It appears that privately the new methods have been tackled but none will surface publicly for good reasons...
IPTV is sort of still reliant on the old system. Once this goes, I doubt we will see many HD sources unless traders look to spend £££ acquiring access to the new methods.
thanks for update. Emu file the same or does that need updating too?
Thank you! I'll try and test it out. I note the change log includes caid 1841 which I suspect is the one for VM UK?
where can I find emu file? Mipsel file is not the same?
How do I run this on zgemma running Wooshbuild without telnet/putty? I think it needs emu file?
Typo, probably - CS... ;)
Lol yes correct. Autocorrect!
Either way not allowed on the forum, Google however may help.
Oh of course. Sorry. Was there not a thread on this but working via on such matters. Anyways Google it is :)
Typo, probably - CS... ;)
Lol yes correct. Autocorrect!
wooshbuild openatv 6.1
It came with this and so I've left it as it is lol.
Display More
Read the 2nd post on page one of this thread
You can use cccam and mgcamd BUT they must be the patched versions
Or oscam with the configs from the same post
It can be on any image version
I applied the patches as per the text but this was on top of the old oscam. It actually worked to clear channels but took longer. I will try replacing the oscam file with newer version by simple overwrite as it will save me trying to install new one (old one already configured and works via softcam panel so overwrite will redirect to that)
Thank you atari. I would like to test it out so will see how to go about doing that on my zgemma h2h. From what I've read I will need to remove the existing softcam but they will need to be manually deleted unless I can just leave them?
Using a H2H at present and so far I'm impressed. It is not so slow but then again I've yet to try IPTV so not sure if channel list will make it slower. With dual tuner this is ideal for using softcam. On the lookout for reliable CD now lol.
excuse my ignorance but never heard of this plugin so what benefit is it over softcam panel on Zgemma? Also I can see ccam is latest but what about the oscam in the link provided?
I managed to just use an old oscam server on Zgemma and it worked but noted it was much slower at clearing than ccamd. Is oscam much better at clearing than ccamd? I suspect I need to use newer oscam maps but the existing one works fine for satellite but not for cable.
Which model zgemma and what firmware is on it
Zgemma H2H and OpenATV 6.1
I can update the cccamd and details for oscam but it was better with cccamd.
Ideally don't want to mess about with new flash when it should not be required other than updated mips binaries.
As you say a lot of this is server dependant, a lot of servers are crap, and you can polish a turd as much as you like but it will still be a turd....
Would be kind to let me know how well your sever works and whether they offer a trial to test out whether the patched firmware is working correctly. Would look at switching servers if it's better with yours.
I managed to just use an old oscam server on Zgemma and it worked but noted it was much slower at clearing than ccamd. Is oscam much better at clearing than ccamd? I suspect I need to use newer oscam maps but the existing one works fine for satellite but not for cable.
I'm assuming this can be used for VM as well? Do we need to add caid for disabling CW?
Display MoreDisplay More
i moved your posts to another thread, the cable fix was in the other thread is specific to enigma2 based boxes using oscam, or patched versions of cccam and mgcamd.
As you say a lot of this is server dependant, a lot of servers are crap, and you can polish a turd as much as you like but it will still be a turd....
This box is not enigma2 in the sense of being able to run any e2 code. Only channel list is updated via e2 database.
Display MoreDisplay MoreUpdate:
So the box has no means of updating cams per say and so I just updated the entire firmware which contained the updated emus. There are no official new update builds for this box so I just made an unofficial firmware update! After many attempts and nag screens telling me firmware was not for that box model I finally fixed it!
Works well! In fact seems like it is better at scanning TP than before. Only issue is the CCAM used is possibly the issue unless channels not clearing due to CAID they are on? Some channels seem to clear perfectly but others not clearing - used one of those free CCCAM lines and it did clear certain channels so I suspect some issue still on server side? Or maybe issue with ccamd client?
Also I am able to use ccamd or camd35 protocols. The latter shows CAID and takes longer to clear than using ccamd (if it does at all). There is also cs378x but this causes box to reset.
There is hsdata.cfg upload option which allows you to configure various servers but I'm not sure how to use it but I suspect it will allow better scripting for ccam since it is command line driven and not limited to modifiable options using box own GUI.
Let me know if update is allowed to be posted and I'll upload. The same technique could potentially be used for other box that are unsupported provided there is a firmware that could be merged with updated components.
It would be nice if you could upload the file so we can use, As im not having much luck with it.
What box are you using? This could brick your box if you install the wrong firmware. It works on my STC3220 but that's because I used the firmware as a base for modification.
Zgemma H9.2H
you're better off using appropriate build for your box eg OpenATV or PurE2
i moved your posts to another thread, the cable fix was in the other thread is specific to enigma2 based boxes using oscam, or patched versions of cccam and mgcamd.
As you say a lot of this is server dependant, a lot of servers are crap, and you can polish a turd as much as you like but it will still be a turd....
This box is not enigma2 in the sense of being able to run any e2 code. Only channel list is updated via e2 database.
Display MoreDisplay MoreUpdate:
So the box has no means of updating cams per say and so I just updated the entire firmware which contained the updated emus. There are no official new update builds for this box so I just made an unofficial firmware update! After many attempts and nag screens telling me firmware was not for that box model I finally fixed it!
Works well! In fact seems like it is better at scanning TP than before. Only issue is the CCAM used is possibly the issue unless channels not clearing due to CAID they are on? Some channels seem to clear perfectly but others not clearing - used one of those free CCCAM lines and it did clear certain channels so I suspect some issue still on server side? Or maybe issue with ccamd client?
Also I am able to use ccamd or camd35 protocols. The latter shows CAID and takes longer to clear than using ccamd (if it does at all). There is also cs378x but this causes box to reset.
There is hsdata.cfg upload option which allows you to configure various servers but I'm not sure how to use it but I suspect it will allow better scripting for ccam since it is command line driven and not limited to modifiable options using box own GUI.
Let me know if update is allowed to be posted and I'll upload. The same technique could potentially be used for other box that are unsupported provided there is a firmware that could be merged with updated components.
It would be nice if you could upload the file so we can use, As im not having much luck with it.
What box are you using? This could brick your box if you install the wrong firmware. It works on my STC3220 but that's because I used the firmware as a base for modification.
Update:
So the box has no means of updating cams per say and so I just updated the entire firmware which contained the updated emus. There are no official new update builds for this box so I just made an unofficial firmware update! After many attempts and nag screens telling me firmware was not for that box model I finally fixed it!
Works well! In fact seems like it is better at scanning TP than before. Only issue is the CCAM used is possibly the issue unless channels not clearing due to CAID they are on? Some channels seem to clear perfectly but others not clearing - used one of those free CCCAM lines and it did clear certain channels so I suspect some issue still on server side? Or maybe issue with ccamd client?
Also I am able to use ccamd or camd35 protocols. The latter shows CAID and takes longer to clear than using ccamd (if it does at all). There is also cs378x but this causes box to reset.
There is hsdata.cfg upload option which allows you to configure various servers but I'm not sure how to use it but I suspect it will allow better scripting for ccam since it is command line driven and not limited to modifiable options using box own GUI.
Let me know if update is allowed to be posted and I'll upload. The same technique could potentially be used for other box that are unsupported provided there is a firmware that could be merged with updated components.
Display MoreI have an Icecrypt STC3220CCIHD. I don't see any FTP option or anyway of updating softcams. In fact, there was a modified firmware by ColdAsICE who enabled these options.
Any ideas how I can update the firmware or even if there is anyway of updating softcam (and which version would I need?).
Thanks in advance :)
Blast from the past that one, is it even enigma2 based ? What cams dose it currently run ??
I thought it was Enigma2 but it only has e2 database loader (no idea what that even refers to).
Under IP client it has various cams inc cccam, newcamd, mgcamd, homecamd etc. You can only select them but not update. It allows channel and software update via USB but doesn't strictly have a plugin section like other boxes.
Looking online, it is similar to Amiko8260+ since there is a mention of using the Icecrypt STC3220CCIHD firmware on the Amiko8260+.
I cant see any way of even getting FTP to the box, checked open ports on IP and there was nothing really apart from straight port which was not related to file sharing protocol.
