Is it some Android-Box ?
STAPI - SH4 is receivers with Spark STI 7111 or 7162 Processors.
Openbox S6 (Lunux)
Is it some Android-Box ?
STAPI - SH4 is receivers with Spark STI 7111 or 7162 Processors.
Openbox S6 (Lunux)
What box and image are you using??
OSCam << cardserver log switched, version 1.20_svn, build r11546-798 (sh4-linux-stapi)
2022/01/29 21:32:21 00000000 s (main) System name = Linux
Has written down so
[reader]
The protocol and device on both readers are wrong. Use the reader configs seagen posted then share another oscam log.
With those options does not work absolutely
If one card works
If two does not work
Display MoreDo you mean SurfLock function in the firmware algorithm on the decoder card ? This feature prevents ECM requests from being frequent, such as sharing protection.
Of course, the problem can be elsewhere. Algorithm in the decoder card firmware, can contain any other functions.
For example, a decoding card may request to receive a particular EMM packet of a certain type, always on a regular basis, at certain time intervals. Sometimes it's once a month, other times it's a day, and other times it's 10 minutes, for example.
Of course, the problem may involve other things as well. Not what I mentioned above. However, you need to describe your problem (your question) in more detail.
Can I will help log
Display MoreYes the Nordic provider use the same caid:ident.
But s3n0 is correct this is no problem at all.
But if you where to use 2 CommonInterfaces you would have bigger problem ;)
Solution ther is CommonInterface assignment. Where you add correct channels to the correct CommonInterface
This settings works just fine
[reader]
label = Sweden
protocol = internal
device = /dev/sci0
detect = cd
mhz = 450
cardmhz = 2700
group = 2
emmcache = 1,3,10,0
blockemm-unknown = 1
blockemm-g = 1
[reader]
label = Norway
protocol = internal
device = /dev/sci1
detect = cd
mhz = 450
cardmhz = 2700
group = 1
emmcache = 1,3,10,0
blockemm-unknown = 1
Has written down so
[reader]
label = BigBang
protocol = stapi
device = SC0
detect = cd
mhz = 450
cardmhz = 2700
group = 2
emmcache = 1,3,10,0
blockemm-unknown = 1
blockemm-g = 1
[reader]
label = telekarta
protocol = stapi
device = SC1
detect = cd
mhz = 450
cardmhz = 2700
group = 1
emmcache = 1,3,10,0
blockemm-unknown = 1
(reader) BigBang [conax] Warning: needed try nr 2, next ECM has some delay
2022/01/29 21:36:02 67E47BBF c (ecm) root (0B00&/0000/190A/0582/67:B4B87347E84CB2CF3F623B7347992605.0947780A_008ED765828452582A7431CFF9638FEB HOP:00): found (107 ms) by telekarta (L/2/2/2)
2022/01/29 21:36:02 2B462E20 r (dvbstapi) stapi: STSMART-IFD: RawRead ErrCode: 720898
2022/01/29 21:36:23 2B462E20 r (reader) BigBang [conax] Warning: needed try nr 2, next ECM has some delay
2022/01/29 21:36:23 67E47BBF c (ecm) root (0B00&/0000/190A/0582/67:40E423F5A56971DE8B0BD399EBD13DA1.DF4BFF49_008ED76582845258959CC7F8B77C6396 HOP:00): found (105 ms) by telekarta (L/2/2/2)
2022/01/29 21:36:44 67E47BBF c (ecm) root (0B00&/0000/190A/0582/67:5CAC87F199318DF64C362AF44F6222BD.D6A7A8FC_8C5005E1971DC175959CC7F8B77C6396 HOP:00): found (105 ms) by telekarta (L/2/2/2)
2022/01/29 21:36:46 2B462E20 r (dvbstapi) stapi: STSMART-IFD: RawRead ErrCode: 11
2022/01/29 21:36:46 2B462E20 r (reader) BigBang [conax] Warning: needed try nr 2, next ECM has some delay
2022/01/29 21:36:47 2B462E20 r (dvbstapi) stapi: STSMART-IFD: RawRead ErrCode: 11
2022/01/29 21:36:58 67E47BBF c (dvbapi) Demuxer 0 Unable to open PMT file /tmp/pmt1_1.tmp -> stop descrambling!
2022/01/29 21:36:58 67E47BBF c (dvbapi) Demuxer 0 stopped descrambling for program 0582 (0B00@000000:0582 unknown)
2022/01/29 21:36:58 67E47BBF c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0B00 ECM_PID: 1770 PROVID: 000000
2022/01/29 21:36:58 67E47BBF c (dvbapi) Demuxer 0 ecmpid 1 CAID: 0B02 ECM_PID: 1771 PROVID: 000000
2022/01/29 21:36:58 67E47BBF c (dvbapi) Demuxer 0 found 2 ECM pids and 2 STREAM pids in CA PMT
2022/01/29 21:36:58 67E47BBF c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0B00 PROVID 000000 ECMPID 1770 ANY CHID PMTPID 0000 VPID 00C8
2022/01/29 21:36:59 67E47BBF c (dvbapi) Demuxer 0 found 2 ECM pids and 2 STREAM pids in PMT
2022/01/29 21:37:00 2B462E20 r (dvbstapi) stapi: STSMART-IFD: RawRead ErrCode: 11
2022/01/29 21:37:00 2B462E20 r (reader) BigBang [conax] Warning: needed try nr 2, next ECM has some delay
2022/01/29 21:37:01 2B462E20 r (dvbstapi) stapi: STSMART-IFD: RawRead ErrCode: 11
2022/01/29 21:37:01 67E47BBF c (ecm) root (0B00&/0000/1770/0321/37:F37FE1376477EE0D2CD1E7852A609639.7BDCE8D0_00000000000000000000000000000000 HOP:00): not found (2014 ms) by BigBang (F/2/2/2)
2022/01/29 21:37:01 67E47BBF c (dvbapi) Demuxer 0 restarting decoding requests after 1 ms with 1 enabled and 1 disabled ecmpids!
2022/01/29 21:37:01 67E47BBF c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0B00 PROVID 000000 ECMPID 1770 ANY CHID PMTPID 0321 VPID 00C8
2022/01/29 21:37:01 67E47BBF c (dvbstapi) overtake: clear pid: 0
2022/01/29 21:37:02 2B462E20 r (dvbstapi) stapi: STSMART-IFD: RawRead ErrCode: 11
2022/01/29 21:37:02 2B462E20 r (reader) BigBang [conax] Warning: needed try nr 2, next ECM has some delay
2022/01/29 21:37:03 2B462E20 r (dvbstapi) stapi: STSMART-IFD: RawRead ErrCode: 11
2022/01/29 21:37:03 67E47BBF c (ecm) root (0B00&/0000/1770/0321/37:926EBD1526445C306565BF6C0972E2DD.3376FAAB_00000000000000000000000000000000 HOP:00): not found (3910 ms) by BigBang (F/2/2/2)
2022/01/29 21:37:03 67E47BBF c (ecm) root (0B00&/0000/1770/0321/37:926EBD1526445C306565BF6C0972E2DD.3376FAAB_00000000000000000000000000000000 HOP:00): not found (1833 ms) by BigBang (F/2/2/2)
2022/01/29 21:37:03 67E47BBF c (dvbapi) Demuxer 0 restarting decoding requests after 4 ms with 1 enabled and 1 disabled ecmpids!
Display MoreYes the Nordic provider use the same caid:ident.
But s3n0 is correct this is no problem at all.
But if you where to use 2 CommonInterfaces you would have bigger problem ;)
Solution ther is CommonInterface assignment. Where you add correct channels to the correct CommonInterface
This settings works just fine
[reader]
label = Sweden
protocol = internal
device = /dev/sci0
detect = cd
mhz = 450
cardmhz = 2700
group = 2
emmcache = 1,3,10,0
blockemm-unknown = 1
blockemm-g = 1
[reader]
label = Norway
protocol = internal
device = /dev/sci1
detect = cd
mhz = 450
cardmhz = 2700
group = 1
emmcache = 1,3,10,0
blockemm-unknown = 1
On one card blocking by inquiries as it is possible to bypass it? In 30 minutes blocking is disconnected
Hi.
Please specify your question in more detail. What exactly do you want to achieve and where exactly is the problem? You have two identical 0B00 CAIDs (Conax encoding) but a different operator. If the operator is different, then this ident should be different and not 000000 for both, or am I wrong?
Use the basic configuration. Oscam can do everything himself. It tries to search for channel (PID) availability first on the first reader and then immediately on the second reader. If it finds and the ECM request is successful, it will be used this one card-reader for this one channel (PID).
Prompt how correctly to write down options in Oscam, there are two cards Conax different operators caid 0B00 and ident 000000 identical at cards and there is a conflict one card constantly works on other card writes the coded channel? Thanks.
Help to adjust oscam, two cards conax OB00 ident000000 different operators, there is a conflict how to adjust a clean sheet and to learn ECM oscam
Version: oscam-1.20_svn-r11635
Compiler: i686-linux-gnu-libusb-pcsc
Thanks.
What oscam can open crypton caid:0A07 ? thanks
Can to whom it is useful Reader has adjusted so: Devais mode Phonex power5.0v
[reader]
label = Reader-2
description = reader mouse
enable = 0
protocol = mouse
device = /dev/ttyUSB0
autospeed = 0
caid = 0B00
detect = none
cardmhz = 369
group = 1
emmcache = 1,3,2,0
saveemm-unknown = 1
saveemm-u = 1
saveemm-s = 1
saveemm-g = 1
Thanks all for the help!
Tell me how to check on the reader? There is a suspicion that the problem with him, does not read the map, ATR reads after you move the map. Thanks
I have another reader almost smargo on it such options and it works well
[reader]
label = telecarta
description = telecarta
protocol = smartreader
device = 002:002
smargopatch = 1
localcards = 0B00:000000
detect = cd
mhz = 534
cardmhz = 369
group = 1
emmcache = 1,3,2,0
Yes took there, the price nearby 15
reader mode: smartmouse jimper. does not open the channel?
[reader]
label = Reader-3
description = reader mouse
enable = 1
protocol = mouse
device = /dev/ttyUSB0
autospeed = 0
fallback = 1
caid = 0B00
detect = cd
mhz = 600
cardmhz = 369
ident = 0B00:000000
group = 1
2020/07/15 02:07:35 00000000 s (main) System name = Linux
2020/07/15 02:07:35 00000000 s (main) Host name = test-Ideapad-S120
2020/07/15 02:07:35 00000000 s (main) Release = 4.15.0-107-generic
2020/07/15 02:07:35 00000000 s (main) Version = #108~16.04.1-Ubuntu SMP Fri Jun 12 02:56:57 UTC 2020
2020/07/15 02:07:35 00000000 s (main) Machine = i686
2020/07/15 02:07:35 00000000 s (main) creating pidfile /var/run/oscam1.pid with pid 6071
2020/07/15 02:07:35 00000000 s (config) services reloaded: 0 services freed, 2 services loaded, rejected 0
2020/07/15 02:07:35 00000000 s (config) userdb reloaded: 5 accounts loaded, 0 expired, 0 disabled
2020/07/15 02:07:35 00000000 s (main) signal handling initialized
2020/07/15 02:07:35 00000000 s (config) 1141 service-id's loaded in 9 ms
2020/07/15 02:07:35 00000000 s (net) monitor: initialized (fd=5, port=988)
2020/07/15 02:07:35 00000000 s (net) newcamd: initialized (fd=6, port=6500)
2020/07/15 02:07:35 00000000 s (net) -> CAID: 0B00 PROVID: 000000
2020/07/15 02:07:35 00000000 s (reader) Reader-3 [mouse] creating thread for device /dev/ttyUSB0
2020/07/15 02:07:35 00000000 s (main) waiting for local card init
2020/07/15 02:07:35 0DD07046 h (webif) webif: decompressed 197522 bytes back into 426376 bytes
2020/07/15 02:07:35 0DD07046 h (webif) HTTP Server running. ip=0.0.0.0 port=5000
2020/07/15 02:07:35 121EDB19 r (reader) Reader-3 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=369)
2020/07/15 02:07:37 00000000 s (main) init for all local cards done
2020/07/15 02:07:37 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam1/oscam.emmcache in 0 ms
2020/07/15 02:07:37 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam1/oscam.emmstat in 0 ms
2020/07/15 02:07:37 00000000 s (anticasc) anti cascading disabled
2020/07/15 02:07:37 2B8B33A1 c (client) plain dvbapi-client granted (root, au=on (1 reader))
2020/07/15 02:07:37 263E808E c (newcamd) client connected to 6500 port
2020/07/15 02:07:37 2B8B33A1 c (dvbapi) dvbapi channelcache loaded from /usr/local/etc/oscam1/oscam.ccache
2020/07/15 02:07:37 2B8B33A1 c (dvbapi) Using TCP listen socket, API forced to DVBAPIv3 (0), userconfig boxtype: 11
2020/07/15 02:07:37 263E808E c (client) encrypted newcamd:6500-client xx.xx.x.xx granted (test good, au=on (1 reader))
2020/07/15 02:07:37 263E808E c (newcamd) user test good authenticated successfully (OSCam)
2020/07/15 02:07:37 263E808E c (newcamd) AU disabled for user test good
2020/07/15 02:07:38 263E808E c (ecm) test good (0B00@000000/0000/005C/67:0BEA65F8EA13057BF7869AA531D234E1): rejected group (0 ms) (no matching reader)
2020/07/15 02:07:38 263E808E c (ecm) test good (0B00@000000/0000/064D/67:3269A65B3E463BC9B903CFDD35D759E9): rejected group (0 ms) (no matching reader)
2020/07/15 02:07:38 263E808E c (ecm) test good (0B00@000000/0000/006C/67:65A1874B8A822CF83B4C184A0DFE7B97): rejected group (0 ms) (no matching reader)
2020/07/15 02:07:42 263E808E c (ecm) test good (0B00@000000/0000/0581/67:6CEBA9052CCE9DA4A93D973694EC6855): rejected group (0 ms) (no matching reader)
[reader]
label = Reader-5
description = Viva
protocol = mp35
device = 004:002
caid = 0B00
detect = cd
mhz = 600
cardmhz = 600
ident = 0B00:000000
group = 1
2020/07/14 15:53:16 2B8B33A1 r (reader) Reader-5 [mp35] ERROR: Opening device 004:002 (errno=2 No such file or directory)
cardreader_phoenix: yes
cardreader_drecas: no
cardreader_internal_azbox: no
cardreader_internal_coolapi: no
cardreader_internal_coolapi2: no
cardreader_internal_sci: yes
cardreader_sc8in1: yes
cardreader_mp35: yes
cardreader_smargo: yes
cardreader_pcsc: yes
cardreader_smartreader: yes
cardreader_db2com: no
cardreader_stapi: no
cardreader_stapi5: no
cardreader_stinger: yes
Bus 004 Device 002: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC |
iProduct 2 FT232R USB UART |
iSerial 3 AL016X0S |
[reader]
label = Reader-4
description = card
protocol = smartreader
device = 004:002
smargopatch = 1
caid = 0B00
detect = cd
mhz = 600
cardmhz = 600
ident = 0B00:000000
group = 1
saveemm-g = 1
On the input reader: quartz 6.00Mhz. power 5.0v, mode: phoenix
Hello. Help to adjust the reader. Is here such Phoenix Smartmouse card reader and a card conax, and OSCam: 1.20_svn Build: r11572 Compiler: i686-linux-gnu-libusb-pcsc. Tried to change reports but writes reader error. Thanks
Здравствуйте. Подскажите кто расшаривал карту NTV+ Vostok 0500 050C00 что нужно из оборудования и сколько можно будет подключить пользователей к карте чтоб она не заблокировалась? Спасибо
Здравствуйте. подскажите как можно расшарить карту caid 0500 ident 050C00, что нужно из оборудования? спасибо
Thanks for councils AU good
Will be AU card? Thanks
oscam log:
(emmcache) loaded 155 emmcache records from/tmp/.oscam1/oscam.emmcache in 7 ms
(emmcache) loaded 155 emmstat records from/tmp/.oscam1/oscam.emmstat in 2 ms
(dvbapi) dvbapi channelcache loaded from /usr/local/etc/oscam1/oscam.ccache
(client) encrypted newcamd:8000-client xx.xx.xxx.xx granted (my, au=on (1 reader))
(newcamd) user my authenticated successfully (WiCard)
(newcamd) AU enabled for user my on reader carta