So now the user is restricted to the 1810 card? Any way to unrestrict it?
I have 3 internal devices.
So now the user is restricted to the 1810 card? Any way to unrestrict it?
I have 3 internal devices.
Display Moreuse newcamd
in config
[newcamd]
port = 2153@1810:000000;2154@1803:000000
key = 0102030405060708091011121314
keepalive = 1
change caid to what you want to use
and
user
[account]
user = user
pwd = pass
caid = 1810
group = 1
cccreshare = 2
in cccam
N: oscam ip 2153 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
then use cccam to distrubute to others
With that settings worked!!
But how can I make with simple C: lines? One of my devices is quite old and do not accept N lines...
What is this caid = 1810 setting, any equivalent in C lines?
Display Morechange this
[account]
user = 91816554
pwd = 488115
monlevel = 4
group = 1,2
allowedprotocols = cccam
cccmaxhops = 4
keepalive = 1
to this
[account]
user = 91816554
pwd = 488115
group = 1,2
Same. No effect.
I do not see requests for channel decoding (ECM). Are your clients working properly ?
Cccam versions are set correctly ? Try other versions of the protocol. For example, try the 2.1.3 version or 2.0.11. However, I recommend that you remove this limitation of the cccam versions, to find communication errors.
My client version is 2.3.2 . I changed server version to 2.1.3 and 2.0.11 on changes. Also no ECM request appears on the logs..
Oscam Webif - LiveLog does not display any information about the decoding problem ? If it shows, then what exactly ? Check the LOG for what's going on there. If you do not know what to do with LOG information, show it here (empty any IP addresses, passwords, etc.).
I do not see any error on the logs....
Here they are:
2019/10/23 19:23:06 3B2B5E0D p (reader) XXXXXX: resolved ip=XXXXXX
2019/10/23 19:23:06 3B2B5E0D p (reader) cccam_server [cccam] connecting to XXXXXX:26781
2019/10/23 19:23:07 1AF1FB93 p (reader) XXXXXX: resolved ip=XXXXXX
2019/10/23 19:23:07 1AF1FB93 p (reader) cccam_server2 [cccam] connecting to XXXXXX:27681
2019/10/23 19:23:07 5EB3F8C6 p (reader) XXXXXX: resolved ip=XXXXXX
2019/10/23 19:23:07 5EB3F8C6 p (reader) cccam_server [cccam] connecting to XXXXXX:26681
2019/10/23 19:23:07 78CFD575 p (reader) cccam_server2 [cccam] proxy initialized, server XXXXXX:27681
2019/10/23 19:23:07 00000000 s (main) init for all local cards done
2019/10/23 19:23:07 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
2019/10/23 19:23:07 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
2019/10/23 19:23:07 5EB3F8C6 p (reader) cccam_server [cccam] proxy initialized, server XXXXXX:26681
2019/10/23 19:23:07 1AF1FB93 p (reader) cccam_server [cccam] proxy initialized, server XXXXXX:27681
2019/10/23 19:23:17 2D16F622 c (client) encrypted cccam-client XXXX granted (91816554, au=auto (7 reader))
2019/10/23 19:23:58 2D16F622 c (client) 91816554 disconnected from XXXXX
2019/10/23 19:24:10 372375D4 c (client) encrypted cccam-client XXXXX granted (91816554, au=auto (7 reader))
@Panda555 : nothing changes. Adding keepconnected = 1 does not made any effect.
Hi,
I have configured a oscam server that connect itself to several external ccccams. I want that the Oscam server serves to my home devices via CCCcam.
I already configured the "connections" and I the oscam server connects correctly to the external CCCcams, and my internal devices connects to the oscam server via CCCcam also correctly.....But the channels are not decoded on the devices, nothing is displayed on the TVs........
Here's my config:
==oscam.conf==
[global]
logfile = /var/log/oscam/oscam.log
nice = -1
preferlocalcards = 1
[cccam]
port = 12100
version = 2.3.2
reshare = 3
reshare_mode = 1
updateinterval = 200
keepconnected = 1
[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
delayer = 60
user = dvbapiau
boxtype = dreambox
[monitor]
port = 988
nocrypt = 127.0.0.1
monlevel = 4
[webif]
httpport = 8736
httpuser = root
httppwd = WEBPASS
httphideidleclients = 0
httpallowed = 0.0.0.0-255.255.255.255
==oscam.server==
[reader]
label=cccam_server
enable=1
protocol=cccam
device=XXXXX,26681
user=userCCCAM
password=488115
cccversion=2.3.2
group=1
inactivitytimeout=1
reconnecttimeout=30
lb_weight=100
cccmaxhops=10
ccckeepalive=1
cccwantemu=0
[reader]
label=cccam_server2
enable=1
protocol=cccam
device=XXXXX,26581
user=userCCCAM
password=488115
cccversion=2.3.2
group=2
inactivitytimeout=1
reconnecttimeout=30
lb_weight=100
cccmaxhops=10
ccckeepalive=1
cccwantemu=0
==oscam.user==
[account]
user = 91816554
pwd = 488115
monlevel = 4
group = 1,2
allowedprotocols = cccam
cccmaxhops = 4
keepalive = 1
[account]
user = dvbapiau
keepalive = 1
monlevel = 4
au = 1
group = 1,2
on my clients the CCCam is :
C: XXXXXX 12100 91816554 488115
No errors are shown. Either in webif or in server logs.
What I'm missing?
Thanks in advance
I found the problem.
The problem was the comments on the user line.
user = 91816554 #username from fline
removing everything after the # solved the issue..
Hi,
I have an oscam server acting as CCCcam server. The clients cannot connect. The server says account not found.
Here's my config:
==oscam.conf==
[global]
logfile = /var/log/oscam/oscam.log
nice = -1
preferlocalcards = 1
[cccam]
port = 12100
version = 2.3.2
reshare = 3
reshare_mode = 1
updateinterval = 200
keepconnected = 0
[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
delayer = 60
user = dvbapiau
boxtype = dreambox
[monitor]
port = 988
nocrypt = 127.0.0.1
monlevel = 4
[webif]
httpport = 8736
httpuser = root
httppwd = WEBPASS
httphideidleclients = 0
httpallowed = 0.0.0.0-255.255.255.255
==oscam.server==
[reader]
label=cccam_server
enable=1
protocol=cccam
device=XXXXX,26681
user=userCCCAM
password=488115
cccversion=2.3.2
group=1
inactivitytimeout=1
reconnecttimeout=30
lb_weight=100
cccmaxhops=10
ccckeepalive=1
cccwantemu=0
[reader]
label=cccam_server
enable=1
protocol=cccam
device=XXXXX,26581
user=userCCCAM
password=488115
cccversion=2.3.2
group=2
inactivitytimeout=1
reconnecttimeout=30
lb_weight=100
cccmaxhops=10
ccckeepalive=1
cccwantemu=0
==oscam.user==
[account]
user = 91816554 #username from fline
pwd = 488115 #password from fline
monlevel = 4
group = 1,2
allowedprotocols = cccam
cccmaxhops = 4
keepalive = 1
[account]
user = dvbapiau
keepalive = 1
monlevel = 4
au = 1
group = 1,2
on my clients the CCCam is :
C: XXXXXX 12100 91816554 488115
On my server logs I get:
Any idea?
Thanks