Hi, I see unnecessary request flowing to my cards where the ECM are not found. This causes unwanted load on the cards.
Is there a way to timeout a user after a number of not found ECM?
Even that I am using the loadbalancer and services between my two readers (Using newcamd with 2 ports), if the ECM is found using port A, how can
I timeout the other port B or ensuring that only a specific port is used?
Thanking you.
Also, when ident was removed, I started getting high ECM times and there were frequent channel freezes.
Hi, am using a Nagra kudelski card. Just removed the ident under the readers. Do I need to remove under the users too?
I wanted to loadbalance between the 2 cards. They have identical CAIDs but different bouquets. As for the reponse time, I don't why it is this much. I currently run around 60 users. Maybe its too much? Or the reader, I am using an Omnikey.
Thanking you in advance
Changed my setup. I am currently using 2 cards with CAID 0100 but the channels list is not the same.
Here is the dump2.txt from the log.
Please advise.
[global]
logfile = /var/log/oscam/oscam.log
clienttimeout = 10000
fallbacktimeout = 5000
netprio = 18
unlockparental = 1
nice = -10
maxlogsize = 2000
preferlocalcards = 1
block_same_ip = 0
block_same_name = 0
usrfile = /var/log/oscam/oscamuser.log
cwlogdir = /var/log/oscam/cw.log
emmlogdir = /var/log/oscam/emm.log
lb_mode = 10
lb_save = 1000
lb_max_ecmcount = 2000
lb_reopen_invalid = 0
lb_force_reopen_always = 1
lb_retrylimit = 1500
lb_stat_cleanup = 48
lb_max_readers = 2
lb_auto_betatunnel = 0
lb_savepath = /usr/local/stat
lb_nbest_percaid = 0100:2
disablecrccws = 1
[cache]
max_time = 1000
[newcamd]
port = xxxx@0100:000000,0001EB;xxxx@0100:00009F
key = 0102030405060708091011121314
keepalive = 1
mgclient = 1
[account]
user = xxxx
pwd = xxxx
caid = 0100,0500
expdate = 2020-05-31
group = 10,20
ident = 0100:0001EB,00009F
[reader]
label = reader_md
description = PCSC_md
protocol = pcsc
device = 0
pincode = 0000
fallback = 1
caid = 0100
detect = cd
mhz = 450
cardmhz = 450
ident = 0100:0001EB
group = 10
disablecrccws = 1
[reader]
label = reader_mru
description = PCSC_mru
protocol = pcsc
device = 1
pincode = 0000
localcards = 0100:00009F
caid = 0100
detect = cd
nagra_read = 1
ident = 0100:00009F
group = 20
lb_weight = 300
Here are the configs.
Another problem that I am encountering is that am having lots of 'rejected group' and 'not found' in my logs.
I currently run 2 local cards, one using CAID 0100 and the other 0500.
I loadbalanced between the two. lb_weight is higher on the 0500 card. SO if its not cleared, it will move the 0100 card.
Hi SN30,
Thank you for your post.
AU is still not working. I thing EMM are sent on specific channels/mux. au = Locale is a reader label in my configuration.
Please find here:
[reader]
label = Inter
description = PCSC_1
protocol = pcsc
device = 0
pincode = 0000
fallback = 1
caid = 0100
detect = cd
mhz = 450
cardmhz = 450
ident = 0100:0001EB
group = 10
disablecrccws = 1
[reader]
label = Locale
description = PCSC_Locale
protocol = pcsc
device = 1
pincode = 0000
localcards = 0500:030F00
caid = 0500
detect = cd
nagra_read = 1
ident = 0500:030F00
group = 20
lb_weight = 300
Hello,
How can I prevent ECM requests from a specific channel to be send to all readers. I want only a specific reader to handle the ECM request.
Is this doable in OSCAM?
Here is the oscam.conf
[global]
serverip = ---
logfile = /var/log/oscam/oscam.log
netprio = 20
unlockparental = 1
nice = -1
maxlogsize = 2000
preferlocalcards = 2
reload_readers = 1
usrfile = /var/log/oscam/oscamuser.log
cwlogdir = /var/log/oscam/cw
[cache]
max_time = 1800
[newcamd]
port = 4433@0100:0001EB;4434@0100:00009F
key = 0102030405060708091011121314
keepalive = 1
mgclient = 1
[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
request_mode = 1
ecminfo_type = 1
boxtype = pc
[monitor]
port = 988
aulow = 120
monlevel = 1
[webif]
httpport = ---
serverip = ---
httpuser = ---
httppwd = ---
httphideidleclients = 0
httpallowed = 0.0.0.0-255.255.255.255
httpdyndns = ---
aulow = 120
httposcamlabel = OSCam_Webif
Any suggestions master G?
Any news please? master G?
What are the configs that you wish to see master G?
I wish to highlight that I am using services to block and allow channels on the readers from a user basis.
I wish to use the Locale reader as priority and Inter for any other channel which I have already selected on the oscam.services file.
oscam.services:
[bouquetclass]
caid = 0100
provid = 00009F
srvid = 0FA1,0FA2,0901,0097,001B,08F1,08B6,0015,0FA4,0908,0204,019D,009E,0906,0005,01A3,0024,0003,029A,0096,0202,01AF,0071,0904,01B1,0033,000C,0007,0008,01FA,019C,0910,022A,01F6,01A1,01FD,0228,0198,0013,08F5,01FC,000F,08AC,00AC,019A,0211,0203,000B,0902,01F5,0196,01F7,0900,0197,0072,0034
[bouquetinter]
caid = 0100
provid = 0001EB
srvid = 0002,0004,0009,000A,000C,000D,000F,0010,0017,0019,001A,0035,0036,0037,0067,0070,0095,0191,0192,0194,0199,019B,019C,019D,019F,01A0,01A8,01A9,01AA,01AB,01AD,01AE,01B2,01B3,01C2,01C3,01F8,01FA,01FB,01FE,01FF,0200,0205,0206,0209,0215,0217,0219,0229,022B,03F2,08B9,08FD,08FE,08FF,0905,0911,0916,0FA3,0FA5,0FA6,0FA8,0FA9,0FAA,0FAC,0FAD,0FAE,4871,0039,0227
oscam.user:
[account]
user = rhn
pwd = pass
keepalive = 0
au = Locale
group = 10,20
services = bouquetclass,bouquetinter
oscam.server:
[reader]
label = Inter
description = PCSC_1
protocol = pcsc
device = 0
pincode = 0000
caid = 0100
detect = cd
nagra_read = 1
group = 10
emmcache = 2,2,2,0
saveemm-u = 1
[reader]
label = Locale
description = PCSC_Locale
protocol = pcsc
device = 1
pincode = 0000
caid = 0100
detect = cd
nagra_read = 1
group = 20
emmcache = 2,2,2,0
I have attached the log file for a particular user.
Add au = Locale on one of the [accounts] in oscam.user that will be viewing channels from this card.
Hello master G, added the line and EMM still showing up as 0 on the users page.
Please advice.
Thanks master G, will give it a try and let you know.
I have another question:
When changing channels, some are almost instantaneous whereas others have a latency of around 1-2 secs. why is that so?
I am also using services to allow and block certain channels on the 2 cards that I have.
Thanking you,
Hello,
Currently ran into an issue with my system where my card has expired. I have put it into the original decoder and now only the
ADMIN part of the card has been extended until december and I have no entitlement available on OSCAM.
My first question is how to enable EMM through Oscam itself using AU?
I am using 2 cards with different channels.
Here is my configs:
[reader]
label = Locale
description = PCSC_Locale
protocol = pcsc
device = 1
pincode = 0000
caid = 0100
detect = cd
nagra_read = 1
group = 20
emmcache = 2,2,2,0
saveemm-u = 1
[newcamd]
port = 4433@0100:0001EB;4434@0100:00009F
key = 0102030405060708091011121314
keepalive = 1
mgclient = 1
Thanking you all.
Hello. How can we know the load on the card? Is there a way to measure and stay on a safe zone?
What is ths maximum number of clients per card that can be used?
Hi,
Currently have a working OSCAM running on a linux PC.
I currently have 2 cards, both from the same provider (CanalSAT) but number of channels differ on the cards.
I want to setup OSCAM to use the second card for a particular set of channels. I heard about dvbapi.
Can any one shed some ideas on how this can be acheivable? Thanks.
