You can use Coreelec with Tvheadend on a SD-Card or USB-Stick to check if Tuner works without Problems.
If this works fine then is your Problem the Mecool-Firmware.
You can use Coreelec with Tvheadend on a SD-Card or USB-Stick to check if Tuner works without Problems.
If this works fine then is your Problem the Mecool-Firmware.
The best will be, flash your KIII Pro complete new with the Full-image, with Amlogic Burn Card Maker for SD-card.
The KIII_PRO_AVL6862-NHG47L-20181221.165922.V0213.img (1,1GB) is the latest Full-image i have found.
My own K3Pro has the Fw "KIII PRO-userdebug 7.1.2 NHG47L 20180321.121032.V0213" since i have the box bought.
I had never problems with DVB-C or DVB-S or Heat-reboots, and so i have never updatet (Never change a running system).
You can open your box for trying, without the housing it is less hot, no heat build-up.
When it is better, then you can build with old parts from graphic card or cpu cooler fan.
As Example on a KII Pro with old Geforce fan.
@ hermes46
With 2.4 Ghz Airmouse it will not better.
The Dtv app from K7 will not work on KIII Pro.
You can try the Dtv app from "KIII_PRO_AVL6862-ota-20190301.101936.V0213" but i dont know if this help you.
1-The receiver works on cable channels and suddenly it stops and turns off, and you have to turn it on again from the electricity and not from the remote and so on all the time.
I think it is a Heat Problem, the best will be a active Fan, like a PC-CPU Cooling Fan.
Just install the actual Firmware "K7-ota-V2.20200811.121244" from Usb-Stick. The embedded Dtv-App work with DVB-C.
Quoteit is not the same....i cant boot from usb....maybe need fix aml.autoscript for k1 pro.....did you try boot from usb?
Yes you are right, only Coreelec boot from usb, openpli/openvision/vitmod boot only from sd-card.
I dont know what you mean with ''your sd-card slot is broken''. If only the ''snap-in function'' is defect, you can try to use a sd-card-extender, if you attach it maybe with glue or something.
Es gibt keine v7.1.3 Firmware für die Mecool KIII, die aktuellste Version ist v7.1.2 !
Es gab weder einen Screenshot noch einen Upload irgendwo, nur die Behauptung.
-
There is no v7.1.3 Firmware for the Mecool KIII, current Version ist v7.1.2 !
There was no screenshot or upload anywhere, just only claimed.
Oscam is working on Mecool K7.
Have you tried the original Firmware or just your backup ?
You can try KIII_PRO_AVL6862-NHG47L-20180908.182748.V0213.img if you have the old hardware-version from 2018.
The Mecool KI pro, KII pro and KIII pro was produced a long Time and the latest produced devices have different Hardware (Tuner etc) .
User with old devices can't use the latest Firmware, the fixed it with the dtv.apk from the old firmware.
But i don't think that this is your problem, i have never read that everyone with the Mecool M8S plus dvb-s or dvb-t has problems with different Hardware (Tuner).
They have produced the 'M8S plus dvb' as 'Mecool M8S PLUS DVB S2 1GB 8GB Amlogic S905D' (40$) and now as 'Mecool M8S PLUS DVB S2 2GB 16GB Amlogic S905X2' (50$).
I think your Problem is maybe a unsuccessfull Update.
Was the box ok before you have updated ?
As Example, i had the some problem (maybe like you) on the Mecool K7 (wlan not usable) with Firmware v2.20190831, after update with ota-file 'K7-ota-V2.20191015.113941' all looks ok, about/info says version v2.20191015 but the mistake/error was the same (wlan not usable). Only flash the Fullimage/Firmware 'K7_AVL6862-PPR1.180610.011-V2.20191015.113941.img' fixed the problem.
The Mecool K7 is/will not supported from Coreelec because they don't have the tuner driver.
If you sure that you have the ''Mecool M8S PLUS DVB S2 1GB 8GB Amlogic S905D'' and the ota updatefile has not fixed the error, you should flash the Fullimage M8S_PLUS_DVB_RS6060-NHG47L-20190226.104739.V0213.img. Try it with the Amlogic USB Burning Tool with a 'usb-a to usb-a cable' . I dont know which usb-port is the right (bootable) one. The Resetbutton should inside/behind the AV socket (use a toothpick).
...enigma2 for k1 pro on usb flash becouse my sd card sloth is broken...
It is the same, you can boot from usb or sd-card.
Yes you are right, only Coreelec boot from usb, openpli/openvision/vitmod boot only from sd-card.
Mecool M8S PLUS DVB S2 2GB 16GB Amlogic S905X2
or
Mecool M8S PLUS DVB S2 1GB 8GB Amlogic S905D ?
Wich Firmware ?
As Example ''M8S_PLUS_S905D_DVB_RS6060-ota-20190226.104739.V0213.zip'' is the Firmware for the old M8S plus.
misunderstanding
Quotecan not install it on corelec kIII pro
here works fine, CE 9.0.3 and Tvh 4.3 on S*y Astra (ok with vitmod too)
you changed in /storage/.kodi/addons/service.softcam.oscam/bin/ ?
chmod755 ?
the latest K3 DTV is v1.0 with supercam (OSCam r11390)
the latest K6 DTV is v4.2 without supercam, after installation of ''supercam-Hi3798MV200-V3'' (OSCam r11429)
both 'very old' oscam versions, and waiting for updates from mecool is like waiting for world peace
This image was created from a ''KI pro'' owner, so is the included ''dtb.img'' for a ''KI pro'' .
Delete the ''dtb.img'' on the tf-card, dowload dtb-7z (dtb.img for KIII pro) and copy the extracted ''dtb.img'' on the tf-card.