo from Thatfellow link into the file you have opened. (Just Cccam.channelinfo)

Save it and it should be updated....may need to restart Cccam though to get it going/reading!

Let us know how you get on!

Nice Profile Pic :rasta2bigsmoke0gf:

Display More

Thanks m8 but i checked on var/etc the channel.info is not in there but i edited and copy it in there anyway see what will happened lol but still say scrambled :doubt:

I got almost everything running after flashed ubuntu 12.4, debian works for me i got connect even on my box spiderbox7000hd box connect card 1 but when i change to cccam connect then disconnect after 10 second so i left it on newcamd but channel still say scrammbled is there anything i was suppose to update on server like channel info etc..?

Hi Guys

My second week been trying to read the post try to doing my self am new on this so please be easy on am running Ubuntu 12.4

OSCAM 1.20-unstable_svn build #7149
CCcam 2.1.3 server
how configure i used tut from very easy to follow thank
http://linuxsat-support.com/os…am2-1-3-s%2Ay-uk-ipk.html

Welcome to CCcam 2.1.3 server

Server connections: 1
+----------------------+------------+-------+--------+----------------+-------+-------------------------------+
| Host | Connected | Type | Version| NodeID | Cards | CAID/Idents |
+----------------------+------------+-------+--------+----------------+-------+-------------------------------+
|127.0.0.1:10000 | |newcamd| | | 0 | |
+----------------------+------------+-------+--------+----------------+-------+-------------------------------+

RROR: Opening device /dev/ttyUSB1 (errno:2 No such file or directory)
2012/08/14 23:58:25 FA4EA0 r ***uk [internal] Cannot open device: /dev/ttyUSB1
2012/08/14 23:59:25 FA4EA0 r ***uk [internal] ERROR: Opening device /dev/ttyUSB1 (errno:2 No such file or directory)
2012/08/14 23:59:25 FA4EA0 r ***uk [internal] Cannot open device: /dev/ttyUSB1
2012/08/15 00:00:25 FA4EA0 r ***uk [internal] ERROR: Opening device /dev/ttyUSB1 (errno:2 No such file or directory)
2012/08/15 00:00:25 FA4EA0 r ***uk [internal] Cannot open device: /dev/ttyUSB1
2012/08/15 00:01:25 FA4EA0 r ***uk [internal] ERROR: Opening device /dev/ttyUSB1 (errno:2 No such file or directory)
2012/08/15 00:01:25 FA4EA0 r ***uk [internal] Cannot open device: /dev/ttyUSB1
2012/08/15 00:02:25 FA4EA0 r ***uk [internal] ERROR: Opening device /dev/ttyUSB1 (errno:2 No such file or directory)
2012/08/15 00:02:25 FA4EA0 r ***uk [internal] Cannot open device: /dev/ttyUSB1
2012/08/15 00:03:25 FA4EA0 r ***uk [internal] ERROR: Opening device /dev/ttyUSB1 (errno:2 No such file or directory)
2012/08/15 00:03:25 FA4EA0 r ***uk [internal] Cannot open device: /dev/ttyUSB1

My Provider = S**UK
Reader Infinity USB/Serial tut followed:http://linuxsat-support.com/li…grammer-debian-cccam.html

but i cant get any joy my connection on tv keeps saying every few second Connect then Disconnect card 0

what am i doing wrong please help thanks.

Hi mates
Regarding boxid=XXXXXX (to generate this, take your box serial number, drop the last digit and convert to HEX) these serial no are in HEX already and they is to barcoded number is it the one starts with 16 on top says made in China please advise.

Thanks

Hi guys am new on this please be easy on I done everything according to the tutorial but now where will I go from their how do I make my server visible to my friend the other end am lost since I got everything running without any problem please help thanks